The gas meter often stops gas, and the battery is normal when it is re installed

The gas meter will stop gas, and it will be normal to reinstall the battery, which should be caused by insufficient battery power.

In this case, you can buy a new battery and replace it to solve such a problem. Because when the battery is low, the output power is unstable, so when you take it back and install it again, the instant power is just enough for the meter to use, that is, you said that reinstalling it will be good for a while. So you only need to buy the same model of battery replacement to solve the problem.

Personally, I suggest that you should pay attention to how long the battery can last each time you install it, and then replace it regularly in the future so that no such problem will occur.

This is because the gas meter records gas data under the premise of power supply, if the battery is dead, the meter will not work normally, so the gas is often stopped.

It is possible that the battery clamp is dirty or does not touch well. Reloading will improve the situation. You can inspect the battery clamp to see if it is rust or stained.

That's the problem with the battery. First of all, the stubble of insufficient power is eliminated. Change the battery to see if the gas is still often stopped. If it doesn't work after changing the battery, then if you suspect that the battery box is in poor contact, you can ask the master of the gas company to come and take a look.

The gas meter is often cut off, and the battery can be used normally by reinstalling the battery, which should be the poor contact of the battery box of the gas meter.

This type of gas meter is generally a smart meter and is powered by a battery. If the battery voltage is too low or it is dead, it will run out of gas. Replace it with a new battery and it will recover. FYI.

The gas meter often stops, and it is enough to reinstall the battery. It may be caused by poor contact of the chip at the battery of your gas meter, and you can polish the chip with sandpaper!

Let the master of the gas company check it, the battery of the gas meter can generally be used for a long time, this power consumption is small, if the battery needs to be replaced often, it is not normal, and the safety of gas is the most important.

It is recommended to have the gas company inspected, safety is the most important.

The gas meter still does not ventilate after replacing the battery for the following reasons:

The pipeline is blocked, and the air intake plate is not enough; The pressure is not enough, resulting in the inability of air to come in; The gas is not enough, ** is insufficient; The door was too small.

The prerequisites for normal ventilation of the gas meter are as follows:

There is a residual gas volume in the meter; There is no major fault in the gas meter; The battery voltage is normal; Pipeline ventilation is normal.

Combined with the above four points of gradual investigation, first check the status of the pipeline valve (normal ventilation), and then check whether there is enough gas volume in the meter.

The former reminds that the remaining gas is insufficient and that gas needs to be purchased as soon as possible; The latter reminds that a purchase is required to use it. If the former is re-inserted into the card or press the query key to re-open the valve for use, in the latter case, you can only buy gas.

Natural gas can't start after replacing the battery according to the meterSolution:

This type of watch uses four batteries, which are mounted under the front of the meter, and if you look closely, you can see the lid that closes the battery. After opening the lid, remove the original battery and replace it with a new one. Be careful not to pretend to be reversed here.

The easiest way is to take a photo with your mobile phone before removing the old battery, and install it with **.

The service life of this smart gas meter battery is more than one year, and it is best to check it at a fixed time. Of course, according to different smart gas meters, there may be some differences, users can check the local gas company's ** consultation, or follow their instructions to replace.

Dear, hello I am the answerer Xiao Xiao, I am happy to serve you Open the gas valve, insert the natural gas card into the card slot, and start it when you hear the dripping sound. Outside the gas meter, you can only see a digital scroll wheel in a small glass window, and there are seven digits on the wheel, the first four decimal places are black, and the last three digits are red. The automatic accumulation function of the gas meter makes it easy for those who use natural gas or piped gas to know how much gas they are using so that they can pay according to the cubic meters of gas consumed each month.

Precautions for the use of gas meters 1, if gas is not used for a period of time or a long time, it is necessary to close the valve in front of the meter and the valve in front of the stove in time, and take out the battery in the meter to prevent battery leakage and damage to the gas meter. 2. After each gas purchase, the gas volume should be entered into the gas meter in time. 3. The range hood and microwave oven should be kept at a certain distance from the gas meter to prevent damage to the gas meter caused by electromagnetic interference.

The gas meter can be started normally after the battery is replaced, and the method is as follows: 1. When the gas meter shows lo, it means that the gas meter needs to replace the battery, if it is determined that the gas meter is out of power, then the battery must be replaced. 2. First find the battery back cover and open it.

3. Remove the original battery and replace it with a new battery, which is to pay attention to the number of batteries the primary battery is, and the same is true for the new battery. 4. There will be a card strip stuck with the battery in the battery card slot, which should remove the battery with a large space first, and then remove the battery with a small space. 5. If there is a foreign object in the card slot, remove the foreign matter in the card slot and install a new battery.

