Every time I turn on the faucet, the water is yellow, it feels so dirty, is there any good way to so

It may be caused by rust in the water pipe, which is generally more common when the faucet is first opened, and if the water turns yellow for a long time, it is a problem with the tap water itself. Boil the water and see if there is yellow precipitation, which means that it is loess or iron show, and if there is none, it is the deterioration of reservoir water. Removal of faucet method:

1. Use a clean rag to dip an appropriate amount of toothpaste and wipe the faucet. 2. Some dead corners that are difficult to reach with a rag can be wiped with a toothbrush dipped in toothpaste. But remember, never "torture" the faucet with acidic or abrasive detergents, wire brushes, so as not to damage the surface of the faucet.

3. Only by removing the dirt can we completely avoid the breeding of bacteria and make the bathroom environment healthier.

A pre-filter can be installed.

My house is installed with a pre-filter for the AD pipeline, and the effect is very good! According to the clerk of his house, the pre-filter of the A.D. pipeline adopts blue crystal nanotechnology, lead washing passivation process, and the head is made of national standard brass.

With the blessing of these high-tech technologies, it can effectively filter harmful substances such as sediment and accelerate the complete restoration of clean water quality, so that families can use clean and healthy water.

1. Use a clean rag to dip an appropriate amount of toothpaste and wipe the faucet. 2. Some dead corners that are difficult to reach with a rag can be wiped with a toothbrush dipped in toothpaste. But remember, never "torture" the faucet with acidic or abrasive detergents, wire brushes, so as not to damage the surface of the faucet.

3. Only put.

Generally speaking, if the water released from the faucet for the first time in the morning is yellow, it is rusty inside the pipe.

One, the problem of water Second, the faucet is not copper, it is rusty.

This situation is generally the pipeline maintenance, a large area of water stopping, after the overhaul of the water pipe in the home will appear yellow or rusty water, it is recommended to open the faucet at home, let the water flow more will be used.

There is also a small amount of sediment mixed in the water pipes, such as on rainy days.

This situation may occur, if the water flowing out has been yellow, it can be that the water quality is polluted, it is recommended not to drink it, and give it to the relevant departments**.

What happens to the yellow water from the faucet of the newly renovated houseIn fact, there are several reasons for the yellow color of the water:1The pipe at home is made of galvanized iron pipe, and the service life of the water pipe is also relatively long, when the faucet is turned on in the morning, the flow rate of the tap water in the pipe changes suddenly, and the rust attached to the pipe wall washes down.

2.The water, iron, and manganese valence ions in the water pipe are oxidized by residual chlorine to form ** ions, so the water is yellow. 3.

If the community where you live has a secondary water supply facility, if you do not clean the pool or tank regularly, it will lead to the growth of bacteria and algae in it, and pollute the water stored in the tank, which is the secondary pollution of tap water. 4.If the water coming out of many households in the community is yellow in the morning, but the secondary water supply facilities in the community have just been cleaned, then the problem is likely to be that the tap water is contaminated in the main water supply pipe.

5.If the pipe used in the home is made of PPR (plastic pipe), if there is yellow water flowing out, and it comes and goes, it is likely that the water pipe is dirty, and some fungal and algae substances have accumulated inside the pipe wall, causing the color of the water to turn yellow6The tap water in the faucet and water pipe that has been out of use overnight is static, and the water and the metal pipe wall and the metal chamber of the faucet will produce a hydration reaction to form metal contaminated water, and the residual microorganisms in the tap water will also multiply, this water contains a large number of harmful substances to the human body, and may also hide an acute respiratory infectious disease that threatens human health - Legionella.

In short, there are many reasons for the yellowing of the water, the most easily ignored is that the water pipe is dirty, many people don't know why the water pipe becomes dirty, in fact, you can take a glass of water from the faucet, and then let it stand, after 24 hours, we will find that there will be some impurities at the bottom of the cup, and the wall of the cup will be slippery to the touch. This is because microorganisms attach to the walls of the cup and multiply and grow, forming a layer of bacterial film, just like a stone in water, which becomes a layer of slippery dirt.

The reason why the water that has been flowing in the water pipe is yellow:

1. Maybe it is because.

Caused by rust on the inner wall of the DAO pipe; Return.

2. The water source treatment is not clean or suffers from major pollution;

3. There is yellow sand entering and the precipitation is incomplete Reason: pipeline aging or chemical reaction.

Because the underground cast iron pipe network has been used for a long time, the phenomenon of yellowing of tap water is not excluded from the aging of the underground pipe network, and the other reason is that there are two water sources in Hoh, one is groundwater and the other is the Yellow River water, and the water we drink now is basically a mixture of these two waters. "The water quality of these two types of water is up to standard, but the production process and temperature are different, and when the two are fused, they react, causing the water to rust off and cause the tap water to turn yellow.

It should be precipitated water rust.

You can leave it for a while and it will be clean.

Or go to the hospital and buy a mask, because the mask is made of gauze, it has a filtration function, you can put the mask on the faucet and then tie it, and whoever fixes it out will be clean after the mask filtering, but the mask must be disposed of or replaced regularly.

It may be caused by rust in the water pipe, which is generally more common when the faucet is first opened, and if the water turns yellow for a long time, it is a problem with the tap water itself.

The iron pipe or iron water faucet will rust overnight, so the water flowing out in the morning is yellow, mainly because of rust, such water is harmful to the human body, so don't eat the water that flows out of the water pipe just after opening it in the morning, let it be put for a while, and wait for the water to be clear, and then use it will be fine.

Precautions for the use of faucets at home.

1. When using for the first time, first let the water flow fully through cold water, so that all the air in the cavity is discharged, and then turn on the power supply, which can greatly increase the service life of the hot and cold water faucet. If you encounter a problem of failure when using the hot and cold water faucet, you can judge the cause of the failure according to your actual situation.

2. Wipe the shell stains with a soft cloth frequently to keep the appearance of the product smooth and clean. If the tap water pressure is normal, and the hot water flow is small, please cut off the power supply to check whether the water inlet filter of the hot and cold water faucet nozzle is blocked, if there is a blockage, you can use a sewing needle to dredge the small holes and clean off the debris, keep the water channel unblocked, do not clean the shell or pour water on the body when the power is on.

Replace it or put the dirty water in it, which usually happens after a long time of unused faucets.

If it is rust-colored water, the pipe (iron pipe) is already rusty, replace the pipe. If it is a plastic pipe that is advocated, and the water coming out is not clear, then it is necessary to check whether the water tank is dirty and has not been cleaned for a long time, please clean the property.

When purchasing, consumers should try to choose a faucet with an aerator, and feel the water flow with their hands, and the water flow is soft and foaming (water flow bubble content) is rich to indicate that the aerator is of good quality.

The aerator is usually six layers, usually made of a metal grille (partly plastic), through which the water is cut into a large number of tiny jets of water mixed with air so that the water does not fall apart.