What to do if the faucet is turned off and keeps dripping

Solutions for dripping water from faucets:

If the faucet keeps dripping, the first thing to do is to detect the faucet malfunction and find out the cause of the dripping. Most faucets are old for a year or two, and the valve spools are generally worn out. Just buy one and exchange it for yourself. The specific steps are as follows:

Preparation tools: spool, faucet, small pliers.

1.Start by disassembling the faucet's switch.

2.Unscrew the screws inside, and you can see the spool.

3.Use small pliers to pull out the valve core directly.

4.Prepare a new valve core and aim it to push directly. It can be used normally after replacement. You'll never have to worry about a leaky faucet again.

The faucet is turned off and has been dripping water can be solved like this:

1. Turn off the water source, then use a tool to disassemble the label above the faucet and unscrew the screws inside.

2. Remove the handle, and then turn the valve core in the direction of the faucet until the valve core is removed and set aside.

3. Remove the fixed sealing ring.

screws, and then buy a new seal to replace it.

4. Restore the faucet parts, test it, if the faucet is still leaking after closing, you need to replace the faucet with a new one, if the faucet is closed and does not leak, it means that the installation is qualified.

Tips for buying *** faucets

1. Look at the faucet spool.

The valve core is like the heart of the human heart for the faucet, which is the most critical part, so the valve core is also an important factor in determining the service life of the faucet. When purchasing, users should choose the best spool, so that the life of the faucet will be longer.

2. Look at the faucet process.

The production process of the faucet is also very critical, the faucet with a good production process, the galvanized layer on the surface is smooth and shiny, and the paint film has no color difference, and there will be no defects such as black spots and leakage plating. When purchasing, users should carefully check the surface of the faucet to ensure that it is smooth and free of defects.

At this time, you will see that there is a small hole, the fixing screw of the handle is inside, generally with a flathead screwdriver to reach in counterclockwise can be wrung out, and then pull out the handle, sometimes it will be very tight and can not be pulled out, then it needs to use more strength The faucet is still dripping after the faucet is closed, most of the reason is that the ceramic valve core in the faucet is worn, and there is no need for maintenance. Even if you want to fix it, you can't buy a spool. If you can fix it, it is estimated that the manufacturer will go out of business.

The rubber mat on the <> surface will remove impurities, or if it is caused by wear, it will drip after being turned off. If you don't want to replace it, you can disassemble it yourself, remove the impurities inside later, and replace the gasket if the seal is worn. If your hands-on ability depends on what kind of faucet you are, the value is high, you can repair it, close it tightly, and drip water, basically general, there is no need to repair it, there is no value of repair, there are few such accessories on the market, and it is simple and convenient to change a new one, and there is a screw pattern when you replace it.

There may be several reasons why the faucet is still dripping when it is turned off, and only by understanding the reason can we prescribe the right medicine: if it is dripping at the faucet connection, then you can take off the faucet and wrap it around a layer of raw material belt; If the switch of the faucet is leaking, it may be that the valve core of the closing valve is broken, first check whether the card position of the handle cover is automatic, check whether the valve core is loose when moving the handlebar, if it is not loose, the copper valve core will be directly worse, and the installation will not fall into the water.

Replace the old gasket with a new, identical one. A new gasket that is almost exactly a match for the old gasket will generally stop the faucet from dripping. You'll also want to notice if the old gasket has a bevel or is flat, and if the faucet is still dripping after closing the spool with the same new gasket in

Generally, this phenomenon should be due to the long-term wear of the shaft gasket in the faucet. This requires a spacer, which can be unscrewed with a wrench. If there is water seeping from the faucet and the pipe, this situation may be caused by a loose cover screw, which is easier to do and just replace the nut.

Find a professional repairer, and treat the specific problem specifically, probably because the spring can't bounce up, just change the faucet.

A faucet should be replaced, the dripping is because you already have a problem with the valve, so you only need to replace one valve, and the dripping problem can be solved.

In this case, the faucet should be replaced, which is a problem with the valve of the faucet, otherwise it will continue to drip and waste water resources.

If you want to repair it, in fact, the best way is to see if the valve part of this faucet is loose, if it is loose, you can replace one, and it will not drip anymore, it is very simple.

It is estimated that the rubber pad in the faucet is aging or broken, resulting in the faucet not really tightened or there are cracks that will seep water.

After removing the screws, you will find that there may be a small hole in the valve core of the faucet, at this time you can also cut a size yourself, relatively speaking, the more suitable rubber pad is installed in this hairstyle, so that you can help the worn parts to return to their original state, and then install the installed valve core into the faucet, and then you can solve this problem very well. Then slowly open the water valve to see if it is still leaking.

In general, this is a broken valve. In fact, it is not recommended to repair, buy a new one, it is very troublesome to repair, and you need to disassemble the valve core. It's possible to buy a new one as well.

Replace the faucet with a new one, because this situation is caused by the aging of the gasket inside the faucet, and it is very difficult to replace this gasket, it is better to replace it with a new faucet.

The faucet is turned off and still dripping, what should I do if the position is not good to replace it? In this way, there is no need to change the faucet.

Get a new one. The faucet is not expensive, it is troublesome to repair, and if it is not repaired, it is dripping and dripping, and it is a waste of water.

If water drips from the faucet even after it is turned off, it may be that the gasket or O-ring inside the faucet is damaged or deteriorated. You can follow these steps to fix this:

1.Turn off the water source: Before treatment, turn off the water source to avoid water waste and water pressure damage.

2.Remove the faucet: Use a tool such as a wrench to remove the faucet and place the removed parts on a clean, soft cloth.

3.Replace gaskets or o-rings: Look for gaskets or o-rings to see if they are damaged or aged. If you need a rough makeover to be replaced, you can buy a new gasket or o-ring of the same model at your local hardware store or material market.

4.Assembling the faucet: Clean the gasket on the inside of the faucet and install the new gasket or O-ring in the correct place. Then, Honghe reinstalled and tightened the faucet.

5.Turn on the stool to keep an eye on the water: Once installed, turn the water back on and check if there are still leaks. If you're still having trouble, you may need to seek the help of a professional plumbing repairer.

The faucet is turned off and has been dripping to repair the steps as follows:

1. The leakage of the faucet outlet should be caused by the wear of the axial gasket in the faucet. The solution is also very simple, just unscrew the lid of the faucet with pliers, then remove it, take out the shaft spacer, replace it with a new shaft spacer, and the problem is solved.

2. Water leakage around the valve core: This situation is mostly caused by the loosening or displacement of the valve core, you can try to remove the valve core and reinstall it, so that it will not drip all the time.

3. If it is not only the faucet that has been dripping, but also the faucet joint is leaking, it may be that the nut at the joint is loose, and you only need to replace it with a new U-shaped gasket and tighten the nut.

4. If there is still no problem in accordance with the above hunger steps, then directly replace it with a new faucet, if you can't change it, you can contact a professional maintenance personnel to replace it.

Faucet selection tips

There are three common spools: ceramic disc spools, stainless steel ball spools, and shaft roller spools. Ceramic spool is preferred.

You can use your index finger and middle finger to gently grip the faucet handle and gently swing it up and down, left and right, to see if it is flexible and not loose, and whether it blocks the feel. If not, it means that the stool limb feels very good, and the quality of the faucet valve core is passable.