Why is there less and less carpentry now?

Carpentry is becoming less and less now, in fact, the most fundamental reason is that the work of carpentry is not easy to do, the work is monotonous and hard, and the working environment is poor. Today's young people are so keen on jobs that they can earn efficiently and work in a good working environment, so that there is no successor to carpentry. <>

First, a large number of woodworking equipment appears in the traditional carpentry human resources cost and time cost is high, it is difficult for many manufacturers are unable to withstand this pressure, it is this pressure, the rapid development of science and technology has led to the emergence of woodworking machinery and equipment to continuously improve the technical substitution of eliminating a lot of carpentry personnel, carpenters are some farmers their knowledge and cultural level.

Low, the only way to earn living expenses is their own labor, now the machine can efficiently make them a few days to make out of the raw materials and accessories, manufacturers are giving priority to their own interests, naturally accept the machine instead of manpower, so that carpentry in the machine appeared after a large number of eliminated, scared off willing to flow into the woodworking industry of newcomers, but also lack of newcomers, even the old carpenters also left. <>

Second, the ideology of the younger generation, young people are yearning to work in the office with air conditioning, and they can get a high salary. They are naturally reluctant to engage in this kind of hard work, this kind of work is very tiring at the same time, the salary is not high, the young generation of ideological concepts and then change they are willing to take greater risks to obtain high-profit jobs, rather than take risks rather than do a down-to-earth work, and 12 years of compulsory education.

The knowledge level of the new generation has been improved, and the carpenters were forced to do hard work because they were not educated, and they will definitely aspire to better jobs rather than return to their old lives. <>

Third, the work characteristics of carpentry carpentry work monotonous, hard work, poor working environment, although there are still many processes that can not be done by machines, so some carpentry work is also very high wages, but this requires carpenters to have superb technology.

However, new blood entering the industry is very rare, despite their skills can only be the entry technology, the workmanship is rough, if you want to practice your own carpentry skills, you have to invest a lot of time, which requires us to be strong willpower.

And the love of work, in the past, the driving force that urged carpenters to work hard was the pressure of life, but now that the standard of living has improved, without this pressure, it needs willpower and love to support.

The hard work of carpentry and the young people who enter the carpentry industry can not endure the hardships and loneliness, which scares off many people who are really willing to be carpenters, and people in the city are too impetuous, which causes carpentry to become less and less.

The number of carpentry jobs is decreasing. Unlike in the past, as long as the furniture cabinets were made at home, they were basically done by carpenters on site, but now they are slowly being replaced by custom furniture. Not only that, but even the carpenter said that there was less and less work on the ceiling.

Instead, there is a loop of wire, which is not only low-cost, but also works well. For jobs on site that really require carpentry, I don't know what a carpenter needs to do, except for wall modeling and some chores.

It can be seen that the owners have done some modeling for the top, but they have mostly used plaster lines. Even if a few finished plaster carvings were made on top, the cost was much cheaper than the ceiling. Of course, from the point of view of effect, it is also very good.

The whole ceiling has a strong sense of hierarchy.

Not only is the top here like a wall, but many of the shapes are made with plaster wire. Even the columns here are decorated with plaster lines. Unlike in the past, when we work with the columns, we first let the carpenter lay out the shapes, and then decorate them with various high-grade materials, such as marble, hard bags, etc.

Although the effect is good, the cost is not low. The modeling of these plaster lines looks very simple, but it is undeniable that the effect is not bad at all.

Later, the carpenter said that it was because of this that we had less and less physical work, so a family could not earn much. But in any case, decorating with plaster threads is a good thing for the owners. At least the cost of renovation was controlled.

In fact, no matter how you do the carpentry work, it is indeed a good practice to decorate the top with plaster thread, which is also a popular practice nowadays. For example, during the renovation of my own home, there was no ceiling molding. I walked straight through the plaster line, and the effect was no worse than the ceiling.

So, when you're renovating, you can try. It looks simple, but the effect is absolutely wordless.

First, there are few people who learn. Carpentry has higher technical requirements and a longer learning cycle, so many young people are more likely to choose others, and it is difficult for carpentry masters to teach, so there are fewer people to teach and learn. Second, there is less and less life.

With the advancement of technology, many families have begun to customize all kinds of furniture, which is cheap and good-looking, selective, and relatively shorter, so that owners can choose more customization in order to save trouble. Third, change careers: many decoration carpenters changed their thinking, went to a lot of furniture factories, changed from decoration carpentry to furniture carpentry, and started to do employee carpentry.

Machines have evolved, why are there carpenters everywhere, of course, because there is no need for them, so there are not so many carpenters anymore, this is a matter of course.

Because now many carpentry jobs can be made by machines, which is not only fast, but also efficient. So there is less and less carpentry.

Because the current craftsmanship is automatic and mechanized, carpenters with craftsmanship have slowly become obsolete.

Young people are reluctant to learn to do carpentry, why? The level of wages depends on supply and demand. You only think about supply, not demand.

If the cost of labor exceeds a certain point, the demand for carpentry decreases. I'm going to buy plastic furniture. This industry is particularly dirty and tired, so although there are high wages, but there are still not enough employees, and in recent years, major cities are exercising, the demand for professionals is increasing, this is not a type of work that can be produced in a short period of time, so the salary is too high, now go to learn this, if the sports wave in the big city has not ended, maybe the next big steel?

Now called carpentry if more accurate should be decoration carpentry, the real older generation of carpentry master skills want to pass on, apprenticeship is too long, as short as five or six years, more than eleven or twelve years, in the industry is also called small wood, such carpentry into the hand or has a characteristic market. This is the decoration carpenter in the home decoration environment is poor, every day is wearing work clothes or very torn clothes, because it is inevitable to get glue and dust on the clothes when working.

