Is a kitchen built in sink or countertop sink better?

The kitchen likes the built-in sink well, which is convenient for washing, but also practical, takes up less space, and is easy to clean, and the sink on the countertop takes up too much space, so it is inconvenient to wash things.

The sink in the kitchen is best made into a built-in, commonly known as an undercounter basin. The advantage is that the water on the countertop can be easily swept into the sink, if it is a countertop basin, the sealant will age after long-term water, and the residual stains are not easy to clean. The material of the sink is better than stainless steel.

The kitchen built-in sink is better or the sink of the countertop, I think the sink of the countertop is good, because it is not the sink in the washbasin cabinet is often filled with water, washing vegetables and dishes, if the sink is easy to fall down after a long time under the counter, no matter how good the built-in sink is, after all, it is also sticky, isn't it, if it is a sink on the countertop, then this weight is the cabinet will be used longer in the bear time.

Each has its own merits. The built-in sink is clean and easy to care for, but the disadvantage is that it is easy to fall off. The countertop sink is sturdy but prone to stains and watermarks.

1. Consideration from the perspective of cleaning: undercounter basin "countertop basin".

The sink of the undercounter basin is pressed under the countertop, and the water, rice grains, and vegetable leaves on the countertop can be easily wiped into the sink, which is easy to clean and stains are not easy to accumulate.

There are many sanitary dead corners of the basin on the countertop, it is not very convenient to take care of it in the later stage, the position of the contact between the sink side and the countertop is closed by glass glue, and the glass glue is easy to mold and turn black after a long time, plus the quality of the sink or the cabinet process, the water is easy to flow into the cabinet along the gap.

The built-in sink is easy to accumulate water, and the countertop sink is easy to fall off if it is not well installed.

Good built-in sink in the kitchen.

I think it's better to have a double sink in the kitchen. The difference is the size of the space, and the practicality will also be different.

At the stage of renovating the kitchen, some people don't know whether to choose a single or double sink in the kitchen. I think that compared to these two sinks, double sinks will be better to use.

Choosing a double slot, we can put the vegetables while washing the vegetables. If you choose a single sink, when you wash the vegetables in the sink, you can only put the washed vegetables on the stove, and then you have to take another basin for the dishes, which will take up a lot of space.

But if you choose a double slot, you can wash the vegetables in one slot and put the washed food in the other. And these washed dishes can also be filtered out in the sink, so when you want to eat while you want to chop vegetables, these dishes will not have a lot of water, and the kitchen stove will not look wet.

Choose two slots, one for things and one for cleaning. Some people don't wash the dishes immediately after eating, but put the bowl in the sink to soak for a while. In this case, if you are using a single slot, when you soak the bowl in the sink, the slot cannot be used to clean other things.

But if you choose a double slot, you can put the dishes and chopsticks you have eaten in one slot, and the other slot can be used to wash vegetables, wash rags, etc.

Differences:Capacity differences. There is a difference between the capacity of large single slots and double slots, the large single slot thinks that there is only one slot, in the case of enough space on the stove, you can choose a larger slot, such a slot can be placed under a larger slot.

For example, you can clean and dismantle the range hood in such a large single tank. If you're using a double tank, each tank is smaller, and you won't be able to clean the big stuff in such a tank.

It is better to use double grooves on the kitchen decoration countertop, double grooves will be more convenient, and you can also put the dishes and chopsticks in another groove, which is more convenient when cleaning, while the single groove is not so convenient when cleaning, and there is no place to place the dishes and chopsticks, compared to the choice of double grooves.

I think it's best to choose double slots for kitchen decoration countertops, because double slots are more convenient to use and are also very clean; A single sink is suitable for small kitchens and can save space, while double slots are suitable for large kitchens, and you can also choose according to your own habits.

I think that the kitchen decoration should use double sinks, which is more convenient, can reasonably standardize the daily life area, and also meets the needs of various washing, to a certain extent, it is more convenient, and can make reasonable use of space to ensure daily life.

With a single trough, double slot takes up a lot of space, and you can separate the dishwashing and water control. The usage rate of a single slot will be higher, and it is very convenient to use.

Embedded, the sink requires a higher quality, once there is a problem and needs to be replaced, it is very troublesome, the replacement of the countertop is more convenient than the embedded, you can weigh it yourself, give you two pictures to compare.

