Is it better to have an overcounter basin or an undercounter basin? It is better to decorate the bas

The differences between countertop basins and undercounter basins are as follows:1. Because the countertop basin is easy to install, rich in shape and good in shape, the countertop basin is usually used in the family.

2. The installation of the undercounter basin is more troublesome than the countertop basin, the requirements are relatively high, and the shape is relatively simple, but it is easier to take care of. Therefore, undercounter basins are often used in public places to facilitate maintenance.

3. The undercounter basin is easy to use, and water and other sundries can be directly wiped into the sink, but the sink cannot be replaced in the future, and the maintenance is troublesome.

4. There is a little inconvenience in the use of the countertop basin, and the sundries cannot be directly wiped into the sink.

The suggestion is to choose an undercounter basin, after all, the most important thing for a kitchen is to be easy to clean, and the shortcomings of the poor load-bearing capacity of the undercounter basin can also be improved.

The Taichung basin is a pruning accompaniment that polishes the countertop to remove a layer, and then makes the sink and countertop into a flat plan.

There is no sanitary dead angle in Taichung basin and it has strong stability. Taichung basins also have disadvantages, the first is that it is difficult to install. The Taichung basin needs to be opened and polished, which requires high skill from the installer.

The second disadvantage is that it is high, and the installation of the basin can be said to be the highest charge among the three ways.

The undercounter basin is the sink where the countertop is completely installed under the countertop, the edge of this sink is lower than the kitchen countertop, and the edge of the undercounter basin is below the countertop, which can directly wipe the dregs on the countertop into the sink, without sanitary dead ends, reducing the amount of housework. There is no exposed glass glue in the undercounter basin, which is naturally more beautiful.

I think the only disadvantage of the undercounter basin is that the load-bearing effect is not good, the stress point of the countertop basin is only the position of the surrounding position, and the load-bearing effect is far inferior to the countertop basin and the countertop basin. However, this can be improved, as long as the installation is reinforced and the material is lightweight.

How to reinforce the undercounter basin:

1. Conventional fixation method. The conventional way of fixing is to use stone bars to fix it. For example, if we are a quartz countertop, then we will use quartz stone strips.

In the undercounter basin, the stone strips are used to reinforce, and the method used is to apply glue on the stone strips and then paste them under our countertop.

In fact, it is to use stone strips to increase the fixation between the sink and the countertop. Like this time, it is generally fixed with a zigzag stone strip, and four fixed points are generally added. If we choose a very good glue, the fixation with stone strips is basically very strong.

2. Fix it with a metal bracket. Metal brackets are fixed, and there are still more of them. The method is that after we have installed the entire sink, we will install the metal bracket according to the position where we have installed the sink.

There are two kinds of horizontal brackets like the metal brackets that are commonly used at present: the first one is the L-shaped, or the seven-shaped bracket.

Generally, this kind of bracket should be fixed with two on the side panels, and then the sink should be dragged at the bottom. In addition, there are also slotted metal brackets, which are also fixed on both sides and rely on the bottom to drag the sink. In addition, there is now a metal bracket for remediation, which is installed vertically.

That is, it is fixed directly to the ground, and then the upper part is pressed against the bottom of the sink.

Both undercounter basins and countertop basins have their advantages and disadvantages, and there is no better way to choose one according to your needs.

1. Advantages and disadvantages of countertop basins

Advantages: Because the diameter of the basin mouth is larger than the hole dug on the countertop, it is equivalent to resting directly on the countertop. When installing, you only need to put silicone on the joint between the basin and the countertop, which is more convenient for construction.

And the decoration effect is ideal. When washing your hands, the water does not easily splash out of the basin.

Disadvantages: The cleaning aspect of the countertop basin is relatively average, and because it is relatively high, it is not suitable for children.

2. Advantages and disadvantages of undercounter basins

Advantages: The advantage of the undercounter basin is that it will not damage the flatness of the countertop when used, and it is more convenient to clean and bury. In the visual effect, the undercounter basin will also be more modern and loved by people.

Disadvantages: Compared with the countertop basin, the undercounter basin will be more expensive, and the installation will be complicated. If the undercounter basin is broken, it is impossible to separate the undercounter basin from the countertop, and it can only be replaced together with the countertop.

Precautions for basin installation

1. Pay attention to the height

When installing a handwashing station, the distance between the countertop and the floor should be kept at 80 cm, regardless of the type of handwashing station chosen. It is easy to have backache during use, but the specific height of the handwashing station should be determined with reference to the height of the user, so that it is easy to use.

