A series of questions about wireless wireless router and laptop connections. Hope for the master to

Connect the router and the cat, confirm the location of the WAN port and the LAN port, generally there will be IP, username, password on the back of the router, and then open a web page to enter the IP, enter the username and password as required, enter the router settings, select the setting wizard step by step, if the telecom gives you the account and password, select PPPoE, if it is a fixed IP, subnet mask, gateway, etc., select static IP, and then go to the next step, after completion, Click Clone MAC address in MAC Address Clone in Network Parameters and save it.

After setting up the router, set the computer to automatically obtain the IP address, and the Internet protocol --- attribute --- local connection --- attribute ---.

If you still can't access the Internet after obtaining the IP, you can manually fill in the obtained IP and then fill in the local DNS of Telecom.

There are too many things to say in the settings, I recommend that you follow the **instructions on the official website to set up, which is very clear.

It's not easy!! It's the way you add a disc player and a TV!! If you don't have a good internet connection, you'll get stuck with 2 computers, and both computers will get stuck!!

And then you plug in the router and there is an instruction inside !! Enter**Set a lot of them!! That**You can get in without the Internet!!

Give points!!

1. Connect the power supply of the wireless router.

2. Connect the router to the port with a network cable.

3. Connect the laptop network cable to the router (wired connection).

4. According to the IP address and account password provided in the manual, enter the router setting interface from the IE address bar. Generally, the account and password are admin. Of course, it may be different. You can refer to the manual or check it online.

5. Set up the router according to the instructions in the manual and your own broadband account password.

6. Set wireless passwords, etc.

8、enjoy it

Not sure about the brand and model of your router, but to get started, it's best to use a network cable to connect your laptop to any LAN port of the router, and then log in to the router address (or. Not necessarily look at the name tag at the bottom of your router to determine) to set up the specific setting method, you need to be able to check the Internet or contact me.

1. Connect the wireless router and the laptop with a network cable, set the laptop IP and the routing IP to the same network segment, and then enter the router Enter the router's management account and password 2. Set the router's wireless settings and set the wireless password. Set the MAC address to allow access. (Set your laptop's MAC address to allow access, so that you can prevent others from using your wireless router to access the Internet).

3. Then remove the network cable, connect your router with a laptop wireless network card, and enter the wireless password.

You can go online (provided that your wireless router is connected to the Internet).

Let's assume that there are two rooms in this house, one for computer A and one for computer B, and the Internet access is connected through ADSL, and ADSL is connected to computer A, and computer B in the other room does not have Internet access.

Now, let's take TP-Link's TL-WR541G wireless broadband router and TL-WN550G wireless PCI network card as examples to see how to install and configure them to meet our requirements.

The installation of the hardware is quite simple: at computer A, connect the ADSL modem to the WAN port of the wireless broadband router through the network cable that comes with the ADSL modem, and prepare a 50 cm long network cable to connect the network card of computer A to the LAN port of the wireless broadband router.

Then install the wireless network card in computer B, and install the drivers and utilities in the CD-ROM that come with the wireless network card, and finally connect the power of the wireless broadband router, so that the installation and connection of the hardware is completed.

Basic configuration of a wireless router.

Refer to this article.

tp-link

About 150 If you don't need to dial up the Internet, you just need to turn on the wireless, there will be no manual, and you won't be able to let the store set it up for you to take away.

Very simple. If you can buy it, you can go to Jingdong or ****, it is recommended to buy tp-linkYou can take a look at the sales volume.

Like you, you can buy a single antenna at a distance of no more than 100. If you install it, you can follow the setup wizard. I have any other questions to ask me.

Could it be that the router has banned the mac address of this computer? Change the MAC address of the netbook to see if the LAN is working.

Using wireless routing has a distance limit and the two can't be too far apart.