-
1.What is the cause of cracking of solid wood furniture.
Reason 1: Moisture content of solid wood.
The most basic reason for the cracking of solid wood furniture is that the moisture content of the wood is not well controlled in the production process, which can be said to be a quality problem.
Reason 2: Climate.
The climate is different, the moisture content of solid wood is also different, which is related to geographical differences, the moisture content of solid wood in Beijing is generally about, and the moisture content of its furniture is in4%;The moisture content of southern timber is even higher, at 14%. Therefore, when solid wood furniture from the south is used after it is transported to the north, cracking will occur.
Reason 3: Improper use.
Solid wood furniture is also prone to cracking, deformation and other phenomena if it is not used properly, I don't know if you have found that the furniture placed by the window, the furniture that is often scrubbed with wet towels and the furniture that is moved at will are more prone to problems.
Reason 4: Damaged shipping.
If there is a bump or a big change in the climate during transportation, cracking of solid wood furniture is also relatively common.
2.How to solve the problem of cracking of solid wood furniture.
Tip 1: Small crack remediation.
If there are only some microcracks on the surface of solid wood furniture, you can directly fill it with 502 glue, and then scrape off the excess glue to not hurt the paint surface.
If it is a small crack, the treatment will be more complicated, you can mix old books and newspapers, alum and water and boil it into a paste, embed it in the crack, and wait for it to solidify; You can also use sawdust and glue to stir evenly, then embed in the cracks, and sandpaper can be sanded after drying.
-
If there is a serious quality problem, find the merchant to negotiate and solve it, and there will be cracks in the later stage. Or go to consumer associations and use legal means to protect their legitimate rights and interests.
-
The solid wood furniture you just bought should not have such a phenomenon It may be related to the quality of the surface veneer In an environment that is your home, overheating or always wiping (especially with wet towels) will cause some damage to the surface Cause deformation caused by excessive humidity General furniture is guaranteed for one year So you can find them to repair it.
Built-in wardrobes are more space-saving and more aesthetically pleasing, so many people will choose homemade wardrobes. However, because the wardrobe is embedded in the wall, this fixing method has its own unique construction requirements.
For example, when the side of the wardrobe is on the same plane as the wall, it needs to be pressed down with a wooden wire first, but many workers will directly contact the wardrobe with the wall in order to save trouble. As a result, cracks or even detachments may occur due to the different expansion coefficients of the panels and walls.
When connecting the wardrobe plank with the wall, it is first necessary to install a plank on both sides of the board in contact with the wall, so as to avoid cracking due to the different expansion coefficients between the plank and the wall.
In addition, the wardrobe is in direct contact with the wall, which is how it can be, and the work of moisture-proof treatment is indispensable. Once the wall is wet, then it is normal for the wardrobe to crack, and the clothes in the wardrobe will also get wet.
Then, if you find that the wooden board and the wall are cracked, you must find a professional carpenter to repair it as soon as possible, and don't do it yourself without painting, so that it will be bigger in the later stage, and even destroy the entire wall and wardrobe.
This warns us that when installing the wardrobe, no matter how busy we are, we must take time out to supervise the work, don't wait until the wardrobe cracks and destroys the entire wall and roof in half a year, and then regret the mistake, at that time crying more tears are in vain.
-
1.Causes of cracking of solid wood wardrobes.
2.The moisture content of solid wood is not well controlled, and there will be quality problems such as cracking and deformation. After the production of the wardrobe, the moisture content of the wood determines the shape and material of the wardrobe;
3.The moisture content of the wardrobe is one to two percentage points lower than the actual average moisture content of the air due to the weather. Due to the difference in geographical location.
In real life, solid wood furniture will more or less have some cracking or deformation. Many users will think that the furniture is broken and the quality is wrong. In fact, solid wood furniture, like us, will get sick due to sudden changes in certain climatic environments, especially in the season of the alternation of seasons, which is also the phenomenon of dry shrinkage and wet expansion of solid wood boards themselves.
The moisture content of solid wood in the north is generally around, and the moisture content of furniture is and; Southern timber has a higher moisture content of 14%. Therefore, after the solid wood furniture from the south is transported to the north, it will crack.
-
If the newly renovated cabinet cracks, it may be caused by the following reasons:
The material of the cabinet itself is unstable, and the cracks are pre-existing during the manufacturing process.
The cabinet is not installed properly according to the instructions, resulting in cracks in the cabinet due to external forces.
Improper use of the cabinet, such as placing too heavy items, causing the cabinet to crack due to external forces.
The ambient temperature is too low or too high, resulting in cracks due to changes in the material of the cabinet.
It is recommended that you judge the cause of the crack according to the actual situation and take corresponding measures.
We hope you find the above helpful.
-
Kitchen cabinets have been used for a long time, and the countertops may crack. How to repair the cracked countertop? Rilong decoration will take you to understand it.
