The faucet is rusty and can t be removed, is there any good way?

Find the department in charge of water supply to help, and it is estimated that the main valve may not be closed tightly. If you close the main valve tightly, remove the faucet and the water valve from your own and replace them. If you can't close the main valve tightly, let the water supply department replace the main valve first, and tell them that the water pipe at home is broken and needs to be repaired.

First of all, find a professional master, check it, and if it is indeed as you described, just change the faucet. The faucet is dripping, and the water valve gasket is grinding a little bit, so it's good to save the faucet valve! Turn off the big valve and get a new one!

Put all the faucets of your downstairs residents open, reduce the pressure on your home, and replace the main valve of your house first to solve the main problem. The faucet is not rusty, it is the old-fashioned lead oil and hemp as the sealing material is too tight, with a slight fire burning, with a pipe wrench can almost be removed.

<> if you have strong hands-on ability, there are many ways, but if your hands-on ability is not strong enough, just buy a new one and replace it! Note that if the rust dies, the wire may break in the joint. If it is broken, it is troublesome, and you can only replace the faucet with a new faucet after shaving it with a special tool.

If the faucet is dripping, close the main valve before disassembling the faucet spool and replace it with a set of cores. Fundamentally, it is to solve the problem of merciless water and fire, spend money to hire professionals to repair it, there is nothing that can't be done, close your own home in advance, can't close it, close the pipe well, close the pipeline well, close the equipment room, and then the main pipe gate valve to hit a ** to the water company, spend some money, and you must engage in the store! If you are afraid of spending money, you can only endure the long flow.

At first glance, you are a person who rarely does it yourself. It's a minor issue! You can ask someone from the property to help replace the new faucet, of course, for a fee.

You can also buy a pipe wrench yourself, first close the main valve of the water, and then replace it yourself, it's very easy! Find water supply maintenance, change valves and faucets, and replace part of the pipes if necessary to prevent water leakage accidents! Wrenches may not work, you can borrow a large pipe wrench to remove the existing corroded pipe.

If the pipe can't be removed, find the water meter, start disconnecting from the outlet meter, and replace it with a PPR pipe.

Faucets are easy to rust after a long time, and I use this simple and practical method to remove rust.

First of all, you have to take some white vinegar, because the substance in the white vinegar can dissolve the rust of the faucet or something, and then find a plastic bag, pour some white vinegar and water in the plastic bag, and then tie the plastic bag to the faucet, about a night or so.

Rust removers can be sprayed. After spraying, let it sit for a period of time, if the rust is severe, it should be re-sprayed, and then disassembled with a wrench.

I think that in such a situation, you should find a professional repairman to replace the faucet, which is more convenient.

The first thing to do is to turn off the main gate and disassemble it with a hose clamp. If you really can't get it out yourself, find a worker master to do it.

useRust removerOr acidic solution, boil a pot of boiling water and pour it on the joints of the water pipe, wrap it around the new faucet thread with a raw meal bagClockwiseThe direction of the winding.

1. If the faucet has a rusty problem, it will not be screwed. In this case, close the main valve first, and then twist it left and then right. However, if it is difficult to loosen it with great force, you need to remove the rust first, you can use a rust remover or acidic solution, spray it on the rusty area, wait a little, and then rotate it in a counterclockwise direction with the help of a movable wrench, and you may be able to unscrew the faucet.

2. Next, disassemble it, or you can use engine oil or vinegar to boil a pot of boiling water and pour it on the joint of the water pipe, and then try to twist the faucet.

3. If you need to replace a new faucet, you can use a raw meal bag, wrap it on the new faucet thread with a raw meal bag, pay attention to the direction of winding, and wrap it in a clockwise direction, and finally install the water inlet nozzle.

The faucet is well chosen, and it will not rust for many years, and it is necessary to consider what material it is made of, some are chrome-plated, with a metallic luster, and are not prone to corrosion. In addition, you can also choose lacquer, the surface is very smooth, the color is also very strong, like the texture of a piano, it will look very high-end. Some are orb technology, which is modified into red or black, and finally sprayed with oil, which is relatively retro and can bring better decorative effects.

