How to cut long jeans into shorts to look good

I've cut two of them myself.

One loose and one tight.

Try to cut it as short as possible for a better effect.

Cut a small opening with scissors and tear it by hand.

The feeling of raw edges will be better.

It is also possible to tear a little vertically.

Feel free to pin it with a paper clip.

It's beautiful. The premise is to keep it as short as possible.

Because originally according to the type of trousers.

Cutting it into 8 or 5 points will be weird.

It's a hassle to lock the hem yourself.

So make use of some pins

Ropes, straps, and the like are DIY.

If you're interested, you can draw your own with acrylic.

Are you male or female?

Want to make 5-point pants or super shorts? If the legs are not long and thin, it is not recommended that you cut them into ultra-short pants, and you will be handsome if you do 5-point pants. This is suitable for boys to wear.

Make 5-point pants: first look at the bottom of the jeans 1/3 cut off, then put it in the washing machine, whether it is dirty or not, wash it for a period and see that there is messy hair underneath, and it is cool to wear it after drying.

** of 5 points pants.

The trousers are on the fat side, and the shorts are tight. Therefore, no matter how you cut it, the effect of wearing it is not as good as buying it. Unless you make it thinner.

Let's make it a flange... and can hide the thread... It's trending again this year

It doesn't look good at all, unless it's tight, and it always looks too fat when it comes down to the knees, and I'm talking about men.

How do you cut jeans that are too long to look good?

Jeans are shortened and lengthened, and the best way to look is to add a waist and lace edges.

1. Add a waist, you can add a waist to the denim shorts, find the old jeans that are no longer needed with the same color, cut the required part according to the size, and add about an inch of waist to the waist of the jeans that are too short, so that the original too short jeans will become longer.

2. Add lace edge, lace is often a decorative effect, because it looks like a lace, how to remedy the shorts that denim shorts are too short, you can use the method of lace edge to lengthen, and the method of lace to lengthen jeans is much better than using other fabrics.

Jeans introduced

Jeans, also known as "sturdy pants", use detergents containing high formaldehyde content during the dyeing and bleaching process. Jeans: Pants that are usually made of twill or cheesecloth for work or sports; Skinny leg leggings of any texture. In jeans, there is a constant flow of new products, washed jeans, patched jeans, raw-edged jeans and a wide variety of denim tops.

It can be found everywhere in markets and on the streets. Denim generally has a firm, rugged and energetic feel, suitable for both work and leisure. Jeans can be described as a star that never withers all year round, and is listed as the "first versatile clothing".

There are also more and more fabrics and colors of jeans.

The above content reference: Encyclopedia - Jeans.

The jeans are long, but you don't want to cut them, you can use the following methods:

1. Use a tape measure to mark the excess area, and then sew the excess trouser cuff into the outside of the pants.

2. Pull up the jeans, and the side of the jeans can be pulled up a little bigger, and then pull a few more laps to expose the whole shoe.

3. Modify the outside of the jeans, remove the line on the outside of the jeans, so that the sides of the jeans are narrowed and piled up at the ankles.

Why are jeans long, it is not recommended to cut them:

1. The sewing process of jeans is different from that of general woven pants, which is not a pry edge or a flat car pressing line, but a special type of car called a chain car. After cutting it off, you can only use the hem of the flat car, which loses the characteristics of jeans.

2. Jeans are usually washed, sewn and then washed in the production process, and then all the sewing thread positions will have different washing effects of washing and decoloration, if you cut off these washing effects, it will also reduce the characteristics of jeans. Shops and homes will also not have denim washing equipment and capacity.

The hems of jeans are available in the following types:

1. The neat and generous flat-edged pants are the most common classic jeans. Such straight-leg jeans, without any superfluous design embellishments, appear more clean and neat, and have a refreshing and handsome sense of sight.

2. The trouser hem with tassel design has its own fashion attributes, and it is a kind of item that is deeply loved by fashionable people. The cuffs of this tassel are full of smart and flowing beauty. Of course, different tassels also represent different styles.