6. Close the lid to start normally.

Yes. After the gas meter battery is out of power, there will indeed be a gas outage, because after the battery voltage becomes smaller, the gas valve will automatically close the gas output, so it will cause residents to have no way to use the gas normally, but if the new battery can be replaced in time, the original gas supply state can be restored.

Gas meters with batteries belong to smart gas meters, including IC card gas meters, NB-IoT Internet of Things gas meters, etc., these are all smart gas meters, when the power is insufficient, the gas meter will prompt the user to replace it in the form of sound and LCD screen display** or text, and it will be displayed in turn: "00000001", "00000002", "Replace the battery".

When the LCD screen prompts the "00000002" user does not replace the battery, the gas meter has automatically closed the built-in valve to block the gas, at this time, the user's home gas appliance is unable to ignite the gas, must replace the new battery to continue to use, generally 4 No. 5 dry batteries, it is recommended to choose some better quality batteries.

Hello dear, I am happy to serve you: the gas meter starts without gas after changing the battery because the gas meter in the process of changing the battery, remove the old battery, the gas meter will automatically close the valve when there is no power, and the battery will not be automatically opened if the battery is reinstalled. Generally, the flameout and the battery have little to do with the process of use, first of all, see if you have the same phenomenon upstairs and downstairs neighbors, if not, you can rule out the gas outage maintenance.

However, this gas outage is generally notified, and it usually does not stop suddenly. Then determine whether the stove is normal gas output, press and hold the switch to listen to the sound, if there is a gas sound, you can determine that the stove is basically normal. Then replace the battery, which you did but still can't ignite, so if it's not the first case, it should basically be the second step, the stove problem.

Summary. The gas meter still does not ventilate after replacing the battery, the reasons are as follows: the pipeline is blocked, and the air intake version is not enough; The pressure is not enough, resulting in the inability of air to come in; The gas is not enough, ** is insufficient; The door was too small.

Please wait patiently for a few minutes, we are sorting it out, and we will answer you immediately, and please do not end the consultation.

After the gas meter replaces the battery, it still does not eliminate ventilation due to the following reasons: the pipeline is blocked, and the air intake version is not enough; The pressure is not enough, resulting in the inability of air to come in; The gas is not enough, ** is insufficient; The vertical key door is too small.

Summary. If the gas meter still does not ventilate after replacing the battery, please check the following components: 1. Check the valve status of the natural gas pipeline first to see if its ventilation is normal.

At this time, you need to open the valve of natural gas and find the red function key on the LCD screen. Then, press and hold the function button for about 3 to 5 seconds to let the gas automatically reuse. At this time, only a "drop" needs to be heard, and the restart is successful.

2. Check whether the current displayed in the natural gas meter is sufficient, if the gas is insufficient, you need to go to the natural gas company to go through the procedures for purchasing gas, so as to facilitate normal use in the future. 3. If the natural gas pipeline is blocked, there will also be impermeable ventilation, and it is necessary to contact professionals in time to dredge the natural gas pipeline, which is a more dangerous job, so individuals should try not to deal with it without authorization.

What should I do if the gas meter still does not ventilate after changing the battery?

If the gas meter still does not ventilate after replacing the battery, please check the following components: 1. Check the valve status of the natural gas pipeline first to see if its ventilation is normal. At this time, you need to open the valve of natural gas and find the red function key on the LCD screen.

Then, press and hold the function button for about 3 to 5 seconds to let the natural gas answer automatically reuse. At this time, only a "drop" needs to be heard, and the restart is successful. 2. Check whether the current displayed in the natural gas meter is sufficient, if the gas is insufficient, you need to go to the natural gas company to go through the procedures for purchasing gas, so as to facilitate normal use in the future.

3. If the natural gas pipeline is blocked, there will also be impermeable ventilation, and it is necessary to contact professionals in time to dredge the natural gas pipeline, which is a more dangerous job, so individuals should try not to deal with it without authorization.

Attention should be paid to the use of natural gas: 1. When using natural gas, it is necessary to ensure the circulation of air, so as not to produce a large amount of coarse carbon monoxide, which will lead to the risk of personal suffocation. If the kitchen is small and the ventilation effect is not ideal, you can set up an exhaust fan to achieve the effect of exhaust.

2. When cooking with natural gas, someone should be on the side to take care of it, which can effectively avoid the overflow of domestic soup and fire. If an individual needs to leave in time, the gas switch must be turned off. 3. Natural gas has been used for a long time, and it is necessary to replace the gas pipeline.

If some hoses are used, after about two years of use, there is a possibility that they will deteriorate and crack, and they need to be replaced with a new pipe in time. I hope my answer is helpful to you, and I wish you a happy life!