How do you change a broken toilet flush faucet?

Toilet flush faucet broken repair method:

1. Close the main water inlet gate of your home first.

2. Turn on the lowest faucet and put water in the memory.

3. Use a hammer to loosen the live connection under the copper ball valve.

4. Use a suitable pipe wrench to loosen the live Luomu, and this water pipe will be divided into two, and the valve can be removed.

5. Wrap it with a sponge or cloth in the place of the water inlet pipe to ensure that the water inlet is normal, and the final juice bottle is filled with water and put it into the water tank, which can also save water and reduce the water inlet time.

6. Go buy a valve and a roll of raw meal tape.

That's it, remove the old one, replace it with a new one, and remember to wrap it in raw material tape.

Close the main valve of the water pipe, and then remove the old faucet and replace it with a new one. Finally, open the main water valve.

How do you change the toilet flushing faucet when it is broken?

I think this one is very simple.

Step 1: Close the main valve in front of your toilet faucet.

Step 2: Remove the faucet that has been damaged.

Step 3: Buy a new one according to this model and replace it with it.

The fourth step is to talk about the opening of the main valve in front.

Through the above four steps, this bad faucet is completely replaced.

If I can help you, please give it, thank you.

First of all, turn off the main water gate of the house. The purpose is to ensure that there will be no splashing during the process of dismantling and replacing the faucet, which will cause unnecessary trouble.

After closing the sluice, wait a few minutes to make sure the remaining water in the faucet is completely drained before proceeding with the follow-up operation, or take a discarded towel to absorb the water to reduce the waiting time.

Use a knife to pry open the protective sheet on the faucet handle, this protective sheet is just glued on, and it is easy to pry.

Select a screwdriver of the corresponding model (slotted mouth, cross mouth, etc.) to unscrew the screws of the faucet handle. Remove the faucet, because the faucet handle is fixed with occlusal tooth patterns, so the disassembly process requires a little force.

Open the bottom hinge, the disassembly work is completed, and the relevant tools should be sorted out in time.

Install the new faucet with the reverse steps above.

The villa master provides you with local building policies, building drawings, and villa design drawings;

Villa appearance renderings service, thousands of popular drawings for you to choose.

Villa Master.

1. Turn off the water inlet valve under the basin and cut off the water. 2. Turn on the faucet and drain the remaining water in the water pipe. 3. Use a wrench to remove the lower cover of the end of the water inlet hose and the faucet, and remove the water inlet hose.

4. Changxiao used pliers to unscrew the fastening screw of the faucet. 5. Remove the faucet. 6. Install the new faucet in reverse order of disassembly.

If your toilet faucet is broken, it can cause a lot of trouble in your life because you can't wash your face, brush your teeth, wash your hands, and use the toilet. Here, I'm going to introduce you to some ways to deal with it.

Step 1: Emergency water stopping.

When you find that the toilet faucet has broken, the first thing is to stop the water urgently. If the water is flowing all the time, not only will it waste water and electricity, but it will also add unnecessary expenses. Therefore, you need to find an emergency stop switch or close the water source valve to temporarily close the water pipe.

If you don't know how to find the water source valve or the emergency water stop switch, you can consult a professional hydraulic engineer or the technical support of the relevant pipeline safe.

Step 2: Troubleshooting.

After an emergency water stop, you need to troubleshoot. If the faucet is partially worn, a new faucet can be reinstalled. Before installing a new faucet, it is recommended that you consult with the Toilet Service Center and understand the repair process to ensure that you can repair the faucet problem efficiently and quickly.

Step 3: Replace the part.

If you need a replacement part, it is recommended that you purchase the same parts as the original beforehand. If you're not sure how to buy or install parts, you can choose to work with a professional warranty or repair service to ensure that do-it-yourself repairs are prohibited until repairs are not possible.

In conclusion, if your toilet faucet is damaged, you need to take timely action to fix the problem to avoid causing more trouble in your life. It is recommended that you take the above measures to replace or repair your faucet and seek professional help to ensure safety and reliability. Round.