2. The depth of the basin

Splashing with water during use can be uncomfortable, so consider whether the depth of the basin is proportional to the flow rate of the faucet when installing a sink. For example, a faucet with a fast flow rate should be installed in a deep basin, and if a faucet with a fast flow rate is installed in a shallow basin, it is easy to splash water. In addition, the basin has a certain arc, so it is smoother to use.

3. Basin selection

The edge of the washbasin should be higher than the countertop, but the area where it joins the countertop should be smooth, so that the occupants can easily take care of it and wipe the spilled water back into the basin. At the same time, regarding the selection of the basin, you should choose a product with high surface smoothness, of course, its own finish is also very important, which is not conducive to stains adhering to the basin, and cleaning is more convenient.

Undercounter basin is good.

The undercounter basin is easier to take care of than the countertop and the countertop basin, and the water, rice residue and other stains on the countertop can be directly wiped into the basin, there is no problem of accumulating bacteria, and it is more clean and hygienic. Moreover, the undercounter basin and countertop look one, presenting a neat and beautiful effect.

Disadvantages of undercounter basins

The installation process is complex, and the later maintenance is more troublesome, because its load-bearing capacity is weaker than that of the countertop basin, and the joints are easy to age and fall off after long-term use, and the gaps will be prone to bacteria, mildew and blackening, which increases the difficulty of cleaning.

What are the precautions for kitchen sink installation

1. After the installation of the sink, the drainage test should be done, the sink should be filled with water, and the drainage of the sewer and overflow hole should be tested at the same time. If there is water seepage when draining, it should be reworked immediately. After the drainage test, to make sure that there are no problems, the sink can be edge-banded.

When using silicone edge sealing, it is necessary to ensure that the connection gap between the sink and the countertop is even, and there can be no water seepage.

2. When installing, the position of the table top should be consistent with the volume of the sink, and after putting it into the countertop, it is necessary to install the matching hanging piece between the tank body and the table.

3. When installing bellows and braided pipes, we must pay attention to the size of the tightening force, too much force is easy to damage the thread, and too little force may leak due to insufficient sealing.

01 Countertop basin.

Countertop washbasins are the default installation method for cabinets. Its mouth diameter is larger than the opening of the countertop, and it can be fixed directly on the countertop glass glue when installed, if it is broken, the glass glue can be removed, and it can be picked up directly from the countertop.

Advantages: The countertop basin is easy to install, and it is also convenient to repair after problems in the later stage; The space under the sink can be about 3 cm higher than the undercounter basin.

Disadvantages: It is inconvenient to take care of in the later stage, the position of the contact between the sink side and the countertop is closed with glass glue, and the glass glue is easy to mold, blacken, warped corners of the sink, and leaks into the cabinet along the gap.

02 Taizhong Basin.

The Taichung basin is also called flush type, according to the size of the sink installation side, polish a layer on the countertop of the cabinet, and use the sink and countertop as a plane.

Advantages: This installation method is beautiful, and the sink is flush with the countertop, which is relatively easy to clean.

Disadvantages: The installation process of the basin is more complex, and the cost of platform grinding is more; The gap between the sink and the platform is still a dead corner, which is easy to leave rice residue stains, etc., breeding bacteria, and is not easy to clean.

03 undercounter basin.

Advantages: The undercounter basin is easy to take care of, easy to clean, and it looks like it is integrated with the countertop, which is simple, beautiful and generous.

Disadvantages: Relatively speaking, the installation of the undercounter basin is more troublesome, and the sink needs to be installed under the countertop, and the inner edge of the countertop and the sink is opened with a hole of the same size, and the gap is bonded with adhesive. The additional cost will also be more expensive than countertop basins, which are similar to those in Taichung.

About load-bearing. In general, the overcounter basin and the Taichung basin are more important than the undercounter basin, and some people question the load-bearing capacity of the undercounter basin.

However, generally speaking, the sink does not need to put many things, and simply washing dishes, vegetables, and fruits, and load-bearing is definitely not a problem.

Personally, it is best to install an undercounter basin in the kitchen, which is easy to clean and there is no mold in the gaps.

fromIn terms of aesthetics and ease of cleaning, it is better to have an undercounter basin

The advantage of the undercounter basin is that it will not destroy the flatness of the countertop when used, it is more convenient to clean, and the visual effect is more modern.

The inner edge of the undercounter basin is consistent with the size of the hole opened on the countertop, the undercounter basin in order to fit with the countertop, the part that is in contact with the countertop must be integrated with the countertop, and it is necessary to bond with a special adhesive, and the bonding strength is high, so the construction difficulty is greater, if the undercounter basin is broken, it is impossible to separate the undercounter basin from the countertop, and can only be replaced together with the countertop.