The most traditional installation method is also the most important installation method at present, the installation is simple and convenient, the texture of the sink is outstanding, especially suitable for the installation of medium and high-end sinks, and the overall effect is convex; The undercounter basin generally needs to be installed by the cabinet manufacturer and then sent to the customer's home, and it is difficult to replace it after installation; The advantage is that the countertop is easy to clean, because the edge of the sink is hidden under the countertop, so the corner of the sink is very simple, and there is a certain advantage in cost.

At present, it is not used much, mainly used in high-end thin-edged basins, and the requirements for the size of the countertop opening are very strict. But if it is done well, the effect after assembly is very good, which not only has the overall view of the sink but also facilitates the cleaning of the countertop. To sum up, the built-in requires a high quality sink, and it is very troublesome to replace it once there is a problem. The countertop can be easily replaced than built-in.

And after a long time of embedding, it is easy to fall off and not easy to repair.

Kitchen sinks are generally made of stainless steel, because stainless steel sinks have been popular for a long time, and there are more stainless steel sinks used in kitchens, this choice is not only because the metal texture of stainless steel is quite modern, but more importantly, stainless steel is easy to clean, the panel is thin and lightweight, and it also has the advantages of corrosion resistance, high temperature resistance, and humidity resistance.

Stainless steel sink.

Stainless steel sinks are divided into stretching and handmade, and the process of stretching sinks is much simpler than that of handmade sinks, so it is naturally much cheaper than handmade sinks. Therefore, the value of handmade pots is naturally higher, in terms of thickness alone, the thickness of handmade pots is generally thicker than that of stretch pots, except for thick panels. You can choose whether to stretch or hand according to your economic strength.

The kitchen sink should be decided according to the size of the kitchen space of the home. If the kitchen space is relatively large, and the cabinet counter area is larger, it is recommended to choose the kitchen sink double sink, although the double sink is more expensive, but the same installation space can be obtained more convenient to use, a sink can be used to brush the pot, wash rags and other dirty work, the other is used to wash dishes, wash vegetables, wash fruits. Wash things in one, drain the other and so on.

If the cabinet area is small and the family population is large, it is best to choose to use a large single slot, a single slot is cheaper, and in the same installation space, a single slot can obtain a larger use of space. That is to say, with the same large hole in the countertop, the use of space for a single tank basin is larger than that of a double tank. In addition, there is only one sewer in a single tank, and the sewer line is simpler than that in a double tank.

There is also a thickness that should not be too thin, nor too thick, too thin will reduce the load-bearing capacity of the sink, and the hardness will be higher if it is too thick, and there will be a risk of damaging the drinking utensils and tableware. The optimal thickness should be between.

The sound-absorbing pad must be selected as an environmentally friendly sound-absorbing pad, and the thickness of the sound-absorbing pad also needs to have certain requirements, which is easy to fall off after a long time if it is too thick, and it is also difficult to install. It's best to be in between.

Double slots: ** will be expensive, easy to install, easy to use, two slots can be classified and washed, a lot of worry; There are two sewers in the double tank, so the drainage management will be more complicated, so the chance of failure will be greater than that of the single tank. Generally, the double tank is composed of two small single tanks, so if you want to wash a large pot and basin, there may not be enough space.

To sum up, there is no very certain answer to choose a single slot or a double sink, all choices should be based on their own kitchen habits, if the countertop space is small, choose a large single sink, on the contrary, choose a double sink.

Based on my personal experience of many years of use, I chose it. Undercounter basin, single slot.

I now use the double groove at home, and I found that the right groove is chicken ribs.

Choose a 63 cm single slot, because then you can put your pot in it and you won't take up a lot of space.

Kitchen sink, which should I choose? Use a single sink for a small kitchen area and a double sink for a large area.

Because embedded systems are dedicated to specific tasks, design engineers can optimize them to reduce the size and cost of their products and improve reliability and performance. Some embedded systems are mass-produced and benefit from economies of scale. Unlike general-purpose computer systems, embedded systems use so-called SoCs for maximum hardware integration.

Specifically, the CPU and peripherals are packaged on the same chip, also known as SoC, or system-on-chip. Embedded systems are small for only one task and can be optimized and reduced in size, and embedded systems are embedded control boards where control programs are stored in a ROM. Now smart homes, electronic medical equipment, and the Internet of Things are all used in embedded systems.

