How to set up the jcg router, how to set up the WiFi on the jcg router

JCG router, its "smart" refers to a series of functions that "like a personal computer, it has an independent operating system, which can be installed by the user, control the bandwidth by himself, control the number of people who clear the car, control the browsing of the web by himself, and control the time". Let's take a look at how to set up the JCG router. Imitation.

How to set up the JCG router

First, power on the JCG wireless router and connect the wireless router to the computer with a network cable. Turn off the Wi-Fi and turn on the local connection. Check the IP address of the wireless router and enter the IP address on the web page, the default IP address is.

Enter to enter the wireless router's settings page and click to answer the Quick Setup Wizard.

Enter the default admin username and password, username admin, password admin Click OK.

Click Next. I use telecom, I need to enter and password to choose PPPoE, and for other network operators, follow the network operator's provision'Select DHCP or fixed IP address for the data, and click Next.

In general, the settings are default, the frequency switch is selected to be on, the frequency working mode is selected to be mixed, the SSID is the user name of the wireless network, which can be changed according to your wishes, pay attention to set it to Chinese. Hide the option to deactivate, the channel can be selected freely, in general, the default channel is 6.

After the setting is completed, click Next, click Apply, and the preliminary setting is completed.

The system restarts.

Go back to the home page and tap Advanced Settings.

Select Wireless Settings --- Security Settings --- change the authentication key (the connection password for your wireless router).

Here's how it works:1Wiring method: ** wire to the ADSL network port of Modem, LAN network port of Modem to the WAN port of the wireless router, LAN network port of the wireless router to the computer network port;

2.Right-click the network connection icon in the lower right corner of the desktop on the computer - Open Network and Sharing Center - Local Connection - Properties - Internet Protocol Version - Set the IP address and DNS server address to be obtained automatically;

3.Open any browser on the computer, enter the address bar for details on the back of the wireless router), enter the administrator and password to log in to enter the background;

4.Setup Wizard, the next step, generally will pop up automatically, if not, click the Setup Wizard on the left side;

5.The wireless router selects the Internet access mode by default, here the broadband dial-up is used as an example, the next step (dynamic or static network cable without dial-up, the wireless router will automatically jump to the wireless network setting interface after default recognition);

6.Fill in the broadband dial-up and password, the next step (the broadband dial-up and password given by the operator when reporting the installation of network cables);

7.Set up the wireless network (avoid using Chinese characters), choose the encryption method and set the encryption password (the encryption password file to avoid using simple numeric passwords, it is recommended to configure the size of the scribbling letters, numbers and special symbols together, the most important thing is to remember);

8.Click to complete the Internet settings on your wireless router.

Note: The modification of the local connection IP address and DNS server address is operated in the Windows 7 system environment, **For reference only, the details are based on the specific wireless router version and model.

JCG Router Password Setup Steps:

First of all,The wireless router I just bought has a password when it leaves the factory, like JHR-N815R, this router is one machine and one code, each router has its own password, and each one is different. This will keep you safe online. So can this password be found in **?

Let's look at the back of the router.

If you want to change the password or encryption method, you need to go to the router's settings page.

The detailed steps are as follows:

Connect the router with a network cable, and then enter it into the router on your browser'On the Settings page, click Wireless connection. Go to the wireless settings page.

Click "Security Settings" here to enter the security settings page and set a wireless password.

If the security mode is "WPA Personal" or "WPA2 Personal", then the modified password must be more than 8 digits of numbers or letters, Note: The letters here are case-sensitive.

Note:There is a place to pay attention to here, that is, in the "slow and standby security mode", the default security mode at the factory is "WPA2 personal", this security mode is more advanced, if your system is windowsXPesselpack2, then your computer does not support this advanced security mode, you need to choose "WPA personal" this security mode.