3. There are certain similarities between raw trousers and tassel trousers, but the raw trousers will be more daily, with a casual and comfortable sense of comfort. Not as exaggerated as the fringed cuffs, it is an easier style to control and suitable for people with young personalities.

4. The cuffed trousers can create the effect of cropped pants, which is a neat and tall trouser shape. Different body shapes can be perfectly controlled.

5. Slit jeans are a particularly tall pants type. This kind of slit pants has a feeling of wind on the soles of the feet, whether it is a front slit or a side slit, it can form an inverted V-shaped effect, slightly exposing the skin, especially tall and thin.

Mark the position, choose to crop, and after cutting, you can choose to tie up the edges. You can also choose to brush by the river, which is also very beautiful.

Nowadays, it is very fashionable to cut off the middle section and look like installment jeans, with half at the top and half at the bottom.

You can cut the bottom of the pants a little shorter, but you need to use a sewing machine to sew the whole bottom of the pants so that there are no lines falling off.

Summary. 1. Spread the pants that need to be trimmed on the ground first.

2. Fold the two trouser legs in half and cut off the excess.

3. Lock the leg inward, this step is to prevent the ankle from being too thick.

4. Fold the bottom about 2cm inside. Because it is a fabric with relatively large elasticity, choose zigzag stitches.

5. The needle distance is adjusted to be between 2-3cm.

6. Lock the hem of the pants around the edge, and the pants have been shortened to the length of the fit.

7. Another way is to remove the waist, find some fabrics of the same color to make the waist into a hidden waist type, and widen it, try it. Use the same (waist change) cloth at the cuff of the pants to make some embellishments or decorations to play an overall echo.

8. There is another solution: if the pants are fat enough, you can extend the crotch car to the small crotch position a few points down to reach the depth of the extended crotch.

Jeans should be short how to get long.

1. Spread the pants that need to be trimmed on the ground first. 2. Fold the two trouser legs in half and cut off the excess. 3. Lock the leg inward, this step is to prevent the ankle from being too thick.

4. Fold the bottom about 2cm inside. Because it is a fabric with relatively large elasticity, choose zigzag stitches. 5. The needle distance is adjusted to be between 2-3cm.

6. Lock the hem of the pants around the edge, and the pants have been shortened to the length of the fit. 7. Another way is to remove the waist, find some fabrics of the same color to make the waist into a hidden waist type, and widen it, try it. Use the same (waist change) cloth at the cuff of the pants to make some embellishments or decorations to play an overall echo.

8. There is another solution: if the pants are fat enough, you can extend the crotch car to the small crotch position a few points down to reach the depth of the extended crotch.

Kiss, I hope it can help you!

First, the method of cutting jeans short:

First of all, jeans must be washed once before changing to prevent them from shrinking and becoming shorter after the change; The length of the pants refers to the pants that are more suitable for you, and you would rather be long than short, because the jeans will become a little fatter after wearing, and the length of the pants will also become a little shorter.

1. Fold the cuff of the pants from the front of the pants;

2. Turn the water edge back again;

3. Tidy up the trouser cuff, measure the length of the trousers from the position on the map with a ruler, and adjust the hem of the trousers if the length is not suitable;

4. Fix the edge of the pants with large stitches;

5. The sewing machine is along the inside of the water mill, and I just need to sew a circle at the position where I draw the red line;

6. Iron the front of the pants;

7. Cut off the excess part inside, wrap the edge, and fix the white thread part of the fabric with a needle, so that it cannot be seen from the front;

8. This is the effect of improvement.

Second, the way to modify jeans:

1. Find a length that suits you. Make sure how much you want to make your pants shorter so you know how long to sew the frills. Put your pants on and use a tape measure to measure how much fabric you need to cut. In general, the hem should be about a centimeter off the ground, but it all depends on your personal preference.

2. Measure the size. Take off your pants and spread them out on a smooth surface. Use a tape measure to measure the distance from the existing frills to the bottom of the hem (usually about centimeters, but depending on the trouser style).