The countertop basin is inconvenient to take care of in the later stage, and the position of the sink edge and the countertop contact is closed with glass glue, and the glass glue is easy to mold, blacken, and the sink is warped, and leaks into the cabinet along the gap.

When buying a washbasin, the first thing to consider is the installation environment. When the installation space is less than 70 cm, it is recommended to choose a column basin, and a space greater than 70 cm is good for installing a countertop basin or an undercounter basin. Because when it is less than 70 cm, there is a small variety of products to choose from, and it will look oppressive and cramped after installation.

The choice of wash basin

1. Look at the size of the space. In general, it is not recommended to choose a countertop basin when installing in a space with a width of less than 70 cm, because there are few types to choose from at this time, and the installation effect is poor.

2. Consider the location of water supply and drainage pipes. On the premise of minimizing the alteration of water pipes, choose the appropriate basin type.

3. Faucet height. Especially when choosing a freestanding countertop basin, it is necessary to cooperate with the faucet of the corresponding height, and the faucet is too low to affect the use of the basin.

4. Before purchasing, you must consider the location of the water supply and drainage pipes at home, refer to the space environment around the water supply and drainage pipes, and match the basin. The installation of the undercounter basin is more difficult than the countertop basin, and it is very suitable for the countertop.

Is it better to have an overcounter basin or an undercounter basin? The renovation team won't tell you about the advantages of countertop basins.

1. Sanitation and cleaning.

From this corner. From the point of view of dudu, it must be that the undercounter basin is more practical than zhi, because the water on the countertop can be directly wiped into the basin. And back to the countertop basin, except.

Answer: The square basin is square, and the others are all large and small styles, and the combination of the bottom and the countertop is easy to become a sanitary dead end.

2. Installation and maintenance.

It is inevitable that there will be some small problems after living in the house for a long time, and we don't need to invite workers to come to the door for simple maintenance, and we can also save some expenses. Compared to the two types of basins, the undercounter basin is obviously more difficult, because it needs to reserve a hole in the countertop first, and then it needs to be glued together, taking into account the weight of the basin and the weight underneath.

In terms of maintenance, it is also more troublesome to have an undercounter basin, because it is connected by glue, and there is no way to separate it from the glue if you want to replace or repair, so you can only replace it with a countertop.

Of course, there are also maintenance problems with the countertop basin, but it is relatively simpler, and its problem is that the glass glue at the bottom will become black and seep, and it needs to be replaced by itself.

3. Use and beauty.

In terms of use, because the countertop basin itself has a certain height, if the bathroom cabinet is relatively high, adding a countertop basin may be inconvenient to wash, especially for children.

In terms of aesthetics, both have their own merits. The undercounter basin is integrated with the countertop, which is more stylish and simple. There are a variety of styles of countertop basins, which can better meet different decoration styles, and a good choice can also add color to the bathroom.

If you are looking for style, it is best to choose a countertop basin. If you have children at home and want to clean conveniently, you can choose an undercounter basin.

Both have their own pros and cons, which can be chosen according to your needs. Zhi basin is a more common way to install a water basin, it version is to embed the basin on the surface of the table, and then glue around it.

1. In the process of use, because the water on the countertop often penetrates into the glue, the glue will open after a long time.

2. The countertop basin has a sanitary dead corner that is not easy to clean.

3. After being used for a long time, the surrounding glass glue is easy to turn yellow, which affects the appearance.

4. The countertop basin is easy to install and easy to maintain in the future.

The undercounter basin is embedded in the countertop, which is the best installed, the most aesthetically pleasing, and easier to clean.

1. It is easy to use, because the edge of the basin is lower than the countertop, so that the water on the countertop will automatically flow into the basin and will not let the water flow everywhere.

2. The undercounter basin is not easy to leak and easy to take care of.

3. The undercounter basin is embedded in the countertop, which has a better and more beautiful overall effect with the cabinet.

4. The requirements for grinding on the four sides of the undercounter basin are very high, and professional technicians are generally required to operate.

5. The use of undercounter basins requires additional production and processing costs.

Undercounter basin disadvantages:

1. The construction process is difficult, and it is generally required to send the basin to the cabinet factory and do it directly.

2. The size of the opening is large, and the small kitchen should be carefully considered.

3. The bearing capacity is worse than that of the basin on the countertop, which is prone to after-sales problems.