-
First of all, we have to look at the steps of the downstairs owner,**The ISO file does not need to be uncompressed,If it is a file like RAR,After decompression,Look at the content in the folder,It's ISO,Don't unzip it either,If you see a file like bin ending,You have to compress the file into ISO,Use alcohol。 Then choose to burn the image when burning, and engrave the ISO into it. The second point is that PS2 is not good for the disk support of ***+r, especially the landlord said that the disk time is longer, if you want to burn, it is best to use the disk of ***-r, PS2 has very good support for -R, and it is also not recommended to use a repeatable burning disc RW, so to solve the above two aspects, if there is still a problem, you must check whether the bald head of your machine is aging, or whether the ** file is missing or whether it cannot be used at all.
Hope it helps.
-
First of all, make sure that ** is the image file of the PS2 game, which is generally named ISO or BinThen open Nero or other burning software, put a blank disc in the *** recorder (put in the CD or *** burning disc according to the actual situation), and then select it in Nero"Engrave the image onto a disc", and then select the image file you want to burn, and select 4 speed for burning speed (24 speed if it is a CD).Next, you can engrave the disk, generally only 10-20 minutes, a PS2 game disk is engraved.
PS2 is more picky, so the quality of the burning disc must be good, and it is recommended that Mitsubishi's *** burning disc and Weibao's CD burning disc are recommended. All my PS2 burning disks are engraved with these two brands of disks, and there is no problem reading it (70007 machine), *** also uses +r disks. In addition, there are many fake Sony burning disks on the market, and you may not be able to buy authentic ones (the bulk Sony burning disks in regular stores cost 6-7 yuan a piece).
You can select the option to check after engraving the disk when you engrave the disk and see if there are any errors.
-
The genuine disc produced by the game manufacturer is the pressure disk technology, the pirated disk is also the pressure disk technology, there is no difference in the technology itself, the early pirated games are also very playable, and it will not be broken for a long time, but similar to the "post-PS1 era" PS1 disk quality has plunged sharply, and now the quality of the "post-PS2 era" pirated pressure plate is very bad, and it is likely that you can't read out of 10 out of 10. Therefore, the engraved disc can replace the pressure plate, and now the first is basically sold on the engraved plate, if you use Weibao or Mitsubishi engraved disc is also very good quality, but no matter how good the carved disc is not as good as the good pressure plate. Here's a formula for you:
Good platen > good platen > bad platen > bad platen.
So don't buy a bad burner, such as an unknown *** burner.
The technology of the pressure disc is that useless data will be randomly written in the disk, so that the game is evenly distributed between the inner circle and the outer circle of the disc, which is very protective of the bald head.
The engraved disc writes data sequentially from the inner circle to the outer circle, so that the bald head will always read back and forth in several parts of the inner circle, which is not very good for the bald head.
Most of my games now are old presses, with a few Wibel carvings. The bad plates are thrown away.
-
Let's put it this way. For the same quality disc, the pressure plate has less damage to the bald head than the engraved disc. But now the quality of the color pressure plate on the market is quite bad, buy back a lot of can not read, this pressure plate chassis material is very poor, the damage to the bald head is also relatively large.
Therefore, relatively speaking, the current *** burning disc is a little better than the pressure disc bought outside. **There are PS2 disks that sell Wei Bao disk burning on the Internet, 5 yuan a piece, the quality is very good, I have bought more than 30 copies so far can read normally.
I have been using the engraved disc for almost 2 years, and I also had such doubts as you at the beginning, so now I am very responsible to tell you, not only will it not hurt the service life of the machine, but also the service life of the engraved disc is stronger than the pressure plate. You must know that the quality of the pressure plate has been getting worse and worse for a long time, so at that time some people carved the plate and played it themselves. And no matter how you say it, the engraved plate is better than the pressure plate***, you can rest assured that you can play well.
Daningci's lower o seems to be an empty palm, right? It's really hard to get close with infinite CKL. >>>More
Don't listen to people's nonsense, the bald head of PS2 is still quite leathery, and my 3W is still in service. >>>More
1. Dobby worships Harry and hopes he can defeat Voldemort. >>>More
Genuine games need to pay Sony a royalty for developing the game (you need to give Sony some money to develop and publish the game on PS2), the game developer has to pay a salary, the game needs money to use various new technology related equipment, the factory needs money to make game CDs, the game has to be advertised and there are advertising fees, and the company has to pay taxes, etc. This is all the production cost, so the genuine game is high. Piracy does not have the above problems, only the cost of a disk (about 1 yuan). >>>More