How should we prevent cracking of solid wood furniture

Now solid wood furniture has been dried, the moisture content is controlled between 15-25%, at this time the stability of solid wood furniture is very high, but solid wood products must not be iron, after a long time will definitely be a little cracked. Solid wood furniture is now very commonly used, and the environment in which it is located is particularly important. Solid wood furniture should be placed away from the heating outlet, where the window sill can be directly exposed to sunlight.

When placing hot soup and boiling kettle on the dining table and coffee table, pay attention to placing thermal insulation mats first.

Solid wood furniture, especially in cold and dry places in the north, is most prone to cracking, try to avoid direct sunlight, avoid water evaporation, waxing can also avoid the evaporation of wood moisture and oil. In the north, it is best to choose catalpa furniture, which is not easy to crack, and cypress is more likely to crack. 1. Ensure the appropriate humidity of the indoor environment, 2. Wipe frequently with a wet towel to make up for the surface moisture.

3. Avoid direct sunlight for a long time, so that the surface moisture evaporates excessively. 4. Wax frequently to close the pores on the surface of wood fibers and reduce the evaporation of water.

But it is also necessary to know that solid wood furniture may crack, especially in winter, when the air is dry and the indoor humidity is low, it is easy to cause cracking of solid wood furniture. Cracking of wooden furniture, in fact, is the nature of wood, usually pay more attention to maintenance, you don't have to worry too much about cracking. Under normal circumstances, there will be two drying before the production and delivery of solid wood furniture, and the raw materials of mahogany furniture will be boiled and dehydrated for more than 30 days to ensure the stability of the wood structure and not be subject to the cracking and deformation of furniture caused by climate change.

When the surrounding environment changes, the moisture inside the wood will be affected, which will cause a slight change in the internal structure of the wood, and the change in the structure is manifested by the cracking and deformation of the furniture.

The humidity of the environment in which we use furniture varies greatly from season to season. For example, in the hot and humid weather in summer, when we open the doors and windows, the humidity inside is about the same as outside. Furniture will absorb moisture.

In winter, the weather is already dry, and the air conditioning, heating, and stove make the room even drier.

Proper humidification of the room to prevent cracking of furniture. As we all know, the price of wooden utensils is generally not cheap, if you do not pay attention to maintenance, cracking and other conditions, the impact on aesthetics is very huge, and the loss caused is also distressing, especially in winter, in order to avoid cracking, you can increase the humidity in the room, such as buying a humidifier, or putting a basin of water, etc.

Maintain indoor temperature and humidity. The main reason for the cracking of solid wood furniture is the temperature and humidity in the room, which is not suitable for the storage of solid wood furniture, as long as the temperature and humidity are adjusted to the range suitable for the storage of solid wood furniture, the cracking of raw furniture can be prevented.

Solid wood furniture should be coated with a protective paint on the outside, as well as a waterproof coating, so that it will not crack in an environment with high room temperatures.

Do not place solid wood furniture in a place where the sun is very strong, and if it is placed in a place where the sun is very strong, it should be covered with a cloth.

Keep solid wood furniture in a cool place, as solid wood furniture is prone to cracking under high temperatures.

Prevent wood.

There are many ways to crack and can be treated with high temperature setting. It can effectively eliminate the possibility of internal cracking of wood, and can also use mechanical method to prevent cracking, that is, to use anti-cracking rings, and can also apply waterproof coating on the end and surface of wood, which can slow down the evaporation rate of wood surface, which can also reduce the cracking of wood. It can also be removed with a waterproofing agent, which is also a very good way to prevent cracking.

1. Solid wood furniture is easy to crack in winter.

Solid wood furniture is made of wood, which is susceptible to the influence of ambient humidity and changes in wet expansion and contraction. The winter climate is relatively dry, and many families often take heating measures indoors due to the need for warmth, which increases the dryness of indoor air, resulting in the cracking phenomenon that is difficult to repair due to the serious lack of water in solid wood furniture.

2. Reasonable indoor humidification to prevent furniture cracking.

Solid wood furniture is generally not cheap, if you don't pay attention to good maintenance, cracking and other situations affect the appearance, resulting in losses are very distressing. In winter, solid wood furniture is most susceptible to dry cracks due to the low humidity in the room. So once you know why, you can take steps to increase the humidity in your room.

The common method is to buy a humidifier and put it indoors, in addition, you can also place a basin of water or put more plants that are conducive to indoor moisturizing, such as pothos, rich bamboo and so on.

