How to change kitchen faucets Teach you to change faucets

The frequency of use of kitchen faucets is relatively high, once the faucet leaks, not only is it a waste of water resources, but also the sound of water droplets and the long-term humidity of the space will affect the health of the family. At this time, we need to check out what is wrong with the faucet, or to replace the faucet, the following, let's give you a detailed introduction to the replacement method of the kitchen faucet!

First, the structure of the kitchen faucet

The faucet is composed of the main body, valve core, handle, water filter, water outlet, installation components, etc. Some faucets also have check valves, aerators, fixing bolts, fixing copper sheets, gaskets, elbow feet, hoses, general gauges, stop gauges, etc., and different faucets will be a little different.

Features of kitchen faucets:

Multi-function kitchen faucet: If there is a hot water line in the kitchen, this faucet should also be double-connected. In addition, kitchen faucets have taller, longer spouts, and some have hoses for washing food.

Second, how to change the kitchen faucet

Hardware and faucets are used every day, and wear and tear is inevitable. Just turn out these pieces, add a new product replacement, some personality design and more powerful features that can make a significant difference in the kitchen.

1. We all know that there is generally a general switch under the kitchen faucet, and the total switch can be turned off before replacement. In general, the first step is to turn off the main switch and cut off the water source.

2. After turning off the water source switch, please go to the water injection pipe to find the interface of the faucet, pinch the metal joint above the water pipe, rotate it a few times to the left and right, and remove the old faucet.

3. After the water pipe is removed, put it aside, this is what you will find, the joints and walls of these water pipes are very dirty, and there are such pipes in the hardware store, you can replace the original old pipes. Because the original pipes have been weathered for a long time, leaking, etc., so you can also replace them while changing the faucet.

4. After removing the water pipe, please hold the song faucet with your hands, and then rotate it left and right to loosen the faucet.

5. After loosening the faucet, you can easily remove the plastic knob under the faucet. Then the entire faucet can be removed.

6. Install the new faucet directly, and then turn on the general switch to test its use.

The above about what to do if the kitchen faucet is broken and how to replace the kitchen faucet is briefly introduced here, I hope it will help you, if you encounter the technical work of faucet replacement in the future, you can replace it yourself, think about it and feel proud!

Prepare the tools you need, such as pliers, wrenches and screwdrivers, and if you only need to replace the faucet parts, then you need to prepare the parts that need to be replaced, and turn off the main valve.

If the screws of the faucet are attached under a plastic sheet, plastic button, or metal button, the handle screws mounted on the top of the faucet can be removed by simply opening the button.

In the process of replacement, some water inlet hoses have been used for a long time, and there will be rust or catalytic fasteners, so that the water inlet hose can not be unscrewed, in this case, you can drip oil on the rusty place, and then take out the basin faucet.

Kitchen. It is an indispensable part of every family, plays a very important role in daily life in China, and the faucet is one of the indispensable tools in the kitchen, now most of the family kitchens are installed with hot and cold water faucets, but the faucet will inevitably leak during use, many people do not know how to dismantle the kitchen water water faucet. Next, let's take a look at how to disassemble the kitchen faucet and what to pay attention to when replacing the kitchen faucet.

1. How to disassemble the kitchen faucet.

1. The first step is to prepare the required tools, the required tools are pliers, wrenches and screwdrivers, if you only need to replace the faucet parts, then you also need to prepare the parts that need to be replaced, and then turn off the main valve.

2. Remove the small screws behind or above the faucet, remove the handle fixed on the faucet, some faucet screws are installed under the plastic sheet, plastic button or metal button, in this case, you only need to open the button to remove the handle screw installed on the top of the faucet.

3. If the screws of your faucet are installed in the hole, you can first use a flashlight to see whether the screws inside are slotted or cross-mouthed, and then use the corresponding screwdriver to disassemble them. Some faucets use inner square hole screws, which are a little troublesome to disassemble, so be careful not to damage the screw mouth during the removal process.

4. After removing the nut with a movable wrench, you can remove the valve core of the faucet. After removal, observe whether the copper plane under the valve core is uneven or sandy, and if so, it should be clear and clean.

2. What should I pay attention to when replacing the kitchen faucet.

1. Some water inlet hoses have been used for a long time, and there will be rust or catalytic fasteners, so that the water inlet hose can not be unscrewed, in this case, you can drop the oil on the rusty place, and then take out the basin faucet.

2. Single-hole faucet is a kitchen faucet commonly used in many families, and the place to pay attention to in installation is to complete the basic fixing, and the installation screws of the faucet need to be fixed to avoid the faucet being loose.

3. When installing the thermostatic water short, one thing to note is that the faucet water pipe is divided into two types: hot and cold, and it is necessary to distinguish the installation when installing, do not mix it, otherwise the faucet will not be able to produce water, in addition, don't forget to install the hot and cold water filter.

In life, many quiet people should encounter the problem of needing to replace the kitchen faucet, but many people do not know how to replace the kitchen faucet when they need to replace it, in fact, the main reason is that everyone does not know enough about the steps of replacing the faucet, and does not know enough about the precautions in replacing the kitchen faucet. So how do you change the faucet in the kitchen? What are the precautions for replacing kitchen faucets?

How to change the faucet in the kitchen.

1. Turn off the sluice gate of the faucet of the house first, usually there is a sluice next to the water meter. Some dishes will have a small opening under the tray, and it will be more convenient to use this small sluice, and then reach under the sink to unscrew the fixing screw of the faucet, which can usually be unscrewed by hand. After removing the old faucet, the two inlet hoses are connected to the faucet, and the interface is long and short, which is said to be designed for easy installation.