When choosing, you should also look at what brand it is, the quality of the big brand is very good, there is a certain warranty period, and the after-sales service is also in place.

Summary. 1. Use a hammer to gently knock on the junction of the faucet and the water pipe, and knock it all around, repeat it several times, the main function is to loosen the bite between the faucet and the water pipe.

2. Remove all the raw material belts wrapped around the junction of the faucet and the water pipe, and spray rust remover. Rust remover can be used as a loose rust lubricant for automobiles, and this rust remover is also easy to buy.

3. After the rust removal is carried out for a period of time, twist the faucet with a wrench or water pipe wrench to remove it.

It should be noted that although the rust has been removed, the faucet is still relatively difficult to twist and requires a lot of effort. Of course, this also has to do with the situation when the faucet was installed in the first place - if it was stuck tightly when it was first installed, it will take a lot of effort to remove it now. If you unscrew the faucet, it will be more troublesome to deal with, it is recommended to consider asking someone to replace the faucet.

How to get out of a rusty faucet.

Hello, I have seen your question and am sorting out the answer, please wait a while

1. Use a hammer to gently knock on the junction of the faucet and the water pipe, and knock it all around, repeat it several times, the main function is to loosen the bite between the faucet and the water pipe. 2. Remove all the raw material belts wrapped around the junction of the faucet and the water pipe, and spray rust remover. Rust remover can be used as a loose rust lubricant for automobiles, and this rust remover is also easy to buy.

3. After the rust removal is carried out for a period of time, twist the faucet with a wrench or water pipe wrench to remove it. It should be noted that although the rust has been removed, the faucet is still relatively difficult to twist and requires a lot of effort. Of course, this also has to do with the situation when the faucet was installed in the first place - if it was stuck tightly when it was first installed, it will take a lot of effort to remove it now.

If you unscrew the faucet, it will be more troublesome to deal with, it is recommended to consider asking someone to replace the faucet.

First, put a few drops of kerosene, engine oil, and other lubricating oils on the rusty faucet, and then try twisting it left and right; Or boil a pot of boiling water, pour it on the outer thread of the rusty faucet, and use the effect of thermal expansion and cold contraction to unscrew the faucet; If none of the above methods work, you can only use professional tools to sawn off the faucet and threads, and install a new faucet.

How to maintain the faucet:

1. Ask a professional to install it.

Install the faucet first, and it's best to have a professional do it. Before installation, the miscellaneous materials in the pipeline should be cleaned, and during installation, be careful not to collide the faucet with hard objects, and remove the residual glue on the surface of the faucet in time, otherwise it will affect the gloss of the surface plating.

2. Do not turn off the faucet too hard.

Some friends are worried that the faucet is not closed tightly, so they will deliberately tighten the faucet, in fact, this practice is not advisable, because this will not only not prevent water leakage, but also cause damage to the sealing valve, resulting in the faucet head is not strict.

3. Good habits keep the faucet as good as new.

When using the faucet, rinse it with clean water and dry it with a towel in time after use, which not only keeps the surface of the faucet clean, but also makes the faucet last longer.

4. Clean up the surface dirt in time.

If the dirt of the faucet is thick and cannot be washed off with clean water, you can use a damp cloth dipped in a little toothpaste to wipe it, and be careful not to use the handle of the faucet as a handrail to support it.

If the household faucet has been used for too long, the surface will be mottled and rusted, the water leakage will not stop, and even the faucet screws will not be rusted and screwed. Xiudada warmly reminds that if the faucet is too old to open, do not force it to be unscrewed. Here's how to unscrew the rusty screws of an old-fashioned faucet.

1. Replace and repair rusty dead faucets.

1. Unscrew the faucet left and right to see if it can be twisted.

2. Close the main valve first, and try to drop oil at the interface a few more times.

3. If the rust is dead, see the joints of the water pipe and reinstall the faucet.

4. Turn off the main switch. After dismantling, take out the copper core valve, find a rubber ring of the same size and install it.

5. Find a big wrench of 300 or 450. It is better to have two 450's, and you can disassemble them from the hexagonal point where they are connected.

Second, the faucet screw rust repair and replacement steps.

