What are the auxiliary materials used in solid wood furniture?

Since ancient times, red sandalwood has been considered the most valuable wood, its texture is solid, and the generation rate is slow, whether it is raw materials or furniture materials, it is difficult to exceed a foot. Therefore, most of the furniture is made of several pieces of tenon, if you buy solid wood furniture.

It is best to buy offline, the main reasons are as follows, look at the material, the height of solid wood furniture ** is mainly wood species, pine, cypress, walnut.

Beech wood, all kinds of wood have different advantages and disadvantages, ** is different, can you see what material online? For example, a solid wood bed with a bed frame of red oak and a slatted frame of pine wood is usually pine.

In this case, the merchant called solid wood, is not to deceive consumption, the main reason is because of the different characteristics of wood, red oak wood is hard, as a frame is more stable, when buying furniture for the baby should be multiple combinations, can not buy fixed or ** very high furniture, and these furniture is best not equipped with glass decoration, so as not to hurt the baby.

<> how to choose furniture, in fact, the furniture has seen more, there will be a feeling of how to choose furniture invisibly, you can go to the furniture store to see, but the furniture store is single and not in one place, or it is more convenient to visit the home fair, solid wood is very extensive, the general user does not need to delve into it, in general, it can be divided into several categories: miscellaneous wood; Annatto; Standard wood for baking wood and joinery furniture. In fact, the only hardwoods of traditional wood are red sandalwood, yellow pear, and red acid branches.

Old Tiriwood, Old Wenge.

Old rosewood. Due to the short timber growth time of fir wood, the wood is soft and has a certain toughness, which will be slightly lower than other solid woods. Pine wood is heavier oily, denser than fir wood, and the hardness is relatively larger, but the deformation resistance is not as good as that of fir wood.

Oak furniture is not well maintained, cherry wood.

The main production area is the eastern part of the United States, which is suitable for making high-end cabinet wardrobe panels, characterized by delicate texture, clear, good polishing effect, and good lacquered surface effect. The disadvantage is that the shrinkage is serious when drying, and the advantage is that it is very stable after drying and is not easy to deform.

Auxiliary materials mainly include: plates, keels, cement, sand, bricks, waterproof materials, plumbing fittings, wires, putty, etc. Among them, the board is divided into large core board, gypsum board, MDF, polyammonia board, sauna board, etc.

Auxiliary materials include: cement, yellow sand, red bricks, water pipes, wires, network cables, switch panels, gypsum boards, woodworking boards, plug-in boards, nine-centimeter boards, plywood and other boards, latex paint, caulk, tape, small hardware (nails, screws, etc.) and so on.

There are many factors that affect multi-layer solid wood panels**. And there are many aspects to consider in addition to **. It is recommended to learn about Shenzhen Xilin Decorative Materials Science and Technology, and there should be some gains.

Shenzhen Xilin Decorative Materials Technology Co., Ltd. has been focusing on the ecological board industry for many years, with modern standard workshops and fully automatic production equipment, a huge technical and customer service team to provide customers with 24-hour service, one-to-one response to customer needs, antibacterial, anti-ant, waterproof, acid and alkali resistance, anti-pollution and easy to clean. If you want to know more, please call us and look forward to cooperating with you!

There are many types of furniture decoration boards, and the following is a detailed introduction to some common boards:

1.Solid wood plank: Solid wood plank is a natural wood with good environmental performance, but ** high. Solid wood panels include logs, solid wood finger jointed boards, solid wood splicing boards, etc.

2.Solid wood veneer: Solid wood veneer is to paste solid wood veneer on the base material of wood-based board, and make the board have the texture of solid wood through veneer treatment. Common solid wood veneers include solid wood multi-layer boards and solid wood particle boards.

3.Medium density fiberboard: It is a kind of man-made board made of wood chips, wood chips and other raw materials through drying, crushing, bonding, hot pressing and other processes. It has good processing performance, stability and environmental performance.

4.High-density fiberboard: It is a high-density man-made board, and the main raw materials are wood fiber and resin. It has good mechanical properties, stability and processing properties.

5.Particleboard: Particleboard is a man-made board made by cutting wood into pieces of a certain specification through drying, sizing, paving, hot pressing and other processes. Particleboard has good mechanical properties, stability and processing properties, but poor environmental performance.

