How to separate dry and wet? How to design the best dry and wet separation?

The separation of dry and wet must take into account the rationality of the moving line, the division of the dry area and the wet area and the formation of a closed space is the best, the waterproofing of the wet area of the bathroom must be done, and the dry area is no exception.

By installing a glass door on the outside of the bath and shower, you can separate the wet and dry areas. When designing glass doors, it is best to design them in a rounded shape, which can save space and make them more beautiful.

The washbasin and bath cabinet, the toilet as the dry area, and the shower bathtub as the wet area should be designed according to the layout of your bathroom, which can be designed as an L-shaped or polygonal shape.

Dry and wet separation is a necessary procedure for us to decorate the bathroom, if we do a good job of dry and wet separation, it can bring us a lot of convenience in daily life and reduce trouble. Today, I will share with you some knowledge about the separation of dry and wet, full of dry goods, brothers like the collection and pay attention.

First, let's talk about some core knowledge about wet and dry separation:

1) The external handwashing station is the most effective way to separate dry and wet.

2) There are 4 ways of dry and wet separation: shower curtain, glass, half wall, and shower room.

3) Design a dry and wet separation toilet with an area of at least 3 square meters.

1) The ground and wall should be coated twice with waterproofing, following the principle of horizontal and vertical intersection and thin coating of multiple layers.

2) When the bathroom is paved with bricks, there should be a certain slope of drainage, from the corner of the wall to the floor drain, and each meter of distance can be dropped by one centimeter.

3) There are at least two floor drains in the bathroom, one under the sink and one in the shower.

4) The glass of the shower room should not be too thick, 6-8mm tempered glass is enough, and finally the tempered glass is pasted with explosion-proof film to ensure safety.

(1) Four separation: clean and hygienic, do not interfere with each other when used, and effectively improve the efficiency of toilet use.

(2) Three separation: It is the most suitable separation layout for Chinese families by subtracting non-essential washing machines, washbasins, bathtubs, etc. according to their own requirements.

3) Two separation: the shower area and toilet are retained, and the washbasin is placed next to the toilet, which is simple to configure, and can also make a simple dry and wet partition.

So which families don't recommend doing dry and wet separation?

Although the dry and wet separation is good, it is not suitable for all families, families with children, basically need children to help wash, this kind of dry and wet separation of hard partition, the space is narrow, and it is not easy to operate.

There is also a squatting toilet with a relatively small area, because the ground leveling is not easy to do, there is usually no floor drain, and it is not recommended to do dry and wet separation.

Dry and wet separation is to use glass or metal to make a baffle, the bathing place and the toilet are separated, this is the dry and wet separation, dry and wet separation can be separated by glass, so the design is very good, the bathroom area is relatively small family is not suitable for dry and wet separation, after doing it will make the bathroom space smaller.

The key to wet and dry separation is to use physical isolation to separate the restroom area into wet and dry areas. The wet area mainly refers to the shower area and bathtub area, while the dry area includes the toilet bowl, sink and other areas that usually use less water. The design of the separation of wet and dry mainly depends on the shape and condition of the restroom itself.

Partitions can be made of glass, brick walls and other materials, fan-shaped or diamond-shaped shower rooms can also be installed, and even the simplest shower curtain can be used to separate the dry and wet areas, which can also be regarded as a kind of dry and wet separation in a broad sense. Dry and wet separation is not suitable for all families and apartment types, for example, the bathroom area is relatively small, the occupancy is relatively large, and there is no double bathroom setting, you need to carefully consider whether to carry out dry and wet separation.

It can be used separately, it can not breed bacteria, and it can prevent the bathroom from getting wet, which is the benefit of separating the toilet from dry and wet. The bathroom can be divided into two spaces, one for showering and the other for daily life.

It can improve the standard of living, it is particularly easy to clean, it can increase the service life of the equipment, and it can also ensure the dryness of the air and will not be corroded by water vapor. There should be design skills, according to the size of the space in the bathroom, and at the same time to do a good job of distribution in terms of layout.

To solve many practical problems and make the bathroom more clean, hygienic and more convenient to use, is to separate the shower room from the toilet, which can be partitioned with some glass to separate dry and wet.

It can make the bathroom very clean, look more comfortable, very convenient to use, and very easy to clean. Be sure to make a layout in advance, choose the right materials for decoration, and choose a curved shower room.

Dry and wet separation in the bathroom can improve the living efficiency of the occupants. This is especially true for families with large populations.

For example, when you get up in the morning, you are rushing to work and going to school, and you are crowded together, so if you make a mode of dry and wet separation, the use of the toilet and brushing your teeth and washing your face can be carried out at the same time without interfering with each other. It greatly improves the efficiency of the use of the toilet.

For example, the bathroom can also be designed to separate dry and wet; First determine the location of the washbasin and toilet and bath, buy the toilet and washbasin as small as possible, leave more places to do dry and wet separation, you can use glass, you can also use a curtain to separate the dry and wet.

It can be done, in order to ensure that the toilet and sink can give people a comfortable space at the same time in the shower area to make a glass partition, forming a dry and wet separation, the glass partition because it is transparent, will give people a sense of spatial magnification, not because the space is too small and very depressing, the shower area with a shower curtain and a water barrier.