If the countertop of the cabinet is cracked, the crack is generally polished first, then filled with glass glue, and then the crack can be dried.
If the table surface of artificial stone is cracked, it is relatively easy to deal with, and the cracking is not severe and can be corrected, but it depends on whether it is a transverse crack or a longitudinal crack, if it is a transverse irregular crack, it cannot be repaired, if it is a longitudinal clump early crack, it can be cut down, filled with special glue, and seamless splicing, but there will be a certain color difference. If the cracks in the countertop are not repaired early, water will seep into the cracks and affect the cabinets.
If it is a quartz stone raw material, the countertop cannot be corrected, and it needs to be replaced from scratch by a special worker. After the artificial stone countertop is stained or cracked, replacing it with a quartz countertop can greatly extend the life of the cabinet.
Cracking of the countertop may also be caused by the problem of the gasket strip and backing plate under the countertop, such as the poor material of the backing plate, the water seepage or leakage of the sink, and the backing plate will definitely expand when it encounters this situation, resulting in cracking of the countertop. In addition, there are also cases where there is no pad under the base surface of the collapse, or the pad is uneven, resulting in cracking. In this case, it is necessary to reinforce the backing plate and cabinet first, and then carry out the repair work of the countertop.
-
Home renovation.
The main locations that are prone to cracking in the bai are suspended ceilings, in-wall wardrobes, closet boards and.
Between the board and the wall, between the new wall, the old and new wall, the whole wall is knocked out, the construction hole, the 6-point wall, the trunking, etc.
The main causes of home improvement cracking are:
Causes of cracking in home improvement.
1. Traditional process defects: there are defects in the use of raw materials, which cannot be avoided, resulting in poor timeliness of seam effect.
Causes of cracking in home improvement.
2. Reasons for building settlement: irregular settlement of less than 10 cm within the year, and irregular settlement of less than 2 cm within 2 years. Due to the settlement of the building, cracking occurs when the adhesion of the joint material is lower than the settlement tension.
Causes of cracking in home improvement.
3. Reasons for the temperature difference: the seasons are distinct, the temperature difference between morning and evening, and the heating in the house is dry. Thermal expansion and contraction due to temperature differences is an inevitable natural law, and if the joint material lacks flexibility, it will lead to cracking.
Causes of cracking in home improvement.
Fourth, external vibration: the installation of household appliances, doors and windows external force. Cracking caused by excessive seismic force.
The use of cabinets began in the Xia, Shang and Zhou periods, when it was called "椟". In the Ming and Qing dynasties, cabinets became a must-have furniture for interiors, and the shape was finalized. Ming and Qing cabinets can be divided into square corner cabinets, rounded corner cabinets, and bright lattice cabinets according to the shape, and their constituent parts are also different.
Cabinet furniture mainly refers to cabinets made of materials such as wood, wood-based panels or metal for various purposes.
-
Because the wall is connected to the cabinet, the wall is not deformed, and the cabinet is made of wood, and the deformation is large, and the wall will produce cracks.
-
This is a very common situation, and it will be fine to repaint it again.
-
1. Large core board, the upper and lower sides are three-layer boards, and the middle is rectangular wood splicing and filling. The three-layer board and the filling layer are bonded with adhesive, this kind of board is not easy to deform, the strength is large, the cost is low, the base layer of wood products and the skeleton of the modeling are very suitable, the disadvantage is that the adhesive contains formaldehyde, and the veneer treatment should be done in the later stage, and the secondary pollution caused by paint, Boeing soft film, etc. will be used to affect environmental protection.
2. The crack is because the quality of the board is really not good, and the board of the surface layer is directly cracked.
-
The first screenshot is a blockboard (large core board), the gap is so large that it should be a hand puzzle, the quality of the machine puzzle is worse, and it is cheaper.
Cracks are not of good quality in the sheets. However, the crack of the plate does not affect the stability of the overall structure, but only affects the appearance.
A one-month-old baby can see people or objects in the horizontal direction and in front of him from 18 cm to 38 cm. >>>More
Probably, you should be careful if you have the following symptoms, mainly manifested in abnormal sense of smell, allergies, and abnormal lung function. Long-term exposure can cause various chronic respiratory diseases, nasopharyngeal cancer, colon cancer, neonatal chromosomal abnormalities, and even leukemia. If you want to protect yourself and your family from the harm of formaldehyde, you must learn the following methods. >>>More
Permanent bumblebee.
Although Renault is very good, but there is a time limit, and the time is up, and the car is gone. >>>More
We are all anti-virus experts, not education experts. But I want to say that as a high school student, I'm also a good person. Although it is a watershed moment for primary school to junior high school, it is still much easier than the high school entrance examination and college entrance examination, because junior high school is still compulsory education, and there is no saying that you can't pass the exam. >>>More
I hate these copy+paste ones the most.
The thighs are so thin, but the calves are hard. >>>More