How to remove a ceiling? How to disassemble the ceiling?

When the original ceiling decoration is removed, attention should be paid to remove it as much as possible and not retain the original ceiling decoration structure. In particular, the structure that carries the weight of the ceiling such as the boom and pendant in the original ceiling must be removed, which is mainly for future safety considerations. When dismantling, the power supply should be cut off first, and the original circuit pipeline in the ceiling should be removed as much as possible, and no longer consider continuing to use, because the original circuit in the ceiling has basically no use value.

When demolishing, it is necessary to consider the safety of the equipment and facilities in the original ceiling, many old houses in the last century have heating pipelines in the ceiling, and some residences are the first air conditioning system, so as to avoid damage to the pipelines and equipment due to inattention during demolition. Kitchen and bathroom should avoid damage to ventilation ducts and flues when removing the original suspended ceilings.

Prepare several suction cups in advance for integrated ceiling disassembly, gently stick to the four corners of the ceiling panel, suck the air away, suck one of the corners tightly, and pull it out forcefully, you can disassemble a whole board. After dismantling, if you want to replace the ceiling with another style, you need to clean it first. Each plate is equipped with an edge banding auxiliary keel around it, which mainly plays the role of connecting the module and the light steel keel, effectively ensuring that each plate can be closely connected to each other.

It should be noted that when the original ceiling is removed, the safety of the equipment and facilities inside the original ceiling should be taken into account to avoid accidentally damaging the pipeline during the demolition. When the ceiling of the kitchen and bathroom is removed, the previous pipeline can be removed and replaced with a new circuit pipeline. When dismantling and renovating the ceiling, it is necessary to pay attention to whether the indoor light source is affected, and the height should be moderate, which will have a positive impact on the decoration of the interior or the wall.

If it is a second-hand house ceiling for demolition, safety should be given priority, the building structure of the old house has been aged, and many holes will be made when the structure is required to be hung during construction, so the local bearing capacity is greatly reduced. The square aluminum gusset ceiling ceiling is purchased with a suction cup in advance, and it is firmly attached to a corner of the square, and the corner of the aluminum gusset will be warped by pulling hard, and the other three corners can be removed using the same method. If it is a strip-shaped aluminum gusset, the installation is carried out by pressing one by one, and the last one will have a small seam of 1 cm.

Use a wallpaper knife to insert a few more strokes back and forth along the small gap to find the location of the clip. Gently pry downward, pry the middle first, if the pry on both sides is easy to deform. When dismantling the old ceiling, it should be dismantled as much as possible, especially the internal boom and pendant, etc., and the structure that carries a part of the weight must be removed.

It is best to cut off the power supply before disassembly, and try not to use the original line pipe for a second time. Different ceiling materials have different installation processes, so their dismantling methods are also different, for the problem of how to dismantle the ceiling, but also according to the actual situation, so as to effectively save costs and ensure the safety of construction. <

As long as you gently close the board on the board, suck the air away, suck one of the corners, and then pull it out hard to pull out the four corners, you can disassemble the whole board and clean the inside. When the outer panels are removed, the internal structure can be seen. Among them, each plate is equipped with an edge banding auxiliary keel around it, and the auxiliary keel plays the role of connecting the module and the light steel keel to ensure that each plate can be closely connected to each other.

When the original ceiling is removed, the safety of the equipment and facilities in the original ceiling should be considered to avoid damage to the pipeline and equipment during the demolition; When removing the original ceiling in the kitchen and bathroom, it is necessary to avoid damaging the ventilation duct and flue; The original circuit pipeline in the ceiling should be removed as much as possible, and no longer considered for continued use; The kitchen and bathroom ceiling removal and transformation should pay attention to the impact on the indoor light source, and the ceiling height is also very convenient to unload and clean, as long as three small steps: suction, pulling, and disassembly. The manufacturer will match moderately, which will have an impact on the wall decoration and soft decoration in the future.

Summary. Pro, the method of disassembling the ceiling of the ceiling:

Pro, the method of disassembling the ceiling of the ceiling:

1. Before purchasing the integrated ceiling, the manufacturer will generally be equipped with a suction cup tool, so we need to use the suction cup when disassembling the hug, gently buckle the suction cup to the board, and then pump out the air inside to achieve a vacuum state.

2. After the above steps are completed, Lu Mori Xiao needs to pull this step, and after the integrated ceiling is sucked up, pull it out hard. The other triangles should also be pulled outward to keep the four corners loose.

3. The last step is to disassemble, and it is worth our attention that we must be careful when removing the whole board to ensure the integrity of the whole board.

1.The ceiling made of waterproof plasterboard needs to be dismantled with auxiliary tools such as suction cups. Prepare the suction cups to suck on the four corners of the ceiling, after making sure that the suction cups are tight, select one of the corners and pull the suction cups down forcefully, so that the whole ceiling can be easily removed.

2.The ceiling made of aluminum gusset jujube material needs to be cut in the gap of the ceiling with a wallpaper knife when dismantling, and the position of the ceiling buckle can be found during the cutting process, and then it can be gently pried down, so that the ceiling can be dismantled. Note that when dismantling, it is necessary to remove all the pendants, booms and other items to avoid potential safety hazards.

Home decoration, many people like to install different ceilings in the living room or kitchen, bedroom to meet the needs, but sometimes in the process of decoration, you may encounter the problem of loose joints, so you need to remove the gusset of the ceiling. How do I remove a ceiling panel? What are the materials of the ceiling?

1. How to disassemble the ceiling panel.

1. Some of them are strip-shaped ceiling panels, we only need to prepare a wallpaper knife, insert it along its gaps, and then make a few strokes. Find its buckle position first, and then knock down, you can knock the middle first, and then knock on both sides, you can remove the ceiling buckle plate.

2. If it is a ceiling gusset made of PVC material, you can see if there is glass glue when installing. If we hit it, we can first use a knife to remove the glass glue, and then use a screwdriver to gently pry in the gap between the penultimate block and the first piece, we can loosen this piece of PVC board, and then push the left and right sides. Some gussets may have self-tapping screws, so you can remove the self-tapping screws first and then slowly disassemble them.

Second, what are the types of ceiling materials?

1. Gypsum board ceiling, it is also a major material, mainly building gypsum, its strength is relatively high, generally speaking, it can be used for interior walls or partition walls, and the decorative performance is very good.

2. Many people choose PVC board for ceiling, which is more practical and practical, and is the preferred ceiling material for home decoration. PVC is relatively light in weight, waterproof and moisture-proof, and flame retardant materials are added in the production process, so it has a certain flame retardant effect, and it will be safer to use, and it is very practical to use the ceiling for the bathroom or kitchen.

3. There is also an ecological wood ceiling, that is, artificial wood, which is not particularly expensive, but it is more environmentally friendly and energy-saving, and it is a relatively natural environmental protection material.

The above content is if you want to disassemble the ceiling panel, what steps should be followed, you need to prepare relevant tools, and then disassemble them one by one, there is no trouble.