6.Gypsum board: Gypsum board is a lightweight board made of gypsum as the main raw material and added fibers, adhesives and other materials. Gypsum board has good thermal insulation, sound insulation and fire resistance, and is often used in ceilings, partition walls and other parts.

7.Aluminum gusset: Aluminum gusset is a kind of plate with aluminum alloy as the base material and the surface is treated by anodizing, spraying and other processes. Aluminum gusset has good decorative effect, waterproof and anti-corrosion performance, and is often used in kitchens, bathrooms, ceilings and other parts.

8.PVC board: PVC board is made of polyvinyl chloride (PVC) as the main raw material, adding fillers, plasticizers, stabilizers, etc. PVC sheet has good waterproof and anti-corrosion properties, and is often used in kitchens, bathrooms, ceilings and other parts.

9.Fireproof board: Fireproof board is a kind of man-made board with fireproof treatment on the surface, which has good fire resistance. Fireproof board is often used in kitchens, bathrooms, furniture and other parts.

10.Melamine board: Melamine board is a kind of man-made board with a surface treated with melamine impregnated paper veneer. Melamine board has good wear resistance, scratch resistance, and high temperature resistance, and is often used in furniture, cabinets and other parts.

A lot of people are rightSolid wood furnitureBut in order to truly understand solid wood furniture, you first need to have a comprehensive understanding of the concept and classification of solid wood furniture. So what is solid wood furniture? What are the classifications of solid wood furniture?

Let's follow us to find out.

What is Solid Wood Furniture?

Solid wood furniture refers to furniture made of solid wood. The common materials of general solid wood furniture are beech, teak, maple, oak, red toon, ash, elm, poplar, pine, etc., among which beech, teak, and red toon are the most precious. The current development situation of China's solid wood furniture industry is good, and the Zhiyan Data Research Center shows that with the continuous expansion of China's solid wood furniture industry operation market, the operation of China's solid wood furniture industry will usher in a new development opportunity.

What are the classifications of solid wood furniture?

According to the national standard "GBT3324-2008 General Technical Conditions for Wood Furniture", solid wood home has two classification standards: "solid wood timber proportion and process" and "solid wood attributes".

Solid wood furniture classification 1, according to the proportion of materials and technology:

1) All solid wood furniture: All solid wood furniture refers to furniture made of solid wood sawn timber or solid wood planks for all wooden parts (except mirror supporting plates and pressing strips).

2) Solid wood furniture: Solid wood furniture refers to furniture made of solid wood sawn timber or solid wood planks as the base material, and there is no covering treatment on the surface.

3) Solid wood veneer furniture: Solid wood veneer furniture refers to furniture made of solid wood sawn timber or solid wood planks as the base material, and covered with solid wood veneer or thin wood (veneer) on the surface.

Solid wood furniture classification 2, according to the properties of solid wood:

1) Solid wood sawn wood furniture: The national standard stipulates that solid wood sawn wood furniture, also known as natural solid wood furniture, refers to furniture made of solid wood sawn timber as the base material. Zhixi Hongqing can be called natural solid wood furniture, because solid wood sawn timber is a material that is directly sawn into the specifications required to make furniture from logs, and after drying.

2) Solid wood panel furniture: Solid wood panel furniture is furniture made of solid wood board as the base material. Solid wood planks refer to solid wood materials formed by secondary processing of wood such as joints and laminated timbers.

Solid wood is a solid wood material formed by secondary processing, in terms of value, solid wood sawn wood furniture material selection requirements are higher, the yield is lower, and the production cost is much higher than that of solid wood before the board furniture, which will be more expensive.

The above is what is solid wood furniture for you? What are the classifications of solid wood furniture? All of it.

1. Natural, environmentally friendly and healthy solid wood furniture reveals the beauty of nature and primitiveness. The reason why solid wood furniture has been prosperous for a long time, from the color analysis, lies in its natural wood color. Wood-coloured furniture is both natural and chemical-free, which is a healthy fashion choice that meets the psychological needs of modern urbanites who worship nature.

Secondly, in the choice of materials, taking domestic solid wood furniture as an example, the main types are: beech, teak, maple, oak, oak, ash, elm, poplar, pine, etc., among which ash, beech, oak are the most precious. These materials come from nature, reflecting the harmonious relationship between people and the environment, designers love to use these materials, and then add people-oriented, nature-oriented modern design concepts, it can be closer to people and materials, people and nature, giving people a sense of intimacy.

