Goji berries have long roots, how to make bonsai?

Updated on home 2024-06-17
10 answers
  1. Anonymous users2024-02-12

    The roots of wolfberries are very long, and the method of making bonsai is as followsThe shape of the wolfberry tree is very beautiful, and its leaves are also very green, its flowers are purple, and the fruits are also bright red, which is a particularly good bonsai plant. Nowadays, many people cultivate wolfberry as an ornamental plant, and its bonsai is based on roots instead of dry. <>

    Ornamental wolfberry, its branches aging is very slow, so most of them are to get the developed roots out of the master, the root system is also about one meter long, its diameter is one centimeter, slowly winding is more ornamental than its stem. We can take root cuttings, the personality of wolfberry is very distinctive, directly cut its roots, you can get a small seedling. <>

    When making this, you can take advantage of this, cultivate the buds of it, and then slowly raise the roots of the flowers with dry, so that the bonsai made is very beautiful, when picking wolfberry roots, prepare a larger pot, move the roots to the pot, expose 1 3 can, when planting, put a little less water for Saipei, first put it in a ventilated place, so that it can grow well. Wait for it to grow for about half a year, then expose its roots and then give it a support with bamboo strips, otherwise it will be blown down.

    There are new branches broken after a year of branches will have aging, you can dig out a new wolfberry for planting, wolfberry cultivation for about a year, you can dig it out in the spring and then pot, when digging wolfberry must first put some water, so that each time you water the normal time can be, watering about five days, let the wolfberry have a little water loss to dig it out, put it in a ventilated place for about two hours, and then shape it. Tie it up with an electrician's tape first, and then tie it up with the roots of the wolfberry, and the aluminum wire comes along the trunk, and you can twist it at the root, which is very beautiful. When the wolfberry bonsai is cultivated, it must be put into its branches for enough time, so that it is difficult for the wolfberry to grow when it is picked, and then when the branches are raised, the buds on the branches should also be properly pruned, leaving most of them with the same length as the roots.

  2. Anonymous users2024-02-11

    At first, you can use aluminum wire to pull the branches to grow horizontally, which will be more beautiful, and then you need to cut off the messy branches, dig out the plants with the soil, wrap them in plastic bags, and put them in a beautiful pot, which can become a bonsai.

  3. Anonymous users2024-02-10

    You can coil up the roots of the goji berries and make them in a slightly larger pot. After that, fill the pot with soil and you're good to go.

  4. Anonymous users2024-02-09

    First plant the wolfberry in a pot, and then wait for the wolfberry to grow to a certain length, thickness, and branching with iron wire or aluminum wire to wrap and bend it to make shapes. After a few years of shaping and fixing, remove the winding iron wire or aluminum wire, and pay attention to the later pruning, watering, and fertilization.

  5. Anonymous users2024-02-08

    Growth habits. Goji berries prefer cold climates and are very cold-resistant. When the temperature is stable through 7 or so, the seeds can germinate, and the seedlings can resist 3 low temperatures.

    In spring, when the temperature is above 6, the spring buds begin to sprout. Goji berries overwinter at 25 years without frost damage. The root system of wolfberry is well developed, the drought resistance is strong, and it can still grow in arid desert land.

    In order to obtain high yields, it is still necessary to ensure the supply of water, especially in the flowering and fruiting period. Long-term waterlogged low-lying land is not conducive to the growth of wolfberry, and even causes root rot or death.

    With sufficient sunlight, the wolfberry branches grow strongly, with many flowers and fruits, large fruits, high yield and good quality. Goji berries mostly grow in alkaline soils and sandy loam soils, and are most suitable for cultivation on deep, fertile loam soils. [1]

    It can be used in a foam box of about 20*20*40 cm to fill soil and potted plants.

  6. Anonymous users2024-02-07

    The biggest taboo of wolfberry bonsai is to put it in the greenhouse too early, germinate and grow too early, and the wolfberry bonsai must not be watered in winter, and it can be watered once in forty days.

    In fact, the dormancy period of wolfberry is very long, half of the year is dormant, such as the hottest time, it will have a dormancy period of about a month; There is also the coldest time, when it has a dormant period of up to four months or so.

    Since the dormant wolfberry has stopped growing, it is equivalent to being in a sleeping state, and its own transpiration will be weakened at this time, so it does not need too much water at this time, and it is better to water less or even no watering.

    Once the water shed is replenished too much, it may promote the germination of side branches, but as soon as it grows, it will not be able to resist the low temperature and be frozen to death, which will affect the quality of wolfberry dormancy, thereby affecting its flowering and fruiting chain stool next year.

    Maintenance method of wolfberry bonsai

    1. Goji berries are more suitable for a straight and dry growth environment, so you must not water too much, and prevent water accumulation, otherwise it will damage the root system of the plant, thereby affecting the normal growth of the plant. Especially in winter, once watered too much, the plant's own heat preservation ability will be weakened, resulting in frostbite and even freezing to death.

    2. Keep warm properly. Potted wolfberries have poor cold resistance, so it is necessary to start insulating the bonsai at the beginning of winter, and it is best to place the bonsai in a place where it can fully expose to sunlight to ensure that the plants can absorb enough slow light.

