Is there any subcontracting on the outside of the anti corrosion galvanized layer of the street lamp

Street light poles are an important part of urban road lighting facilities, in order to ensure their long-term use and prolong service life, anti-corrosion treatment is indispensable. In the anti-corrosion treatment of street lamp poles, in addition to the galvanized layer, there are other anti-corrosion measures that need to be subcontracted.

First of all, galvanized coating is one of the main ways to treat street lamp poles with anti-corrosion. Galvanizing is to immerse the surface of the street lamp pole in molten zinc to form a uniform zinc layer on the surface, so as to play the role of anti-corrosion. This step is usually carried out by a professional galvanizing manufacturer, who will operate according to the size and requirements of the street light pole to ensure the quality and effect of the galvanized layer.

In addition to the galvanized layer, the anti-corrosion treatment of street lamp poles also includes the spraying of anti-corrosion paint. Spraying anticorrosive paint is to spray a layer of special anticorrosive paint on the surface of the street lamp pole to form a protective film and play the role of anti-corrosion. This step is usually carried out by a professional painting company, who will select the appropriate anticorrosive paint according to the material and requirements of the street light pole and carry out the spraying operation.

In addition, the anti-corrosion treatment of street lamp poles also includes the construction of anti-corrosion cladding. The anti-corrosion coating layer is to wrap a layer of special anti-corrosion material on the surface of the street lamp pole to form a protective layer and play the role of anti-corrosion. This step is usually carried out by a professional anti-corrosion wrapping company, who will select the appropriate anti-corrosion material according to the material and requirements of the street lamp pole, and carry out the wrapping construction.

In the anti-corrosion treatment of street lamp poles, galvanized layer, spraying anti-corrosion paint and anti-corrosion wrapping layer are commonly used anti-corrosion measures. These antiseptic treatments are usually carried out by professional subcontracting companies who have extensive experience and professional skills to ensure the quality and effectiveness of antiseptic treatments. At the same time, the subcontractor can also provide personalized anti-corrosion solutions according to the specific situation and requirements of street light poles to meet the needs of different customers.

In short, in addition to the galvanized layer, there are other anti-corrosion measures that need to be subcontracted in the anti-corrosion treatment of street lamp poles. These anti-corrosion treatments are usually carried out by professional subcontracting companies, who are able to provide high-quality anti-corrosion treatment services, ensuring the long-term use and longevity of street light poles.

If you have a large amount of work.

Of course, it can be subcontracted.

It is possible to subcontract out the labor.

It can also be subcontracted out in conjunction with the materials.

There's no job that can't be done.

It is rare to see such a serious thing, it is possible that there is something in this position, so it is serious to give Xiangxing empty his supplementary food, or it is blind that someone has poured something in this area.

Of course, there have been street lamp poles that are particularly corroded, because its perennial paint has fallen off, and no one cares, and the corrosion is very strong.

The railings of street lamps generally need to be anti-corrosion, or they are built with reinforced concrete.

In fact, what you do does not play a good role in rust prevention, hot-dip galvanizing is a good thing, but there are great reasons for rust and ultraviolet rays on the lamp pole, it is recommended that you do anti-ultraviolet treatment.

The 3-meter-high street lamp pole can be anti-corrosion for 30 years after hot-dip galvanizing treatment, and the surface can be sprayed again. No more electroplating purple bronze.

After hot-dip galvanizing, standard hot-dip galvanizing can generally be guaranteed for 15 years.

Hello, I am a staff member from Yangzhou Junsheng traffic engineering, the first thing to do is the galvanizing of the street lamp pole, galvanizing is to immerse the lamp pole in the zinc cylinder (the zinc temperature in the zinc cylinder is above 600 degrees, in a liquid state), when the street lamp pole is immersed in the zinc cylinder, the steel part of the lamp pole is combined with the high-temperature zinc, and a galvanized layer with a thickness of about 85um will be attached to the surface of the lamp pole. This is galvanized treatment, because there is a layer of zinc on the surface of the galvanized lamp pole, it will not rust, and the anti-corrosion life can reach more than 30 years.

After the street lamp pole is galvanized, the surface is polished and sprayed with plastic (the street lamp pole after spraying can be customized in color).

The most basic street lamp pole is galvanized, if it is not galvanized, directly sprayed, then the life is not long, at most half a year will begin to rust, and the spray layer will also fall off. It greatly affects the life of the street light pole, for reference only.

This one is generally like this: grinding.

Galvanized (hot-dip galvanized is best) painted.

Some of the poles are made of stainless steel, but most of them are painted with protective paint. (The inside is still a steel pipe) protective paint is mainly anti-embroidery.

If it has been corroded.

Sand it clean with sandpaper.

I remember to adopt it in spray paint.

The general street lamp pole is hot-dip galvanized, and galvanizing is divided into electroplating and hot-dipting. Electrogalvanizing is to deposit the electrons of the anions or cations of zinc into zinc atoms, and then passivate them after electrogalvanizing to obtain various colors and anti-corrosion properties, with a general thickness of a few to twenty microns. Hot-dip galvanizing is about four zinc melting and then hot dipping, also known as mechanical plating, with a general thickness of 30-50 microns.

Mechanical galvanizing is used in large engineering parts, such as street lamp poles, highway fences, etc., because of the thick coating, good corrosion resistance. Electrogalvanizing is used in general decorative parts or structural parts, such as standard parts such as screws, and internal parts of automobiles.

The anti-corrosion of the surface of the street lamp pole is generally galvanized, and the galvanizing is divided into hot-dip and ordinary galvanizing, and the effect of hot-dip galvanizing is better;

Galvanizing is a kind of electroplating, and there is another kind of shiny plating that is chrome plating, because chromium is a non-ferrous metal, and the cost is relatively high.

Basically, it is hot-dip galvanized, the plating is much thicker than the electroplating,,, electroplating is not suitable for anti-corrosion of power equipment, of course, it is also expensive

The anti-corrosion of street lamp poles can also be coated with acrylic polyurethane, with good weather resistance and strong adhesion, and we have done 10 years of experience in the renovation of old street lamp poles!

It can also be painted, which is more corrosion-resistant than galvanizing.

Hello, you can brush the anti-corruption materials, this is also possible. Thank you!