Again, environmentally friendly decoration solid wood furniture is the protagonist of the market. In the process of processing and making solid wood furniture, compared with those wood-based panel furniture, the amount of glue used is quite small. The amount of glue used affects the environmental protection of furniture.

2. Long service life. The service life of panel furniture is generally 3-5 years. The service life of solid wood furniture is more than 5 times that of panel furniture.

3. Solid wood home has the function of value preservation. At the same time, it can bring warm "wood gas" to the home environment, so it is quite popular with middle and high-end consumers. Its advantage is that it embodies nature: natural textures, changeable shapes, and beautiful patterns of wood can generally be seen on the surface of furniture.

4. Solid wood furniture has its own unique style personality Solid wood furniture raw materials come from nature, set the essence of nature in one, and truly show the unique taste of real wood furniture: high-end, heavy, combining the long-standing traditional Chinese culture with modern fashion factors, integrating into the design of furniture, giving new connotations to furniture, making furniture design more humane, practical and modern, creating a new fashion of solid wood furniture, and leading the new trend of furniture.

Solid wood furniture materials, boards and other composite panels, man-made panels are fundamentally different, solid wood materials are durable, the material is strong, the suction force of the nails is strong, it is incomparable to other boards, the method of identification, the solid wood plank tree grain is irregular, the size of the knots, the shape, the arrangement is irregular, the artificial board, the same texture, the knots can be found elsewhere, it is a replica, the cross-section is very different from the surface.

The raw materials of solid wood furniture are as follows:

1. Pine. Pine is a coniferous plant, pine itself has a pine fragrance, the wood color is pale yellow, it reacts quickly to atmospheric temperature, and it is easy to swell.

2. Oak. Oak wood has a relatively obvious mountain wood grain, and its surface texture is good when touched, which is suitable for high-end European furniture.

3. Beech. Beech wood is a solid wood furniture raw material often used by domestic furniture manufacturers.

4. Elm. Elm wood is tough, the problem is clear, the hardness and strength are moderate, the general openwork relief can be adapted, the planing surface is smooth, and the chord pattern is beautiful.

Kiss! Hello, happy to answer your <>

Pro-non-solid wood furniture is called "wood-based panel" furniture, not a wooden board, pasted with a layer of wood wheels with a thickness of a few tenths of a millimeter, pressed into the particleboard, there are many tung burning board furniture, refers to furniture made of wood. It is divided into solid wood, solid wood composite and MDF. The skin of the solid wood composite is solid wood, not in the middle (is it sawdust or whatever).

MDF is made of pure wood chips or others. or PVC pattern leather. Right now.

It can't be called solid wood furniture, it's sawdust. This board solid wood furniture, MDF, some contain formaldehyde (in glue), sawdust. The main material and auxiliary materials are not all wood, and the main material of the home is red oak imported from North America

Multi-layer boards, as well as pine wood, many people now like to customize furniture at home, so there are more types of boards, so what kind of material is wood-based panel? There are many types of wood-based panels, including MDF, particleboard, plywood, etc. For example, MDF is cut into slices from the branches of trees, ground into fibers by a hot grinder, and then hot-pressed into a board.

The principle of particleboard is similar to that of MDF, but it is made by turning the wood into shavings and then hot pressing it. Plywood is made by spin-cutting wood into pieces of veneer, which are then glued together and then hot-pressed. Hope mine can help you <>

Do you have any other questions?

What are the categories of furniture materials according to their use? Hello, I am happy to answer for you<> pro-material is the material basis that constitutes furniture, and each piece of furniture is made of various materials through certain structural technologies. According to the use of materials in furniture production, they can generally be divided into three categories: structural materials, decorative materials and auxiliary materials.

Commonly used furniture structural materials include wood, rattan, stone, etc. Stone is applied to the stone on the furniture, generally there are two kinds of natural stone and human carved stone. After the natural stone is sawn into thin plates and polished smoothly, it can be inlaid on tables, cabinets and other furniture, which has a good decorative effect.

Natural stone is non-combustible, non-rotten, pressure-resistant, water-resistant, wear-resistant, rich and natural, rough and strong texture, free and changeable texture, and the shortcomings are fragile, not sold for heat preservation, not sound absorption and difficult to process and repair. Common natural stones include granite and marble, etc., and the quality of natural stone from different origins will be quite different. Extended material: I hope mine can help you <>

Do you have any other questions?