Avoid the misunderstanding of moisturizing to prevent excessive humidification: although solid wood furniture is afraid of dryness, it also has a greater hard wound is afraid of moisture, and too high moisture is easy to make solid wood furniture swell, corrode and mildew. After placing a humidifier indoors in winter, it is appropriate to control the humidity of the room at 40% to 60%.

In addition, it is necessary to prevent placing the humidifier directly on solid wood furniture, or placing solid wood furniture too close to the humidifier for a long time.

3. Solid wood furniture should be kept away from heat sources such as heaters.

In winter, when the weather is cold, each family will have its own heater to keep warm. Sometimes, in order to get closer to the heat source, the heater is unconsciously pulled next to the solid wood furniture. As everyone knows, these furniture are afraid of high temperatures, and long-term high temperature baking is easy to make the wood lose moisture, local dry cracking, deformation, and deterioration of the paint film.

It is best to place solid wood furniture at least 1 meter away from the heater.

4. Reduce the ventilation time of opening windows in winter.

In winter, the indoor humidity is higher than that outside, so opening the windows for ventilation in winter will only bring in the cold air from outside, making the room drier. Therefore, it is recommended that families with more solid wood furniture should reduce the time and frequency of opening windows for ventilation in winter to maintain the appropriate humidity indoors. At the same time, it should be noted that solid wood furniture should not be placed in vents.

Solid wood furniture is very high-end and high-grade, and it needs to be maintained daily. There are the following ways to prevent cracking of solid wood furniture:

Soft cotton cloth should be used during daily scrubbing, and the wet cotton cloth should not be able to squeeze out water, scrub along the grain of the wood, and avoid scrubbing with alcohol and other chemical solvents or detergents to prevent corrosion of furniture paint and paint cracking.

Use furniture essential oils to lock in moisture, you can buy furniture care essential oils in the supermarket and apply them evenly on the surface of solid wood furniture, so that you can lock in the moisture in the wood, avoid the deformation of the furniture, and moisturize the wood at the same time.

Dehumidification in the rainy season and humidification in the dry season. In the rainy season, the dehumidification function of the air conditioner can be turned on to prevent mildew of wooden furniture; In winter, the air is dry, apply a humidifier, increase the air humidity appropriately, avoid sun exposure, and try to put the furniture in a cool and dry place.

Most of the cracking of wood is caused by changes in the moisture content of the wood. Try to keep the air humidity in the place where the solid wood furniture is placed in a relatively balanced state. Avoid humidity, direct sunlight and other factors that affect air humidity.

First, do a good job of waterproofing.

Second: Try to avoid sun exposure.

Third: Avoid strong bumps.

Regulate air humidity.

Apply wood wax oil.

Staying away from heaters and properly ventilating in winter can prevent solid wood furniture.

Cracking, because solid wood furniture is made of wood, they retain the characteristics of the plant to swell and dry up, and it is also necessary to combine its characteristics when preventing the furniture from cracking.

Regulate air humidity.

Winter is a cold season, many families in order to meet the needs of warmth will turn on the floor heating or air conditioning, which will make the indoor air drier, easy to make solid wood furniture crack, like to prevent this situation to use humidifiers indoors.

Appropriately increase the humidity of the air, do not let the gathering of excessive dryness will not make the solid wood furniture crack, in addition to put some green plants indoors, you can put a basin of water, or often use a wet mop to mop the floor to adjust the humidity of the air, which can also prevent the cracking of solid wood furniture.

Apply wood wax oil.

Applying wood wax oil on the surface of solid wood furniture can nourish the surface of solid wood furniture and lock the moisture in the wood, which can prevent the furniture from drying out and deforming due to excessive water loss, but wood wax oil has a certain time limit, and its validity period can only be maintained for 3 4 months, so if you want to prevent cracking of solid wood furniture, you should care with wood wax oil every 3 or 4 months.

Keep away from heaters for proper ventilation

If you want to prevent cracking of solid wood furniture, you must keep it away from the heater at home, because the temperature of the heater is relatively high, and the solid wood furniture is afraid of high temperatures, and the long-term baking is easy to let the wood lose moisture, and there will also be cracking and deformation, the interval between solid wood furniture and the heater can not be less than one meter, in addition, the temperature difference between indoor and outdoor after entering the winter is relatively large, at this time, opening the window for ventilation will let the cold air outside enter the room, which will cause some adverse effects on the solid wood furniture, so when the window is opened for ventilation in winter, Be sure to choose a good time to control, and don't let solid wood furniture be placed on the tuyere.

In the usual time to do more care, and should also add more care liquid, so that the treatment is more convenient, can make the wooden furniture better.