1. Prepare the tools to repair the faucet first, such as preparing a new faucet and wrench.

2. Disassemble the rusty faucet with a wrench.

If the faucet is rusty and can't be unscrewed, you can buy a bottle of rust inhibitor and spray it, and you can unscrew it in a while, or you can get some engine oil.

Settle the water in the home.

The white faucet is rusty and can't be screwed down, and the materials that need to be prepared include: white vinegar and plastic dao

Bags. First, first of all, the rusty water faucet should be prepared.

2. After preparation, pour an appropriate amount of white vinegar into a plastic bag, and the acetic acid in the white vinegar can soften the rust.

3. Use a plastic bag filled with white vinegar to put it on the head of the water dragon, and the white vinegar needs to be left without the faucet.

Fourth, then tie the plastic bag to the faucet and let it sit overnight.

5. The next day, after the white vinegar dissolves the rust, unscrewing the faucet may solve the problem that the faucet at home cannot be screwed off.

If the faucet at home is rusty and can't be unscrewed, you can spray some rust remover on the rusty part and wait for a while to screw it, or use a hammer to knock it while twisting it (vibration will cause the rust to fall off).

Heat it up, and the thermal expansion and contraction may be fine.

It is recommended to go directly to the local community du property maintenance in Bai, or.

Those who go to the local community service outlets DAO, or directly look for water sellers.

The shop of the faucet (generally belongs to the pipe installation, and the labor fee is charged). Turn off the outside water switch to replace the faucet, and in winter, you need to get the consent of the local community property to close the faucet (to avoid the water pipe bursting).

Summary. 1. Directly bake the place where the faucet thread is twisted, and the rusty faucet can be twisted;

2. Buy a bottle of loosening agent and spray it directly on the faucet or use kerosene, drop a few drops to let penetrate for a few hours, and then use a wrench to twist it;

3. Percussion method, you can find a hammer and then use the hammer to slowly knock;

4. For the faucet that cannot be screwed by rust, it can be cut off with a grinder, and then replaced with new pipe fittings and faucets.

What should I do if the faucet is rusty and can't be unscrewed?

1. Directly bake the place where the faucet thread is twisted, and the rusty faucet can be twisted; 2. Buy a bottle of loosening agent and spray it directly on the faucet or use kerosene, drop a few drops to let penetrate for a few hours, and then use a wrench to twist it; 3. Percussion method, you can find a hammer and then use the hammer to slowly knock; 4. For the faucet that cannot be screwed by rust, it can be cut off with a grinder, and then replaced with new pipe fittings and faucets.

Thanks! I will look for you if necessary.

Okay.

1. Use a wrench to vibrate gently to see if you can loosen the joint of the water pipe, and then try to twist it with the help of a wrench.

2. If there are many rust traces on the water pipe, you can remove it first. With the help of lubricants, for example, you can use cooking oil from your home or kerosene. Apply a few drops to the threaded mouth of the faucet and wait a few minutes.

Because the oil can play a certain role in lubrication, then you can try again to see if you can unscrew it.

3. Boil a pot of boiling water and pour it on the water pipe interface, this method uses the principle of thermal expansion and cold contraction. Then with the help of lubricating oil, use a wrench to twist it again.

4. There is a kind of loosening agent on the market, which is sold on the Internet or in hardware stores, it is specially designed to remove rust, which can be sprayed on the rusty place of the valve, wait for a few minutes, try again, repeat several times, maybe it will be opened.

5. If you really can't open it, you can only saw off the water pipe and replace it with a new one.

The so-called stainless steel is not rust-free, but rust-resistant than iron, which includes nickel, chromium, etc., and it is very normal to form galvanic batteries and produce rust in the presence of water. This layer of rust covers the surface of the faucet and makes it tarnish, and it is very unsightly on the outside.

So, what to do if the faucet is rusty?

Take a potato, peel off the potato skin with a knife, and then use the side of the meat to repeatedly wipe the surface of the stainless steel faucet, you will find dirt and scale, and the stains and rust on the faucet will be slowly washed off. Then clean the faucet with clean water, and you can see the bright and mirror-like water head.

According to the principle, wiping a stainless steel faucet or stove with a white radish peel can also have the same decontamination effect. It can be seen that vegetables in life can play a good function.