3. Secure your pants with pins. Pin a few pins to the hem you want to modify, and you'll sew the hem in that area. Then, pin the second row of pins above the new seam edge.

The distance between the 2 rows of pins and the leg and the original frills is the same (usually centimeters). During the modification process, the original frills will be retained, so the second row of pins must slightly reduce the length added to the original frills.

Have you ever had such a trouble in your life: every time you buy new pants, when the waist is right, the trouser legs are always a little longer, which affects the actual wearing effect. At this time, some friends will choose to manually change the length of the pants, and there are many ways to shrink the length of the pants, among which the shrinkage method that retains the original bottom edge of the pants is undoubtedly the best.

In the case of jeans, we first use a marker to draw the leg we want to cut and cut it.

Leave a seam allowance for joining edges. The width is equal to the width of the hem of the finished product (we measure the distance from the lower edge to the "natural" line + cm). My sample is centimeters. Then cut off the other excess amounts.

We overlap the hems of the cropped trousers with the legs, we fix them with bead needles, and then sew them together.

Place the line centimeters away from the hem line. For clarity, I put the thread in white.

1. The first step is to lay the bottom of the jeans flat, just above the seam and at the hem fold, as shown in the figure below, if you see the ** below, the hem of the pants is about centimeter high, we arrange the pins from the original, measure the height of the shortening yourself, and then place a new row of stitches.

2. Step 2: Fold the bottom of the pants to the top row of stitches, and then fix the folded trousers with bead needles.

3. Step 3: Stitch the end of the trouser leg.

4. Step 4: Cut off the excess fabric.

5. Step 5: Then press Flatten. Use steam to iron flat.

6. If you sew by hand, you can put it flat on the inside without cutting the fabric, and then sew it along the side seam by hand.

If the jeans need to be cut short, if you want to cut them straight, first start from the trousers and slowly fold them in half, so that even if the left and right trousers have long and short feet, you are not afraid, and then use large scissors to solve it, if there is an electric scissor, it is better to cut it more neatly.

If you want to cut the pants short and let the edges fall apart, you can rub the edges of your feet vigorously after cutting, and the effect of raw edges will be produced. Generally speaking, it will be in stock after washing it a few times.

If you want to keep your jeans short, you have to follow a certain proportion, otherwise you will cut them casually and it will affect the appearance. We have to go through our own conditions. Come and go and calculate its length correctly, and the effect of wearing it out is the past to see.

This design concept has to be based on. An aesthetic concept of its own.

Jeans are young and short, so first measure the length of your pants, and then you need two sizes for yourself, and then the length of the pants is the length of the pants inside the fan, and then the excess part is subtracted, the pants are braided inside, and then the pants are sewn up, so that the jeans are cut short.

You can try on your jeans yourself, then roll up the long part and let a professional tailor cut it short for you, not by yourself.

1. Take off the pants and put them on the plane, disassemble the original pants edge, cut 1 4 along the fold, and tear the rest carefully by hand. Tearing by hand can create a more natural damage pattern, but be careful to control the direction of tearing.

2. Treat the other leg of the pants in the same way, and if you find it difficult to tear it, use scissors to cut a little more notch.

3. Then use coarse sandpaper to grind the fabric into that damaged plush shape at the end of the trouser tube.

4. Loosen the fibers that will be ground up by the sandpaper. Keep polishing, pulling loose. Until these jeans achieve the desired raw edge.

Jeans are cut short before according to their length, and then. Then step the cow over the short part of the front. Fold a centimeter or two slightly. Then sew it with a needle and you're good to go.

If the jeans are long, you can go to the tailor shop and ask the tailor to cut them for you. If you want to wear something with personality, you can also cut it yourself. Because the bottom of the jeans is very strong, it will not fall off.

Cut out different shapes according to your preferred length. Then use a needle to pick out the cloth of jeans, which is also a very fashionable way to wear.

First, lay the bottom of the jeans flat, just above the seam and at the hem fold, fold the bottom of the pants to the top row of stitches, and then fix the folded trouser legs with bead pins. Sew the ends of the pant legs. Just blanch it again.