How to learn the delicate keel statue, how to make the exquisite keel statue

The normative approach is this:

1. Clay sculpture sample, if the shape is a little more complex or you can't grasp it, you should have a 1:1 model of clay sculpture;

2. Confirm that the mud is molded accurately and turned into FRP;

3. Stickers on the FRP model can be pasted in different positions with many small pieces of lattice paper, and the outline of the model can be drawn as large as possible, to ensure that the paper can be conformed, do not stick too firmly, because it has to be torn off, and the outline is drawn down with a pen at each turning position. Cut off the stickers that are not in place. Numbered on paper and on models.

4. Make a grid on the surface of the white steel in proportion, and if it is an equal-sized model, make a grid of the same size.

5. Build a keel according to the model, if it is a small sample enlargement, it is relatively difficult. The main thing is to find the three-dimensional coordinates of the key points and connect these points reasonably.

6. Trace the same outline as the corresponding paper on the white steel plate with a lattice, and cut it out with electric shears or a portable jigsaw.

7. Beat and shape one by one, and compare it on the keel, which should be consistent with the keel;

8. Gradually weld each small piece knocked out to the keel, and finally seal all the gaps, full welding, grinding and polishing.

In this way, it is basically completed, and finally the whole should be checked, whether there is any inappropriate place, and if so, try to adjust it until you are satisfied. However, sculpture modeling is indeed not very easy to learn, it takes a little time, and you must have an artistic foundation. Of course, you can also find a sculpture maker to help you make a model, and you no longer need an art foundation, but you still have to ask the sculpture maker to often check whether the shape is out of shape and check it.

The delicate keel statue is made as follows:

Prepare a sample of clay sculpture, and confirm that the clay shaping is accurate, and turn it into fiberglass; Stickers on the FRP model can be pasted in different positions with a lot of small pieces of paper with lattice, and the outline of the model can be drawn as large as possible, to ensure that the paper can be conformed, do not stick too firmly, because it has to be torn off, at each turning position with a pen to trace the outline, paste not in place to cut off, on the paper and on the model number; Make a grid on the surface of the white steel in proportion, and if it is an equal-sized model, make a grid of the same size; Build a keel according to the model, if it is a small sample enlargement, the relative difficulty is higher, mainly to find the three-dimensional coordinates of the key points, and connect these points with reasonable grinding; Draw the same outline as the corresponding paper on the lattice white steel rock slab, and cut it with electric shears or a portable jigsaw; Piece by piece, it is beaten and formed, and compared on the keel, it should be consistent with the keel; The small pieces that are knocked out of each piece are gradually welded to the keel, and finally all the gaps are sealed, fully welded, polished, and polished, and the exquisite Zheng You imperial keel statue is ready.