Solid wood furniture should be placed in a cool place, because solid wood furniture will crack when exposed to the sun.

Usually we need to maintain solid wood furniture, scrub with warm water, do not use strong light, keep the temperature in the house not too high, ventilate frequently, do not damp, you can prevent cracking.

It is better to do a maintenance for wooden furniture at ordinary times, and secondly, we should also pay attention to the specific situation of wooden furniture, and we should also do more care.

Solid wood furniture is everyone's favorite type of furniture, solid wood furniture is beautiful and atmospheric, the price is also very high, can be used for a long time, but improper maintenance is prone to cracking, how to prevent solid wood furniture cracking? How to maintain solid wood furniture? Let's master the maintenance method of solid wood furniture together!

One. How to prevent cracking of solid wood furniture.

1.Choose furniture with excellent quality, good craftsmanship and high-quality materials.

This stage must be controlled. For example, how well the drying process of furniture is done, what is the thickness of the board, and whether the mortise and tenon structure of solid wood furniture is close and strong.

2.Creation of a natural environment.

Don't let solid wood furniture go from one environment to one that changes a lot. For example, solid wood furniture is basically transported from the south to the north will have a more serious cracking deformation, including logs, boards, this is because of the climate in the north and south, the temperature and humidity are very different. Therefore, in dry temperatures, it is necessary to raise goldfish, place green plants, and open humidifiers indoors.

In humid temperatures, it is necessary to put desiccant and the like indoors.

3.Solid wood furniture is placed.

Do not stick to the wall, because the wall is a dark place, it will cause some damp conditions. If the wood is close to the damp wall, it will absorb moisture and expand, and it is easy to crack and rot, so it is necessary to dehumidify the hall, and the hall can be poured for half a day.

Two. How to maintain it in Solid Wood County.

Pay attention to the cleaning and maintenance of the appearance of the furniture: gently brush off the surface dust with a cotton dry and soft cloth on time, and wipe the dust on the corner of the furniture chair with a wet cotton silk wrung out of the water every once in a while, and then wipe it with a clean dry and soft cotton cloth.

Avoid scratches with hard objects: When cleaning, do not let the cleaning utensils touch the furniture, and pay attention not to let hard metal products or other tools hit the furniture, so as to protect its surface from scratches.

Maintain the stability of the environment: When using pure solid wood furniture, the environment should be maintained as stable as possible. In particular, there should be no drastic changes in temperature and humidity, otherwise it will cause deformation of the furniture.

Avoid sunlight: The long-term exposure of outdoor sunlight to the whole or part of the furniture should be minimized, and its placement is best in a place that deliberately avoids sunlight, or uses transparent gauze curtains to separate sunlight, so that it does not endanger indoor light and protects indoor furniture.

Many people will buy solid wood furniture for their homes when decorating, and solid wood furniture is more high-grade. However, solid wood furniture also has disadvantages, and if there is a problem of cracking in solid wood furniture, it will be a headache. Many people think that cracking of solid wood furniture is a quality problem, but in fact, in the production of solid wood furniture, there will be more or less cracking because of the process.

There are many reasons for the cracking of solid wood furniture, and only by mastering the reasons for cracking of solid wood furniture can we better prevent it. <>

Solid wood furniture is very atmospheric, and it is normal for solid wood furniture to have slight cracks. As long as it is solid wood furniture, slight cracks will appear. This is because solid wood furniture is dried when it is made, which will reduce the phenomenon of cracking in the furniture.

In order to save costs, some unscrupulous merchants do not strictly dry the wood and then sell the furniture to consumers. Consumers will have the problem of cracks after use, because the wood has a high moisture content, then it will crack. <>

How can we prevent cracking of solid wood furniture? When buying solid wood furniture, you should choose brand furniture and find a large manufacturer, so that solid wood furniture will be ***. The cracking phenomenon of solid wood furniture has a lot to do with external environmental factors.

If the heating is turned on for a long time in the cold season, the solid wood furniture will be deformed or cracked after being heated and baked. Some people do not pay attention to maintenance after buying solid wood furniture home, and will expose the furniture to the sun. <>

After paying attention to maintenance for a long time, the furniture will also crack. The furniture has a slight crack, and it can be left alone. If you really can't see it, you can also use sandpaper to polish the crack, and then bury the crack with fine powder and seal it with glue.

If the crack of solid wood furniture is very serious, you should contact the merchant and let the merchant send a professional master to repair it. When using solid wood furniture, you must pay attention to maintenance, do not let it be exposed to direct sunlight, and do not put it in an excessively humid environment.