Yes, you can move the sink inside to the outside of the bathroom to design a good dry and wet separation, which will also make the bathroom space particularly large and spacious.

The smoke is not Penglai Xiandao, but the bathroom of your home. The mirrors, bathroom cabinets, and floors are always steaming, and you are annoyed by cleaning every day. Wet and dry separationSeparating the "dry" washbasin and toilet area from the "wet" shower area is an excellent solution.

Do a good job of separating wet and dry, and don't worry about who cleans the bathroom every day! However, the concept of wet and dry separation is simple, but how does it work? Take a look at the 5 ways below.

1. Shower curtain + water retaining strip:

The main source of moisture in the bathroom is the shower area, so the easiest and quickest way is to hang a shower curtain on the top and a water strip on the bottom. This combination can basically isolate the water flow, the installation is simple and convenient, and the cost is also low, which is a very practical method. Water retaining strips are usually artificial stone fixed to the ground, and movable plastic water retaining strips are also very popular because of their ease of installation.

The only thing to pay attention to is to leave enough space in the shower area to avoid touching the shower curtain when taking a shower.

2. Shower curtain + wet area sinking:

If you feel that the water retaining strip is not good enough, you can also try to do wet area sinking. The shower area is divided by the height difference, and the shape is simple, and the water flow is difficult to flow from low to high.

3. Local partition:

The key to water mist is the shower head, so there is also a way to make a partial partition near the shower head only. For small apartments,Partial glass partitions do not block the view of the sails, keeping the bathroom bright and open.

4. Shower room or shower sliding door:

In this way, the shower area is completely isolated and independent, and does not give the water a chance to "go out", which makes people feel very safe. The glass sliding door has low requirements for the size of the space, as well as a transparent and bright appearance, and solves the problem of "touching the shower curtain when taking a bath" that makes your scalp numb, and is the preferred way for many family bathroom decoration.

, three separation:

We were probably the first to experience a bathroom with this structure in a hotel. The dry area is open, the wet area is closed,A door completely insulates the damp mist from the room. In addition, the separation of functional areas allows them to be used simultaneously.

One goes to the toilet, the other brushes his teeth and washes his face, and goes out in the morning without "congestion".。Because of its cleanliness and convenience, this structure is now quite popular. Many families have demolished the original bathroom walls and moved some reconstructions into the bathroom, thus transforming the dry area once and for all.

The above 5 methods are not superior or inferior, and the one that suits them is the best. According to the habits of yourself and your family, consider the design of the bathroom in advance, do a good job of dry and wet separation, and don't have to worry about who cleans the bathroom every day!

You can get it for free

The bathroom is the most common and frequent area we use in our daily life, so the owners are very concerned about it when decorating, but because there is more water, it will lead to water stains on the ground, and it is very inconvenient to use, so many owners will choose the method of dry and wet separation will be much more convenient, so,Wet and dry separationWhat are the methods? What are the benefits of wet and dry separation?

1. What are the methods of dry and wet separation?

1. You can choose the door of the bathroom to open outward, and the bathroom generally chooses more swing doors, which requires Song Yuanjian to tell everyone that the opening direction of the bathroom door is also very important, and opening outward can save space for the bathroom. Of course, you can also choose sliding doors, but be sure to put the quality of the hardware first.

2. You can use the method of combining the shower area and the washing area to separate, and if the bathroom space is small, don't choose a good-looking and practical bathroom cabinet, only put a washbasin, which can be combined with the shower to use a space and bring two functional areas to the family.

3. If you feel that the shower room occupies more space, you can use the shower curtain to separate, although it cannot guarantee that the dry and wet separation is very thorough, but it is more practical to choose this in life.

4. If the space is limited, there is also the best way to move the dry area outward, which is to say that our bathroom cabinets and washing machines can be placed on the balcony or other spaces, pay attention to the toilet and shower must not be moved out.

5. There are many owners who feel that the bathroom space is small, so you can choose the shower room shower method, which can solve the problem of dry and wet separation, then you are really wrong, because the bathtub will not only occupy most of the bathroom area but also waste a lot of water resources. The shower room can completely avoid these and can also achieve effective dry and wet separation.

Second, the benefits of wet and dry separation.

1. It can improve the utilization rate very well, if there are more members in the family, then it is best to choose the dry and wet separation method, which can greatly improve the utilization rate and increase the usable area. Moreover, multiple people can use the bathroom at the same time, and different spaces can be used for each other without affecting each other.

2. It can inhibit the breeding of bacteria, and the bathroom can maintain the dryness of the area outside the shower by using dry and wet separation, and the viruses and bacteria inside cannot be attached to the toiletries with the dispersion of the air. This inhibits the growth of bacteria in the restroom.

3. The bathroom can be divided into two to maintain the hygiene of the environment, so as to keep the space outside the bath relatively dry and hygienic, and keep the whole bathroom environment clean and tidy.

4. It can reduce the probability of accidental injury, and when the water splashes everywhere in the shower area, it will cause water accumulation on the floor, so it will increase the risk of slipping. The separation of dry and wet areas avoids the phenomenon of water accumulation on the floor, which is the best choice for families with the elderly and children.

The above is for you to introduce the dry and wet separation methods and the benefits of dry and wet separation, if you want to know about the dry and wet separation of friends, you can refer to the introduction for you, I hope it can help you.