The home is full of solid wood furniture, what can be done to prevent them from cracking?

Updated on home 2024-06-18
13 answers
  1. Anonymous users2024-02-12

    In dry weather, you need to keep goldfish, place greenery, open humidifiers, and so on indoors. In humid weather, it is necessary to put desiccant indoors, etc. Do not cling to the wall, as the wall is a dark place and there will be some dampness.

    If the proximity to the damp wall will cause the wood to absorb moisture and swell, and it is easy to crack and rot, it is necessary to dehumidify frequently, usually once every half a month.

  2. Anonymous users2024-02-11

    First of all, you should take care of the wooden furniture yourself, and then apply more olive oil to prevent cracking.

  3. Anonymous users2024-02-10

    Pay attention to indoor ventilation, keep the furniture with a stable moisture content, and turn on the dehumidification function of the air conditioner in the rainy season; In winter, the air is dry, and the humidifier should be used to increase the air humidity appropriately; The air humidity is regulated within the optimal range to prevent the furniture from cracking. Furniture should be placed away from direct sunlight.

  4. Anonymous users2024-02-09

    If you want to prevent cracking of solid wood furniture, first of all, you should pay attention to the fact that the temperature at home is not too high or too humid, which is not good for the maintenance of solid wood furniture.

  5. Anonymous users2024-02-08

    To prevent cracking of solid wood furniture at home, you can choose to wipe olive oil to make a moisturizing and protective film.

  6. Anonymous users2024-02-07

    1. The low floor is relatively suitable for solid wood furniture. Because the floor is higher and the wind is stronger, the moisture in the wood is easy to be blown dry, which is easy to cause cracking. It is recommended to pay attention to indoor ventilation above three floors to keep the furniture stable moisture content.

    2. Dehumidification in the rainy season and humidification in the dry season. In the rainy season, the dehumidification function of the air conditioner can be turned on; In winter, the air is dry, and the humidifier should be used to increase the air humidity appropriately; The air humidity is regulated within the optimal range to prevent the furniture from cracking.

    3. Use furniture essential oils to lock in moisture. You can buy furniture care essential oils in the supermarket and apply them evenly to the surface of the furniture, so that you can lock in the moisture in the wood, prevent the furniture from deforming, and moisturize the wood at the same time.

    4. Varnishing is commonly used with oil wax. The daily wiping of solid wood furniture is also particular, the use of soft cotton cloth when wiping, the cotton cloth can be slightly damp, but not wet, to squeeze out the water as the degree, and to wipe along the texture of the wood, avoid wiping with alcohol and other chemical solvents or detergents, so as not to corrode the furniture paint, resulting in paint cracking. In order to avoid the phenomenon of dullness and fading of the furniture after a period of use, the furniture can be waxed and other corresponding treatments on a regular basis.

  7. Anonymous users2024-02-06

    Cracking of wooden furniture, in fact, is the nature of wood, usually pay more attention to maintenance, you don't have to worry too much about cracking. Today, I will work with you to learn a few tips for maintaining solid wood furniture in winter. The raw materials of mahogany furniture will be boiled and dehydrated for more than 30 days to ensure the stability of the wood structure and not be subject to cracking and deformation caused by climate change.

    The cracking of general furniture is related to the principle of raw materials and production process. Solid wood furniture is now very commonly used, and the environment in which it is located is particularly important. Solid wood furniture should be placed away from the heating outlet, where the window sill can be directly exposed to sunlight.

    When placing hot soup and boiling kettle on the dining table and coffee table, pay attention to placing thermal insulation mats first. There is no technology or method that can guarantee that the wood will not crack. All drying and post-maintenance are just a means of prevention, and whether it cracks or not is only a matter of probability.

    This is suitable for the northern region, because the northern region is relatively dry, so it is best to put a humidifier on the solid wood furniture, so as to ensure that one water molecule in the air, in the south, you can also put one in winter. Solid wood furniture under modern technology is brushed with lacquer or wood wax oil, etc., generally does not need special care, and the dust can be dusted off with a duster, and it is important not to wipe it with a wet rag.

