Is it practical to make flower pots for drink bottles? How to make a flower pot from a plastic bottl

I think it's very practical to make flower pots from beverage bottles, which is equivalent to waste recycling

I think the drink bottle is very delicate and looks very creative.

Practical, a little modification, not only to achieve waste utilization, but also environmental protection.

It's good, drink bottles are thrown away and wasted, and they can be reused.

The larger ones are more practical, and the smaller ones can be raised and cuttings.

Plastic bottles are a good kind of flower pots, which are not environmentally friendly, and can be DIY to add fun and a sense of accomplishment. Beautify flower pots, cut plastic bottles into their favorite shapes, paint colors and draw pictures, and put them on ordinary flower pots to beautify potted plants. Hydroponic flowers, the large cola bottle is cut from the middle, a hole is pierced at the cap, the upper part of the bottle is inserted into the bottom bottle face down, the hole in the cap is passed through a cotton thread, the upper part of the bottle is filled with a substrate, the cotton thread is wrapped in the substrate, and the lower part is filled with water, and the water is sucked into the substrate through the cotton thread.

The drink bottles that can be found everywhere in the house can also be used as flower pots, which is quite practical. Small to mineral water bottles, large to cola bottles, beverage pots, empty oil barrels can all be raised flowers, simply deal with it, cut off the upper part, and make a few small holes below, which is a small flower pot. Small to mineral water bottles, large to cola bottles, beverage pots, empty oil barrels can all be raised flowers, simply deal with it, cut off the upper part, and make a few small holes below, which is a small flower pot.

As long as we find out with our hearts. Plastic bottles play a very big role in raising flowers, and they are also very fun. Beverage bottles can also be used to cut plants.

Cut a beverage bottle with vermiculite cuttings, drill a hole in the bottom, and insert the plant into a plastic bottle. Place a tray at the bottom and fill it with water. If you put it in a place where the light is scattered, it will take about a month or so for the cuttings to take root.

It can also be used to stuff meat. For example, Gyokuro, which we raise at home, is shriveled and fastened with a small plastic bottle. It plays the role of heat preservation and moisturizing, and quickly raises the gyokuro crystal clear.

Beverage bottles to make vases, economical, is very practical, not only waste utilization, if pruned well, but also to make creative vases, but also to exercise hands-on ability, why not. Of course, you don't have to be tall and classy. If you like, you can make some drink bottles and vases by yourself.

Friends who like to raise flowers, with more and more expenses at home. I also like to try to grow flowers in various containers. For example, use empty oil cans, beverage bottles, wine bottles, foam boxes, laundry buckets, etc., simple cutting, drilling holes into a beautiful flower pot.

Of course, you can use it, because my dad at home is very fond of raising flowers, and we have a lot of flower pots made of unused plastic bottles, which I look very good-looking. Use a variety of plastic bottles to make your favorite flower pots, then make shapes and plant flowers. Not only are the flowers and plants beautiful, but the pots are also very individual.

Use empty oil drums to grow flowers and vegetables. The empty oil drum is relatively large, so it is more cost-effective to use it to grow vegetables. It can be cut horizontally or vertically.

Plant a few more greens and line them up so that they are lined up. It's just a small family-style vegetable garden. A variety of bottles are simply cut and drilled, and the patterns on the bottles are mixed with different colors.

It has become a very beautiful and beautiful flower pot. You can raise succulents, panjing and other small plants. Not only waste utilization, but also increase the interest of life.

Beverage bottles can be used as flower pots, seedling pots, and cuttings humidors. It is very easy to use, especially the transparent or translucent bottle, which can not only intuitively see the root system but also meet the requirements of scattered light for seedlings or cuttings. (I would like to dedicate this article to the simple and thrifty flower raisers, please ignore the local tyrants and nouveau riche) I like to collect and drink the mineral water bottles, take the cuttings in the moon season, even in high temperature and dry days, the cuttings can be lived, and the big white root is long.

Beverage bottles can not only be used to grow flowers, but also can be used for cuttings, which is the treasure of some flower keepers. The last thing a flower farmer can't throw away is some plastic bottles. Cut the plastic bottle without cutting it in the middle, and then put some cuttings at the bottom.

You can put a plastic plate on it and fasten the upper plastic bottle. In this way, the place where the light is scattered, and the mouth of the bottle is opened for ventilation. In this way, it can moisturize and keep the plants warm, and it is used to cut plants, and the survival rate is very high.

Flower pots are actually fixed to the soil, as long as the drainage is good, it doesn't matter what you use, and it is actually very good to use a drink bottle, and it is also environmentally friendly. We use a lot of beverage bottles to make flower pots at home, just like our pothos is a bottle of mineral water that is used directly. For example, succulent or small-sized grass flowers, general mineral water bottles or 2-liter bottles can be, but if you plant large ones, such as Yueji, small hibiscus, etc., it is best to use a larger volume, otherwise the imagination is very beautiful, and the actual planting is not good, because the bottle is too small and difficult to raise.