2. Then put the two inlet hoses into the hole reserved for the sink, and fix the faucet with a nut below. The other end of the inlet hose is connected to the inlet pipe, so if you're a hot and cold water tap, remember to distinguish between them. Wrap the waterproof tape and tighten it with a wrench.

Open the water inlet valve and check for water leaks.

Kitchen faucet replacement precautions.

1. Some water inlet hoses have been used for a long time, and the water inlet hose cannot be unscrewed for a while due to embrittlement or rusty fasteners. You can take out the basin faucet after two or three drops of oil can be applied to the rusty area.

2. Single-hole kitchen faucet: This is a common kitchen faucet, and the key points of installation are also basic fixing, and the installation screw of the faucet needs to be fixed to avoid loosening.

3. Installation of thermostatic kitchen faucets: One thing that needs to be paid attention to is that the thermostatic faucet has two water pipes, hot and cold, so it is necessary to distinguish between hot and cold water pipes when installing, and cannot be mixed, otherwise the faucet will not come out of water. Hot and cold water filters are also required.

4. The installation precautions for other faucets are similar to the above two categories. In addition, in terms of appearance and function, it is necessary to confirm the quality of the faucet accessories before installation, so as not to be unusable after installation, and have to be disassembled.

Replacing the kitchen faucet in life is often something that needs to be done, so everyone should try to learn how to replace the kitchen faucet, which will be a great convenience for future life. Here, I also hope that the introduction of how to change the kitchen faucet, as well as the reference content of the kitchen faucet replacement precautions, can help you learn to replace the kitchen brother room water faucet as soon as possible, and bring convenience to everyone's life.

1. Before replacing the faucet, we need to prepare a new faucet, water adhesive tape and a wrench.

2. Close the main valve of the water source to facilitate the follow-up work. (It's important to keep in mind this step before you get a splash when you remove the faucet.)

3. Hold the faucet with a wrench, and after adjusting it to the appropriate position, press the wrench with your thumb to slide the mechanism button, and unscrew the broken faucet in a rotating way.

4. After screwing to a certain looseness with a wrench, you can directly unscrew it by hand, and you will see that there is residual water and a little rust at the interface between the wall and the faucet, and wipe it clean with a rag.

5. Wrap the threaded part of the new water hose with water adhesive tape, about ten times or so, and feel a certain thickness. First, install the new faucet to the wall interface in a rotating way by hand, and then slowly tighten it with a wrench, adjust the angle of the faucet, so that you can't see the water adhesive tape, and feel that you can't screw it in, which is better.

6. Open the main valve of the water source, open the faucet to see if there is water seeping out from the interface, if there is seepage, it means that the water adhesive tape is too little winding, and it is necessary to unscrew it and re-wrap the water adhesive tape.

Don't worry about replacing the faucet at home, just replace the broken new faucet in time, but how to replace the faucet? Many friends who change the faucet for the first time do not know how to start, here I want to teach you how to replace the faucet, so that when you encounter the replacement of the faucet, you can easily replace the broken faucet with a new faucet. Of course, in addition to teaching everyone how to replace the faucet, we also have to teach everyone the knowledge of daily maintenance of the faucet.

Step 1 of replacing the faucet, turn off the water supply, just turn off a water supply valve near the faucet to turn off the water supply, but if not every faucet is equipped with a water supply valve, you have to turn off the main water supply valve to close all water supply. 2. Push-type faucet: No matter what kind of appearance the press-type faucet has, whether it has two handles for hot and cold water or only one handle that controls hot and cold water at the same time, it works according to some basic principles.

3. Remove the small screws on or behind the faucet handle to remove the handle fixed to the faucet body. Some screws are hidden underneath metal buttons, plastic buttons, or plastic pieces that snap into or screw into the handle. As soon as you turn the button on, you will see the handle screws mounted on the top.

4. Use an adjustable wrench to remove the filling nut, being careful not to leave scratches on the metal. Rotate the spool or shaft in the same direction as when you turn on the faucet to unscrew them. How to change the faucet seal 1. Turn off the water supply and remove the faucet handle.

2. Unscrew the filling nut and remove the nut and the old sealing ring from the valve core. 3. Install a new sealing ring. If you are using a wire sealing material, wrap it around the spool a few times.

In the case of sealing materials such as soft wires, only one loop is wrapped around the spool. 4. Before reassembling the faucet, apply a thin layer of petroleum oil to the threads of the valve core and the threads of the filling nuts. Daily maintenance of the faucet 1. After using it for a period of time, if it is found that the water output is reduced, or even the phenomenon of the water heater going out, the faucet may be blocked.

2. The faucet that has not been used for a long time will sometimes occur incomplete closing, leakage, loose handle, loose connection port and water leakage, etc., usually due to hard debris stuck in the sealing port, just remove the handwheel and unscrew the valve cover, clean up the impurities around the valve core and install it as it is to resume normal use. Whether you want to remove a broken faucet or replace it with a new one, you need to remember to turn off the water valve of the faucet to ensure that it does not run water when replacing the faucet. When replacing the faucet, you need a lot of special tools, such as a wrench is one of the most necessary tools to change the faucet, and you must make sure that the tools are complete when changing the faucet.

The tips for daily maintenance of the faucet are very important, and the correct maintenance can enhance the use effect and service life of the faucet.