Summary. Hello kiss Toilet faucet disassembly method: 1. Screw on the angle valve before disassembly:

Before you start disassembling the basin faucet, find the inlet valve, which is usually installed on the wall below the basin. Screw on the angle valve first to cut off the water, otherwise a large amount of running water will be wasted in the process of disassembling the basin faucet. 2. Turn on the faucet and release water

After screwing on the angle valve and disconnecting the water, there will still be some water left in the real water pipe, so you need to open the faucet and drain all the remaining water in the water pipe. 3. Remove the water inlet hose: When installing the basin faucet, the water inlet hose connects the water inlet port of the basin faucet with the angle valve, so when disassembling, hold the water pipe with one hand, twist the wrench with the other hand, and remove the water inlet hose to connect one end of the basin faucet.

4. Unscrew the fasteners: When the basin faucet is installed, it needs to be fastened after connecting the water inlet hose, and the nut will lock it, so after removing the water inlet hose, find the fasteners of the basin faucet, unscrew it with pliers or a wrench, and take out the basin faucet.

Hello kiss Turn off the inlet valve under the basin and cut off the water. Turn on the faucet and drain the remaining water from the pipes. Use the wrench to remove the end of the water inlet hose and the faucet connection, and remove the water inlet cress hose.

Use pliers to unscrew the fastening nut of the faucet. Remove the faucet. Install the new faucet in reverse order of disassembly.

It is a faucet for flushing toilets.

It is how to take out the faucet that flushes the toilet between a stainless steel pipe and the water pipe on the wall.

Hello kiss Toilet faucet disassembly method: 1. Screw on the angle valve before disassembly: Before starting to disassemble the basin faucet, find the water inlet valve, usually the water inlet valve is installed on the wall under the basin.

Screw on the angle valve first to cut off the water, otherwise a large amount of running water will be wasted in the process of disassembling the basin faucet. 2. Open the faucet to release water: screw on the angle valve, after disconnecting the water, there will be some water left in the real water pipe, at this time, you need to quietly open the faucet, and put all the remaining water in the water pipe.

3. Remove the water inlet hose: When installing the basin faucet, guess carefully, the water inlet hose connects the water inlet port of the basin faucet with the angle valve, so when disassembling, hold the water pipe with one hand, twist the wrench with the other hand, and remove the water inlet hose to connect one end of the basin faucet. 4. Unscrew the fasteners:

When the basin faucet is installed, it needs to be fastened and locked with a nut after connecting the water inlet hose, so after removing the water inlet hose, find the fasteners of the basin faucet, unscrew it with pliers or a wrench, and take out the basin faucet.

1. Before replacing the faucet, prepare a new faucet, water tape and a wrench.

2. Close the main valve of the water source to facilitate the follow-up work.

3. Clamp the faucet with a wrench, adjust it to a suitable position, press the wrench and slide the button with your thumb, and unscrew the broken faucet in a rotating way.

4. If you unscrew the faucet, you will see residual water and a little rust at the interface between the wall and the faucet, wipe it clean with a rag.

5. Wrap the threaded part of the new water hose with water adhesive tape, about ten times or so, and feel a certain thickness. First, install the new faucet to the wall interface in a rotating way by hand, and then use the Huhe wrench to slowly tighten it, adjust the angle of the faucet, so that you can't see the water adhesive tape, and feel that you can't screw it in, which is better.

6. Open the main valve of the water source, open the faucet to see if there is water seeping out from the interface, if there is seepage, it means that the water adhesive tape is too little winding, and it is necessary to unscrew it and re-wrap the water adhesive tape.

How to choose a faucet.

1. The surface is smooth and bright.

The faucet is relatively practical and can be regarded as a decorative effect, but we must choose a smooth and bright surface, as well as more comfortable to use.

2. Humanized design.

In fact, if the faucet chooses a humanized design, it is also convenient for us to be more simple in our daily life, especially if you can choose a pull-out faucet, which is more convenient, or choose to pull up the rotating faucet, which is also convenient for washing vegetables and dishes.

3. Choose a better one to clean.

The faucet must choose a better clean, because the kitchen is a heavier place, especially for Chinese, so we must choose a better clean when choosing a faucet, you can easily help you take care of it with the help of a busy dish soap, but do not choose to use steel wool, so as not to close the surface of the faucet, affect the overall beauty, and will also affect our life in the future.

4. Choose environmentally friendly materials.

In fact, when choosing a faucet, you must choose, that is, the environmentally friendly material is relatively high, which is the key and the top priority. After all, the faucet is related to the water situation of the family, so the safety of the family must be ensured in the choice of faucet, so the choice of material will be divided into a lot, try not to choose, all copper or stainless steel, which also affects the effect, and must choose good environmental protection, corrosion resistance is relatively high.