In the planting season, flower friends often use oil drums, which are generally 2 gallon pot sizes, and are resistant to aging, and are known as the artifact of planting flowers. A few years ago, when netizens studied the cuttings technology together, the wall had not yet appeared at that time, and the best way was to use the carbon cuttings of oil drums and rice husks.

How to make flower pots from plastic bottles:

1. Prepare materials.

1) a number of 2-liter large Coke bottles;

2) Wooden strips, bamboo poles, PVC pipes or other things that can be made into frames;

3) Wood screws.

2. Tools. 1) Knife for cutting bottles;

2) Drilling machine or hand drilling, punching holes at the bottle mouth for fixing;

3) Screwdriver;

4) Saw, trimming wooden strips 3, cut the plastic bottle only cut off the upper part of the bottle.

3. Make a hole at the mouth of the bottle;

4. Make a bracket to make a two-layer frame, and it should be noted that the large mouth of the bottle can catch the mouth of the upper bottle;

5. Fix the bottle with screws to fix the bottle to the frame;

6. Loading soil planting Watering put a stone at the mouth of each bottle, and then load the soil. Plant the seeds of the plant and keep irrigated.

Coke bottle from the middle.

Cut off the lid of the bottle mouth.

Tie a few. Small eyes, put the lower half downward, put the top soil.

Flower pots, on a business trip.

Put the bottom half inside.

With water, you can do it for a long time without watering.

Make a flower pot out of a drink bottle as follows:

2. Twist the cap off.

3. Drill a hole in the twisted cap.

<>5. Take out the prepared hemp rope for later use.

6. Thread the hemp rope through the hole in the bottle cap.

7. Twist the cap of the hemp rope back to the mouth of the bottle.

<>9. Fill the bottom half of the bottle with an appropriate amount of water.

<>11. Then fill the upper part with soil, and pay attention to exposing the hemp rope outside.

<>13. At this time, you can put in the flowers to be planted. Shelter.

<>15. Then fill the pot with soil until the hemp rope is covered.

16. Water the flowers with some water, let the hemp rope in the soil be soaked, and the flower pot transformed by the Sprite bottle will be ready, and the hemp rope below can use the principle of siphon to automatically absorb water, saving the work of watering the flowers.

Preparation materials: plastic bottles, self-spraying paint, knives, hemp rope, iron wire.

1. First of all, prepare a plastic bottle and a bottle of self-spraying paint;

2. Use a knife to cut the plastic bottle into the above shapes;

3. Then spray the color with self-spraying paint;

4. Use iron wire to pierce a hole in the top of the bottle cap;

5. Thread the hemp rope into it;

6. The bottle cap is capped on the plastic bottle;

7. Finally, put in the flowers and plants that need to be planted.

Prepare tools: Before using bottles to make flower pots, prepare plastic bottles, scissors, and other tools. Design styling:

Draw a marking line or pattern on the plastic bottle and trim it with scissors. How to use: Lay the soil in a cut plastic bottle and plant it for maintenance.

Precautions: Be sure to clean and disinfect before use.

1. Prepare tools

Before using a bottle to make a flower pot, you need to prepare tools, 1 or more plastic bottles of suitable size, scissors, nails, paintbrushes, etc., choose plastic bottles according to the size of the plants you want to plant, the common ones are mineral water bottles, laundry detergent bottles, plastic buckets, etc.

2. Design modeling

Remove the label on the plastic bottle, dispose of it cleanly, use a paintbrush to draw a marking line or desired shape on the plastic bottle, assist in pruning, avoid affecting the beauty of the pot when cutting, and choose whether to use a nail to punch a breathing hole at the bottom according to the type of plant.

3. How to use

After making a simple flower pot in a plastic bottle, you can put in the prepared nutrient soil, plant the plant and water it, and put it in a sunny position or a semi-shaded position to maintain, this kind of flower pot is very suitable for planting shallow root flowers, green plants, vegetables and other plants.

4. Precautions

Plastic bottle flower pots must be cleaned before use, and disinfected and sterilized before they can be used as flower pots, it is best to use transparent plastic bottles, which can not only observe the growth of the root system, but also help the sun to irradiate the root system and avoid the occurrence of rotten roots.

Here's how to make a vase out of a bottle:

Plastic is actually a very good container, in the hole line its heat preservation and water retention are better, and not easy to deform, so it has been used for a long time, and it is very suitable for making flower pots. You can cut a few knives directly on the upper part of the bottle, leaving the lower third of the container, and then cut off the two symmetrical pieces on the left and right, leaving the mouth of the bottle and the two connected parts, so that it becomes the shape of a hanging basket vase.

If you don't want to cut it too much, you can cut off the upper part directly, and then drill three holes evenly around the edge of the bottle, and put on a rope to hang it. The bottom of the bottle should also drill a few small holes, and you can raise flowers with soil, especially suitable for raising some vines or succulents, and it will grow very quickly when hanging in a well-lit place.