How to restore the factory settings of the Plier network set top box

Updated on technology 2024-06-30
4 answers
  1. Anonymous users2024-02-12

    If it is a network set-top box used by China Unicom users, the steps to restore factory settings are as follows:

    Step 1] Press the "Settings" button on the remote control of the set-top box to enter the settings page;

    Step 3] Move the cursor to "Advanced Settings" and click OK.

    Step 4] Enter 10010 in the pop-up password box and click OK.

    Step 5] Move the cursor to "Factory Reset Value" and click OK.

    Step 6] Enter 10010 or 6321 in the pop-up password box and click OK.

    Step 7] Click the OK button on the prompt "Whether to restore factory value" page and wait for the set-top box to restart automatically.

  2. Anonymous users2024-02-11

    The method is as follows: 1. Press the "Menu" button of the remote control of the set-top box;

    2. Then use the up and down buttons of the remote control, select "System Settings", and "Confirm" button to enter;

    3. In "System Settings", use the arrow keys to find "Factory Reset" and click "OK".

    4. A password box for entering the password will pop up, and the password will be entered correctly.

    5. A dialog box pops up again for the user to confirm whether to restore factory settings, and select "OK";

    6. Successfully restore the factory reset system.

  3. Anonymous users2024-02-10

    Generally, the factory recovery is in the setting, or there is a small hole in the box, and you need to use a needle to top it.

  4. Anonymous users2024-02-09

    Hello dear<>

    I'm glad for your question, how to upgrade the Prield network set-top boxP3The upgrade method is as follows:1、Manual search upgrade:The method of manual search for the Pliter TV network set-top box P3 upgrade is to unplug the signal line of the set-top box first,The TV will automatically search,But because there is no signal,The TV can not search for any channel。

    After that, reconnect the signal cable,Enter the TV menu,Use the ** device to conduct manual search,After the search is completed, the set-top box upgrade is completed,Return to normal operation。 2. Restore factory settings and upgrades: Restoring the factory settings of P3 set-top box of Purier TV network is also a method of upgrading and digging rough out of set-top boxes.

    The steps of this method are: first enter the settings interface, return to the factory settings, and use the manual search method to search. Channel 1 does not have any programs, and when you enter channel 2, you start to have programs and then add them in turn.

    That is, it is upgraded to famine attack. Both of these methods can make the Prier TV network set-top box successfully upgraded.

Related questions
9 answers2024-06-30

If it is a network set-top box used by China Unicom users, the steps to restore factory settings are as follows: >>>More

4 answers2024-06-30

The set-top box of the Saibo network can be reinstalled from the factory and the TV client software can be reinstalled >>>More

11 answers2024-06-30

Hello. After restoring the factory settings and turning on the phone again, the system will generally have a setting prompt, and you only need to follow the prompts to operate the general operation.

11 answers2024-06-30

There are a lot of coping tutorials on TV.com, so I suggest you check them out.

6 answers2024-06-30

The State Administration of Radio, Film and Television issued a ban this year, requiring that TV boxes in Zhejiang and Shanghai be prohibited from pre-installing unaudited **APP, and criticized Huashu and BesTV by name, two licensed companies, and demanded immediate rectification. Subsequently, Tmall Magic Box and other products involved acted quickly, saying that they had blocked the channel in the app store in accordance with the requirements. >>>More