  7. Anonymous users2024-02-06

    Therefore, you can use the characteristics of wolfberry branches that are easy to take root and root to sprout, and the stump is planted upside down, that is, the stem after pruning is buried in the soil, and the original roots are pruned and cultivated as branches, so that you can cultivate a pot of old and slow, crooked wolfberry bonsai, and the production method is as follows:

    1. Sow seeds with seeds, bury wolfberry seeds in potting soil, water them with enough water, place them in a cool and ventilated place, keep warm and moisturize, and they will sprout and grow soon;

    2. Cuttings in spring or rainy season, this method is faster than the sowing method, but the shape is not ideal;

    3. Go to the field to dig up the thick and healthy wolfberry stumps with good growth form, and bring them back for planting.

  8. Anonymous users2024-02-05

    Using wolfberry stumps to make bonsai is also a way for many flower enthusiasts, and every summer and autumn, the branches are hung with red wolfberries, which is also very beautiful. So how do you make a bonsai out of a wolfberry stump? Let's go with Uncle Gardener to learn how to make bonsai with wolfberry old piles.

    1. Transplanting should be done as soon as possible.

    Goji berries will be dormant in winter, and if you want to transplant them, you must do it as soon as possible, the survival rate is high, and the growth will be better in the later stage. Transplanting in the north is best done at the end of February when the ground thaws, and transplanting in the south is best done at the end of January and early February. If the transplanting is too late, the new sprouts of wolfberry sprout and sprout, and the root system has begun to grow, and the survival rate is difficult to guarantee.

    2. Structural modeling.

    The shape of the wolfberry stump itself is different, and each has its own characteristics, so it is necessary to determine the shape you want to create according to the different shapes. The common shape is the curved dry type or the cliff type, which can be made into a bridge type, and can also be made into an elephant form, a root type, a multi-dry type and other shapes, and the specific shape should be determined according to the shape of the stump itself, not a fixed modeling mode.

    3. Reasonable pruning.

    The creation of wolfberry stump shape is inseparable from reasonable pruning, which can play an auxiliary role. First, cut off the branches and leaves that affect the growth and aesthetics of the plant, thin the branches and leaves, and cut off the weak branches, too dense branches, cross branches, and overlapping branches in time, which can reduce nutrient consumption, promote growth, and also be conducive to beauty. After that, prune the branches according to the desired shape, and the growth rate of goji berries is fast, so it is okay to prune heavily.

    4. Pull branches. The branches of wolfberries are soft, and they can also be pulled to create the desired shape. This method is suitable for 1-2-year-old branches, and you can use rope or wire to pull or lift the upright branches at a large angle to make the branches look like they want.

    5. Climbing. Use a small wire to wrap it around the branch you want to change, twist the angle and direction of the wolfberry branch little by little, and wait until the branch is finalized, you can disassemble the wire on it.

  9. Anonymous users2024-02-04

    Goji berries are easy to grow and manage. To make bonsai, one is to sow seeds with seeds, bury wolfberry seeds in potting soil, water enough water, place them in a cool and ventilated place, keep warm and moisturize, and they will sprout and grow soon. However, it takes more time to cultivate a bonsai in this way; the second is to take cuttings in spring or rainy season, which is faster than the sowing method, but the shape is not ideal; The third is to go to the wild to dig up the thick and healthy wolfberry stumps with good growth form, and come back to plant.

    This method is fast to make bonsai, but it is difficult to select materials. The growth of wolfberry has a characteristic, that is, there are many branches, clusters, and the branches are not easy to bend. Just this kind of stump bonsai will look monotonous and dull.

    Therefore, the stump is often planted upside down, that is, the pruned stem is buried in the soil, and the original roots are cultivated as branches after pruning. In this way, it can be cultivated into an old, crooked wolfberry bonsai.

  10. Anonymous users2024-02-03

    First of all, choose a plant with thick branches, at least the same size as your thumb, leave about 20 cm in the upper part, and cut off the others, and after planting to grow new branches, bend and tie them according to your needs and preferences. Home cultivation tends to produce less fruit due to fewer insect vectors.

Related questions
6 answers2024-06-17

The biggest taboo of wolfberry bonsai is to put it in the greenhouse too early, germinate and grow too early, and the wolfberry bonsai must not be watered in winter, and it can be watered once in forty days. >>>More

19 answers2024-06-17

Ingredients: 300 grams of rice, 250ml of milk, 6-8 red dates, 10 grams of wolfberry, 15 grams of lily, 30 grams of corn. >>>More

10 answers2024-06-17

Ingredients. Ingredients: 500g pears, 50g glutinous rice, 50g japonica rice, 20g wolfberry, appropriate amount of water, appropriate steps. Step 11 of the preparation of Sydney wolfberry porridgeSoak the wolfberries for about 10 minutes, then wash them and dry them for later use. >>>More

9 answers2024-06-17

Goji berry leaf soup. Ingredients: peanut oil (20g), salt (to taste), monosodium glutamate (a little) vinegar, to taste. >>>More

9 answers2024-06-17

Ganoderma lucidum varnishing and bonsai production method is to dry the collected Ganoderma lucidum; After soaking with the prepared aqueous solution of dish soap, rinse it with water and steam or blanch it for 1-10 minutes, then dry it in the sun or a ventilated place until it is hard; 3-30mm ceramsite or foam plastic particles are evenly covered on the upper layer of the fixing in the pot, and the filler used can be dyed into color as needed, and it can also be fixed in the pot with cement or glue.