So you can only wear very poor clothes to work, it can be said that it is very faceless, but young people care about face very much, in addition to the long working hours of the wooden door, basically 10 hours a day, it can be said that it is very hard to do carpentry, which does not meet the expectations of young people for working hours. Now there are a lot of factories, the factories are full of young people, especially girls, the work is not hard, and they can get about 5,000 yuan per month, this kind of work is what young people like, and young people naturally choose easy jobs when they have a choice, and very few people choose to do carpentry. Learning carpentry is a long and painstaking technique.

Today's young people don't have to worry about food and clothing, and after a little suffering, they give up. Nowadays, some young people are so ambitious that carpentry is a very lowly job, a work that makes a lot of effort and sweats. It's all work at the bottom of society.

Carpentry work is not a job that can be done as soon as you stretch out your hand, without a foundation of several years, without a kind of tenacity, you can't do carpentry work well. It is understandable that young people are reluctant to do it, people go to higher places, and water flows to lower places. But as long as a working society needs it, someone has to do it.

The people who do it can't let go, and no one learns later, so the problem comes out.

The carpenter's income is too low, with the progress of society, there are many things that are not made of wood, such as the chairs and benches, sofas and beds, windows, etc. at home in the past, most of them are made of wood, and now many of these things do not use wood, which also causes the application surface to narrow, and the corresponding carpenter's work is less, and the income is reduced. At present, the status of skilled workers is not as high as that of white-collar workers, and like carpenters, bricklayers, electricians, etc., the working environment is poor, they have to endure hardships and hardships, and the wages are not high, so there is no successor.

Carpentry is a skill, both of which are a skill, as one of the three traditional Chinese elements (carpentry, timber, carpentry), which has been widely spread for many, many years. But now the name of carpentry if more accurate should be interior decoration carpentry, really the skills of the older generation of carpentry masters want to pass on, the apprenticeship time is too long, as short as five or six years, more is eleven or twelve years, in the field is also called small wood, this kind of carpentry into the hand or has the characteristics of the sales market. So if you don't talk about small wood today, let's talk about interior decoration carpentry that young people don't want to learn, why is this?

First of all, this is also the interior decoration carpenter in the home decoration environment is poor, every day is wearing work clothes or very torn clothes and pants, because the work can not avoid glue and dust on the clothes, so it can only be worn very poor clothes and pants to work, it can be said that it is very embarrassing, and young people are very concerned about the face, in addition to the solid wood door working hours are long, basically 10 hours a day, it can be said that doing carpentry is very hard, which does not meet the expectations of young people for running time.

The main thing is that it is such a thankless and hard work, the salary is not very high, and there is no benefit and its security, it is possible that you will not work tomorrow if you work today, and this kind of carpentry is of course not willing to learn at a young age. In addition, there are a lot of factories now, the factories are full of young people, especially girls, and the work is not hard, and you can get less than 5,000 yuan per month, this kind of work is considered to be liked by young people.

There are also many carpentry masters, all of whom propose that young people do not need to learn this, because there is no prospect for development in learning this, only to ensure that they have something to eat, and it is very difficult to even support their familiesFor young people, parents are looking forward to going out and learning more and having practical experience, so that they can be productive!

First of all, they are too tired, and secondly, they feel that if they can't learn, they will be very dirty, not decent at all and can't earn much money, and they are often outside and can't go home, so they don't want to learn carpentry.

I think on the one hand, it's because he's too tired, and on the other hand, because the job is not very decent, so more and more young people don't want to do it.

It was really tiring, because the carpenter required constant concentration, and the hands had to cut the wood, which was unbearable.

Carpentry is mainly to make some furniture, such as wardrobes, cabinets, beds, desks, wooden kangs; The development prospects of this job are very good, very profitable, as long as you are very good at learning arts, there are many places that need it, and you don't have to worry about not having a job, not worrying about not earning money.

Carpentry is mainly used to decorate houses, make wooden furniture, and make wooden handicrafts. The future of this job is not bad, and the pay is okay.

Carpentry is mainly the use of wood to make corresponding items. Although this work is not so much in demand in today's society, it still has a good future for development.

The prospects are good and will not be eliminated

Carpentry is divided into construction carpentry and interior decoration carpentry. The former is to build a building formwork, the technical content is not high, at present about forty or fifty as the main force, the average young person can not do it. The latter is easier to get started with the advancement of mechanization.

There is also a kind of carpentry in a furniture factory, such as antique furniture in the Ming and Qing dynasties, which needs to be accumulated in order to be independent. When it comes to prospects, as long as you have a flexible mind and are diligent in your hands and feet, there is no problem in supporting your family. If you can work independently and manage it properly, you can't get worse.

Qualifications for positions in the woodworking industry.

In fact, it is very low-end, this is due to the variety of carpentry, and it is possible to start from the lowest-end furniture factory.

Overall, carpentry skills are reproducible skills and not high-tech that requires a lot of ingenuity. Take the mortise and tenon structure.

In modern society. This structure is time-consuming and labor-intensive, which requires a lot of manual work experience, and it is difficult to achieve without three or five years of basic skills.

For training institutions, most of the vocational skills are in the nature of playing tickets, and it is difficult to start from this aspect. And now, it belongs to mechanization, mass production.

For salary, you can check the comparative analysis of recruitment**. At present, the average price of the average carpentry master in China is about 8,000.

For the career development of carpentry, the basic skills that can be reused, and the skills that can be transferred to other fields, I think there is only the same way of thinking about carpentry work.