How to deal with the place of the door cover? Do you want to scrape putty and paint latex?

Door casing. In fact, there is no need to scrape putty.

and brush latex paint.

Because there is no need for this, if it is a humid place, the putty will be moldy and bulging after a long time! But when installing the door casing, the position of the door casing to be installed on both sides of the door opening and the top must be trimmed and corrected, and the position is kept flat and vertical. At the same time, when measuring the size, it is necessary to connect with the workers and masters of technical decoration.

The worker measures the size, and when measuring the size, the verticality of the wall up and down.

The requirements must be explained to the wall putty worker, it is necessary to thicken a few centimeters, or to eradicate a few centimeters up and down the size within two millimeters, so that after the wall is leveled in the later stage, the gap between the door edge line of the wooden door and the wall can be achieved when the wooden door is installed, and there is no need to carry out a putty and glue treatment. <

Then we need to pay attention to the following situations when installing door casings and doors:

1. When installing the door, it is necessary to ensure that the door height is consistent with the door frame, not too small or too small, otherwise the decoration effect will not be achieved. Because the door is too low, there will be a large gap between the top of the door and the wall, which is not only easy to accumulate dust, not easy to clean, but also affects the appearance. If the door is too high and does not match the wall, it will lead to the embarrassment that the door cannot be closed.

Therefore, when installing the door frame, we should pay special attention to the size;

2. When installing the door frame, the size of the door and the size of the wall should be consistent, and it should be measured before purchasing. And when installing the door frame, it should also be decided according to the height of the user, if the family members are taller, the door can be installed higher, otherwise there will often be a meeting in daily life;

3. When installing the door casing, in addition to considering its size, we should also pay attention to the quality of the door casing, especially the door frame of the bathroom, once wet, it is easy to blacken, peel and crack. Therefore, choose a door frame that is waterproof. In addition, when installing the door frame, be sure to choose a material with strong nail grip to ensure that the door leaf will not fall off.

Do not hammer in the nails at once when installing, otherwise it will cause the horizontal and vertical changes of the door frame, and you need to adjust all the adjustments before you can nail them all into and fix. Then calculate the size of the door stop according to the width of the door, use the nine-centimeter board to open the sheet, fix it with mosquito nails according to the vertical line, and use a solid wood closing strip to close the mouth. At the end of the day, the worker saws off the excess cork used to adjust the leveling and finally flattens it with a planer.

It should be sprayed with some latex paint, and if it is wet, it should be sprayed a little more, so it must be sprayed, so that the home will be particularly warm, and it is also helpful to the human body.

The place of the door cover is generally sprayed with a lot of foam glue. Of course yes, because it's all a necessary process.

The place where the door sleeve also needs to be scraped putty, and putty needs to be scraped, but there is no need to brush latex paint, which is too much.

The general decoration order is very important, so is the optional door cover or scraping putty? Each worker has their own decoration style, some people first scrape putty, some people first install the door cover, in fact, this can be, but most of them will install the door cover first and then scrape the putty, and finally install the door, each has its own advantages and disadvantages, you can see the introduction provided by this site.

Install the door cover first and then scrape the putty, because installing the door cover requires tools and materials, such as chainsaws, woodboards, etc., which will cause certain damage to the wall. At this point, if the walls have been smeared with putty, they will also be damaged. After installing the door casing, it is more cumbersome to repair, and there will be some gaps between the repaired wall and the original wall.

It's best to scrape putty and brush the wall paint before installing the door!

First, brush the wall paint with putty first so as not to contaminate our wooden doors. Everyone knows that our interior wooden doors are all whitewashed. If the putty paint accidentally falls on the wooden door, it will be troublesome to deal with it later.

And there is a possibility of damaging the painted surface of the wooden door, so it is personally recommended to scrape off the putty for painting.

Second, the reason for the construction period: wooden doors are usually custom-made and require a large number of sizes. It will then be produced in the factory.

The whole process takes about 50 days. If you wait for the wooden door to be installed and then scrape off the putty to paint the walls, the construction will take longer. When the bricklayer is finished, it will stop working and wait for the wooden door.

Therefore, I personally believe that after the bricklayer is finished, the walls are scraped with putty to paint the walls. The whole process of scraping putty and painting the walls also takes about a month. This period was only used to wait for the production of wooden doors.

In this way, the schedule is perfect. This is also the experience summed up in the long-term renovation.

Solid wood doors can scrape putty powder, but you need to use putty as a primer (pay attention to the ratio of hardener) and then scrape the putty.

Putty glue: The main substrate is plaster powder (or white powder). Place the gypsum powder in a bowl or glass plate, first add the right amount of water, mix well to make the plaster powder swell, then add a thick leather glue, and add pigments such as red clay, bottom plate yellow, and ink according to the color of the furniture.

It is ready to use after it has been fully made into thick porridge.

Putty is a polymer material consisting of a body ash (base ash) and a curing agent. The main ash content is mainly unsaturated polyester resin and filler, and the curing agent is usually initiator and plasticizer. It plays a role in initiating aggregation and enhancing performance.

Summary. I have personally experienced scraping putty inside the door casing, because I have a door casing in my house and its surface is somewhat damaged, so I decided to scrape putty to repair it. The advantage of scraping putty is that it can make the surface of the door sleeve smoother, and the damaged part of the surface of the door sleeve can be repaired, making it look more beautiful.

In addition, scraping putty can also prevent dirt and oil on the surface of the door cover, thus prolonging its service life. In addition, scraping putty can also improve the sound insulation effect of the door cover, so that the indoor noise will not be too loud, making the indoor environment more quiet and comfortable.

I have personally experienced scraping putty inside the door casing, because I have a door casing in my house and its surface is somewhat damaged, so I decided to scrape putty to repair it. The advantage of scraping putty is that it can make the surface of the door sleeve smoother, and the damaged part of the surface of the door sleeve can be repaired, making it look more beautiful. In addition, scraping putty can also prevent dirt and oil on the surface of the door cover, thus prolonging its service life.

In addition, scraping putty can also improve the sound insulation effect of the door cover, so that the indoor noise is not too large, making the indoor environment more quiet and comfortable.

Fellow, I really didn't understand, I can be more specific.

In response to the problem, the benefits of scraping putty are:1It can improve the flatness of the wall surface and make the wall surface smoother; 2.

It can improve the moisture resistance of the wall and prevent damage caused by humid air to the wall; 3.It can improve the wear resistance of the wall and make the wall more durable; 4.It can improve the stain resistance of the wall and make the wall easier to clean.

In addition, scraping putty can also improve the UV resistance of the wall and prevent the shouting damage caused by ultraviolet rays to the wall.