Why does solid wood furniture crack? How can I remedy it on a daily basis?

Cracking of solid wood furniture is the original condition, and it is best not to put the furniture in a wet and cold place for application. Cracking of all-solid wood furniture: generally occurs in northern regions; Deformation of all solid wood furniture:

It generally happens in the southern region to see the sea. The primary problem that leads to cracking deformation: the type of wood, the new Chinese furniture is very rare to crack the problem, generally all European classical, contemporary, etc., the commonly used wood is not used through the secondary drying treatment, and the wood moisture content is unstable.

Painting process problems: the paint is too thin, there is no stronger maintenance wood, resulting in the wood and the atmosphere contact, long-term exposure or unreasonable application of medical furniture will destroy the furniture ......Cracked wood is too conventional, because the ambient humidity and ambient temperature of the gas are different, so the wood will also be accompanied by heat expansion and cold contraction, but the boiled wax is much better. And the selection of mahogany furniture furniture will be much stronger than other furniture in terms of disposal.

Many processing techniques will cause cracking, such as wood joints that are not strengthened after jointing, such as adding nails or falcons to the internal structure to strengthen the tensile strength after splicing. The wood itself is cracked, and many processing techniques will add a layer of Aosong board to the surface layer and then do the sealing paint processing process, but the Aosong board obviously does not have the grain of the solid wood board, but there is nothing wrong with the crack prevention. This is also a matter of processing technology.

At the same time, some wood is born with the root cause of cracking, such as solid wood and insufficient flexibility, such as ash wood is harder and less flexible, while beech wood is more flexible, and the wood texture itself is fine. As long as it is of course cracking, it is not easy to affect the normal application under normal conditions, so please do not panic.

Solution Talking about simplicity, but you also have to have special tools, it is not easy to have this kind of technical professional special tools at home, such as sanding sandpaper, sawdust particles, paint, which are not usually at home, especially eyebrow filling, it is difficult to adjust to the tone you want if you are not an expert. This is a technical professional industry, and the field is called Furniture Beauty Instructor. Solid wood furniture is solved by laser cutting and drying in the production process, and it is inevitable that there is an imbalance of thermal stress or part of it is not released thoroughly, which is related to the production and processing of the processing plant and the level of production and manufacturing, but it is difficult to test.

Second, cracking of solid wood furniture is related to improper application by consumers, such as placing it in an area exposed to natural light, or being too close to an electric heater in winter and cooling air conditioning outlets in summer, which may lead to cracking of furniture.

Third, the furniture produced in the southern region is not in line with the application of soil and water in the northern region, and the weather in the northern region is too dry, and the balance of wood moisture content is also easy to cause. Solid wood furniture should be protected from long-term exposure to sunlight, and long-term exposure to the sun will easily lead to cracking of solid wood furniture, so general solid wood furniture should be prevented from being placed near the window. Therefore, solid wood furniture should pay attention to maintenance, the probability of good cracking is much smaller, to prevent direct sunlight, ** air conditioning mouth blowing, when dry, often wipe with a wet rag.

When the furniture is used for a long time, the surface layer should be wiped with wood wax oil every year to seal the surface layer and avoid excessive water outflow.

Why does solid wood furniture crack? How can I remedy it on a daily basis? Solid wood furniture will crack after a long time, because long-term use will cause wear and tear to cause changes in wood, in daily life can buy wood glue repair.

Wet or dry and other environmental factors, each region has different weather characteristics due to the factors of geographical environment, but the moisture content of solid wood furniture in each region is different, such as the northern region generally controls the water content of 12%-13%, and the southern region is about 14%, so you can understand why some southern solid wood furniture is transported to the north after cracking and other phenomena. If there is already a large crack then it will be more troublesome to remedy, first you need to cut some crumbs, you can use books and newspapers that you don't usually use, and then add water with appropriate alum, boil it into a paste over low heat, and we can wait for solidification in the crack gently. It usually cools completely after 24 hours, and we just polish it lightly with fine sandpaper.

It is because you don't usually pay attention to maintenance, so it will crack, and you should put a sticker or paint it in your daily life.

Furniture produced in areas with high humidity, even if the dried wood will absorb moisture in the air during the furniture production process, and then transported to the north for use, especially in the northern winter, the air is dry, the indoor temperature is high, and the furniture is prone to dry cracking, so when buying furniture, consider the origin of furniture as much as possible in line with the local climate, and humidifiers can also be added indoors in northern winter. Solid wood furniture.

In the northern region (Qinling, Huai River.

To the north), it is easy to crack, the climate in the north is dry, and many families use heating to bake in winter, and solid wood furniture is more prone to cracking. It can be said that temperature and humidity are the decisive factors affecting the cracking, swelling and deformation of furniture. The volume of dry wood shrinks, the volume of wet wood expands, and when the temperature and humidity are unbalanced, it will cause cracking and deformation.

The climate is different, the moisture content of solid wood.

There are also differences, which are related to geographical differences, the moisture content of solid wood in Beijing is generally around, and the moisture content of its furniture is in4%;The moisture content of southern timber is even higher, at 14%. Therefore, when solid wood furniture from the south is used after it is transported to the north, cracking will occur.

Reason 3: Improper use. And then cracking.

If the moisture content of the log is not well controlled, there will be quality problems such as cracking and deformation in the later stage. After the furniture is produced, the moisture content of the wood determines whether the shape and material of the furniture will change again. Therefore, it is very important to control the moisture content of solid wood furniture, and the balanced moisture content will not crack and deform due to environmental factors such as sunlight, overcooling, and overheating.