<> embedded hardware engineer, mainly mastering the circuit knowledge of computing motherboards based on CPU design. Therefore, the knowledge of modular, digital and EDA is the basic skill of this kind of engineer! In addition, familiarity with common communication protocols and buses, such as CAN, SPI, I2C, and definition from a system perspective:

An embedded system is a computer system that designs hardware and software to complete complex functions and tightly couples them together. The term embedded reflects the fact that these systems are usually an integral part of a larger system, and are called embedded. Take Android apps, for example, some say it's embedded development.

But from my personal 10 years of experience in embedded development. The understanding of embedded systems is that they do not run on a PC rack.

(the program code has been prepared in advance according to the format of the memory storage), so the boot is very fast. After the non-embedded system is turned on, it is necessary to execute a complex boot program to compose the system programs one by one from the storage medium, serial port, network port and other parts. However, the embedded operating system is quite different from ordinary PC equipment in terms of speed, power consumption, storage, etc., because the embedded operating system is basically used in small and medium-sized devices.

So this type of operating system is not possible.

Because I didn't think about it so much when I bought it at the time, I only found out how good the built-in sink was after I installed it, but I couldn't buy it anymore and couldn't replace it.

Because such a sink is relatively expensive, and the requirements for the internal space are relatively large, and then the construction is also more difficult.

Because this kind of built-in sink is very difficult to install, and there are many disadvantages, so now people have eliminated it.

There are not many embedded ones sold on the market, and people seem to use non-embedded sinks by default for decoration, plus the installation of built-in sinks is more complicated and prone to problems, so they are all embedded in Anfei?

Because the embedded process is more complex, the decoration master will generally choose a more relaxed method, and the choice of embedded needs to add money.

When it comes to buying sinks, some families are still stuck in single and double sinks, on the table or on the table, but they find that these are outdated and will be accompanied by problems such as loud water droplets and condensation. As a senior home blogger, here are some suggestions for the majority of families, when choosing a sink, there are several best not to choose, to avoid stepping on the pit.

Which sinks to be protected from lightning.

The first type is the small double slot, which is the most common double slot. Generally speaking, in a limited space, this should be a large single slot, but in order to meet the needs of classification and partitioning, it is divided into two small double slots, which looks more crowded. The disadvantage of this small double tank is that the space is too small, but any large-capacity pot that needs to be cleaned cannot be placed, and the water is easy to splash outside during the cleaning process.

This small double trough can only be used to wash a limited number of vegetables, fruits, and dishes. Compared with this small double slot, it is not as practical as the large single slot.

The second is not to choose 201 stainless steel sink, but to choose SUS304 stainless steel, after all, this is a serious stainless steel, with corrosion resistance. Some people see 304 and start, but they don't know that the one they bought back may be the DUS stainless steel sink, which is an alloy material of manganese, sulfur, phosphorus and other elements, with poor corrosion resistance and easy rust. The most critical thing is the presence of manganese, which is harmful to human health.

The third is not to choose a mirrored stainless steel sink. Many families choose this kind of sink because it looks bright and beautiful at first, but after a long time, there will be various scratches on it, which makes people look a little disgusted. In contrast, brushed stainless steel is more durable.

If there is dirt or oil stains, wipe them lightly and it will be gone.

The fourth type is the black sink. Black is said to be dirt-resistant, but in fact, it is not dirt-resistant at all in the kitchen, but any water stain can be seen clearly. Therefore, if there is a black sink in the home, it must be cleaned regularly, which is time-consuming and labor-intensive.

The fifth is to try to avoid sinks with a depth of less than 18 cm, otherwise the water will easily splash out when washing things. Of course, don't choose a sink that is too deep, otherwise you will have to bend over at a large angle when washing vegetables, and people will be very struggling. The best sink depth option is around 20-25 cm.

The sixth is that the thickness should not be less than 1 mm. Here we need to popularize science, the thickness of the sink is at the bottom of the water outlet, not the outer edge, and the outer edge of some sinks will be a few millimeters thick. The thicker the sink, the higher the quality, the longer the service life and the need not to replace it frequently.

The seventh is not to choose the sink in the middle, but to choose the back or one side of the sink, which can ensure the storage space of the cabinet.

The eighth is not to choose chicken rib configurations, such as knife holders, chopstick baskets, this kind of thing is placed next to the sink, it is easy to be splashed with water, easy to breed bacteria or mold, which is not good for human health. In particular, many families like to use wooden chopsticks, once in a humid environment, it is the most likely to mold.