    <> the north, it is best to choose catalpa furniture, which is not easy to crack, and cypress wood is more likely to crack. If you can afford it, mahogany is a good choice. Wax frequently to close the pores on the surface of the wood fibers and reduce the evaporation of water.

    By doing the above, you can better prevent cracking of wooden furniture.

    Now with the improvement of the quality of life, people buy more and more solid wood furniture, and there are many types of solid wood furniture. However, I think it can be divided into two categories, ordinary solid wood furniture and precious mahogany furniture. We opened the doors and windows, and the humidity was about the same inside as outside.

    Furniture will absorb moisture. In winter, the weather is already dry, and the air conditioning, heating, and stove make the room even drier. At this time, the moisture in the furniture is greater than the moisture in the environment, so it is easy to crack.

  8. Anonymous users2024-02-05

    Be sure to choose good quality furniture, don't put some particularly hot things on top of the furniture, ensure the humidity in the air, and take more care.

  9. Anonymous users2024-02-04

    You should not put these furniture in the sun, but should put them in a place where the sun is not so strong.

  10. Anonymous users2024-02-03

    These solid wood furniture should be oiled or painted after a period of time to prevent the solid wood furniture from cracking due to prolonged exposure to air.

  11. Anonymous users2024-02-02

    When using furniture, it does not go through high temperatures, does not soak in water, and does not experience impact, and can be wiped with a dry towel to prevent cracking.

  12. Anonymous users2024-02-01

    The first thing is to put these furniture in a place where the sun does not shine, and you can also put some leather cases on it, and you must wipe it frequently.

  13. Anonymous users2024-01-31

    1;Protection from the sun, which can cause drastic changes in the moisture content of the wood, which can lead to cracking and deformation.

    2;It is also very important to maintain the humidity balance of the use environment, which is also difficult to control, after all, the changes in the four seasons of the year are relatively large, and one point is very important, that is, the production process of solid wood furniture, which is also ignored by many consumers when buying furniture, if the production process of solid wood furniture is proper, cracking and deformation can be avoided by more than 80%; The same solid wood furniture is sold to the north and south, and its production process is different.

    Under the premise of suitable production process, after one year of use, the wood adapts to the use environment, and the probability of cracking and deformation in the future is lower; It is important to find a reliable solid wood custom manufacturer

Related questions
6 answers2024-06-18

1. Beechwood. Beech is also known as southern elm, because it generally grows in the south, and is also known as the "declining aristocracy" among the people. In the Ming and Qing dynasties, as the main wood of traditional furniture was popular among the people, which also made the beech wood gradually decrease, and even became a key protected plant in 1999, and the stores specializing in selling beech on the market decreased, and now the beech wood sold in China is mostly imported from Europe and the United States, which belongs to the high-grade furniture wood. >>>More

16 answers2024-06-18

I bought Kaiqisen furniture at Huanyu Furniture 4 years ago! It feels very good to use, the color is particularly bright, and I haven't encountered the problem of cracking until now, their after-sales service is also good, I think begonia wood is still a good choice, and I am ready to buy Kaiqisen's furniture in the next house!

11 answers2024-06-18

1.Control the humidity of the room and buy a smart humidifier to solve the problem. >>>More

13 answers2024-06-18

OK. CNC cutting machine is nothing more than cutting and engraving modeling, ordinary woodworking engraving machine can also do ah, why buy cutting machine? Many customers have such questions, CNC cutting machine is much higher than the ordinary multi-process woodworking engraving machine, what are the advantages that make many customers choose the cutting machine, let's analyze it for you. >>>More

12 answers2024-06-18

1 Preparation.

Before the rubber spelling of pine furniture, first of all, the secondary drying, rejection, cross-sectioning, pine furniture before the glue spelling, first of all, the second drying, rejection, cross-section, longitudinal and trimming and other processes. Above, cutting and trimming and other processes. Generally, the moisture content of the wood just purchased is more than 15%, if the processing and production are carried out directly, the pine furniture will produce cracking, bending, loose structure and paint gas processing and production, and the pine furniture will produce cracking, bending, blistering and other damage. >>>More