Cracking of solid wood furniture is caused by shrinkage of water and wind, generally solid wood furniture construction will be much better when drying, brush paint back cover, solid wood furniture cracking is not much of a problem, commonly used wet rag sassafras to maintain air humidity.

And the temperature should not be too different, the temperature difference is too large, it will crack, cracked furniture can find a beautician.

Fu can repair it, and the general furniture beautician can fix this problem.

That's because the temperature inside the house is too high and very dry, so the wood will crack if you are in such an environment for a long time.

It's because of the nature of wood, these woods are very bad, and it takes a long time for them to crack, which is also a normal phenomenon.

Because solid wood furniture is not ventilated in the room we decorate, then they will cause dampness, and when the weather is hot, it will crack, which is a normal phenomenon.

It may be that the climate is too dry, and when the climate is dry, the solid wood furniture will crack.

When it comes to buying furniture, many users prefer to choose solid wood furniture. Compared with furniture made of other materials, it has good environmental protection, natural health, clear and natural texture, and good decoration, so solid wood furniture has been deeply loved by consumers. However, some solid wood furniture will crack, bend, deform and other phenomena after being used for a period of time, why does solid wood furniture crack?

Let's take this question and let's understand why solid wood furniture cracks!

Why does solid wood furniture crack.

1. The natural characteristics of wood.

As we all know, there are many types of trees, and their knotting and cryptostructural composition are different, and even if they are the same kind of tree, the properties of its various parts are not uniform. In other words, wood itself is an unstable material, even if it is the same tree species, the same tree, because of the different positions of the sawn timber, their wood properties will not be exactly the same. When the humidity in the air changes, the moisture in the wood will increase or decrease, resulting in expansion or contraction, and the solid wood furniture will be deformed and cracked.

2. Processing of furniture.

Due to the different production processes and different machinery and equipment used by each manufacturer, whether it is in the processing process or the structural design of furniture, manufacturers will more or less have some improper treatment, which will cause the deformation and cracking of furniture later. For example, poor drying quality, thorough drying, large difference in moisture content or insufficient health cycle will cause the stress remaining in the wood to act, thereby causing the wood to crack or deform.

3. Furniture use.

Even if you buy good quality solid wood furniture, if it is not used properly, it is easy to deform and crack after a long time. If your furniture is placed in a place that is too dry, damp and exposed to the sun, it is easy to change the moisture content of the wood itself, which can lead to cracking and other problems. In addition, if the solid wood furniture is placed unevenly, it may also cause its overall frame to deform, and the door panel will also be deformed due to uneven force.

How to maintain solid wood furniture.

Before we buy solid wood furniture, we must not blindly choose, we should choose the right tree species of solid wood furniture according to its use environment. For some areas with high temperature, humidity or sun exposure, it is not recommended to use ordinary solid wood furniture, and we should choose more stable quality wood according to the environment used. For solid wood furniture, we should pay attention to keep them away from strong light, and it is best to maintain the furniture regularly, and dust and clean or wax it in a timely manner.

Furniture will crack, it is likely to be caused by improper preservation, such as often placed in a place with sufficient sunlight, it is easy to fade the paint surface, cracking, placed in a humid place, there will also be such a situation, and the maintenance is not in place, there will also be cracking, so if you buy solid wood furniture, you must do a good job of maintenance, so that it can be maintained for a longer time.

In order to better balance the moisture content in the air, dry gases are continuously digested and absorbed from the wood. And then balance each other. In this link, it will of course crack.

Disintegration is the whole process of the release of wood, and playing with wood is the idea of wood cracking. Generally speaking, the key reason is that due to the weather, there is a difference in the ambient temperature and humidity of the home, which leads to changes in the moisture content of the wood, so there will be cracking and deformation, and the burden on the furniture changes greatly, and it is very likely to crack.

It is caused by the basic principle of heat rise and cold contraction of solid wood furniture, and belongs to the weather phenomenon of nature. Because of the weather changes in nature, solid wood furniture will also suffer from harm, especially of course sudden changes, which is very harmful to solid wood furniture, especially very easy to lead to cracking or deformation. Solid wood furniture will also be like people, due to some climate problems and get sick, especially high temperature weather high and low temperature, after the summer and autumn season, will lead to a large change in the moisture content of solid wood furniture, resulting in wood cracking.

The cracking of solid wood furniture is caused by the climate, and the change of the four seasons will inevitably lead to the rise or decrease of the ambient humidity in the air. At this moment, many solid wood furniture will generate heat and shrink cold, resulting in cracking. There is also a point that many workers in the production and processing of wood may lead to cracking of solid wood furniture due to shoddy quality, and its cracking due to poor application and maintenance.

Don't worry about how to crack solid wood furniture, you can do some preventive measures after cracking, so that solid wood furniture is intact.

Prepare some waste newspapers in advance, cut them into crumbs, and then add an appropriate amount of Ming Gong to the crumbs and stir well. Pour the mixture of shredded paper and Ming Gong into the prepared utensil, add plenty of cold water, and mix again. Put the tank on a slow fire, boil it until it is viscous, add the cooked viscous mixture to the gap between the solid wood furniture, and of course blow dry it to carry out the rescue.

Common problems with solid wood furnitureSolid wood furniture should be polished, waxed and polished frequently. If you touch dirty areas, scrub gently with a soft cotton cloth as much as possible.