What to do if the nib is loose and the nib is too thin

If you don't remove anything, there should be no big problem, re-install it, it should be OK, carbon ink is useless to use hot water after blocking the pen, because carbon is insoluble in water, so, it is generally not necessary, and carbon is not recommended.

Hello: I have encountered the same problem as you, at this time, do not pinch the nib and other actions will damage the nib, because the shape of the nib changes may not be able to produce water. Try pulling a hair in and out of the middle line of the nib, which can bring out the clutter that is clogged up there without damaging the nib.

It works, hope your pen will be fixed!

Knock hard twice with a stone, and you can buy a new one the next day. This trick tells the old not to go, and the new not to come.

Here's how:Place the nib on a hard surface, for example, you can put a piece of paper on a table, and gently press the nib with your fingertips. Hold the nib and shake it from side to side for about 5-10 seconds.

Check that the nib is aligned, and if it still doesn't, repeat step 2. Doing so may cause the nib to bend slightly, and if necessary, place the nib in reverse and place your fingertip on the tongue on the back of the nib for several consecutive presses.

If the nib is too rough, or the inside edge of the iridium is a little too sharp, you can make it smoother by lightly sanding the nib. Note that you should try the methods mentioned above first, and if you still can't solve the problem of scraping, then consider sanding.

Grinding a damaged iridium or nib with an iridium misaligned nib will only make the problem worse. Grinding tools can be very fine grit buff sticks, mylar, or micro-meshe, but grinding a nib is a very advanced operation and is not recommended to try without a lot of research and preparation.

Now the general nib is according to EF, F, M, B in the order from fine to thick, many domestic pens are not marked because most of the domestic pens are thick, the outer pen, the pen EF is probably but generally thicker than the domestic pen.

Japanese pens don't have EF, their F tip is probably, MF is, M is left and right, and the fluidity of the ink and the size of the water out of the pen itself will affect the thickness of the stroke.

According to your budget, you can buy Baile 78g, to F tip, this pen just started with the approximate thickness, after writing thousands of words with it, it is probably on the thin side. It's usually 35 yuan, and it's best to have another 20 yuan with an inking device, which is within your budget.

Either add a little budget, 120 yuan can be purchased online to the hero 100, a little thicker than the thicker, but there is no problem with climbing a small lattice for daily use.

Hero 100 has two kinds of medium and extra-fine, extra-fine, generally if you don't want to use it for annotation or accounting, or buy the medium-fine, it's no problem to climb the grid every day.

1. The main reason for the dry tip of the fountain pen is that the water guide groove on the pen tip is blocked, if the fountain pen is useless for a long time, or there are too many debris in the ink, then this situation may be caused.

2. You can take out a tissue to wrap the tip of the pen, pinch it with your hand, and then pull the nib outward, if the structure of the pen is not very special, you can generally pull it out.

3. Then you can easily pull out the water guide rod, and after pulling it out, you can clearly see that there is a lot of ink dried residue left on it.

4. At this time, you can rinse and soak the nib and the water guide rod of the pen with warm water, carefully clean the hard slag on it, and then wipe it dry with the napkin.

5. Finally, you can put the tip of the pen on the water guide rod of the pen, restore the previous appearance of the pen, and feel more stable, so that the problem of the dry tip of the pen teacher will be dealt with.

Modern fountain pens, due to the exquisite manufacturing technology, are relatively smooth when writing, and people often ignore its maintenance. In fact, fountain pens, like any machine, not only need normal maintenance, but also some spare parts need to be replaced after a certain period of time. Developing good maintenance habits is the most important factor in making the pen live longer.

The following maintenance methods can make your love pen get the best protection. Ink residue on the nib Due to regular use, some ink residue often accumulates at the junction between the nib and the tongue, which can be gently brushed off with a soft brush. Poor Writing If the pen does not write well or does not flow smoothly, you can first soak the pen in warm water for a period of time (about half a day), at which point the dry ink residue that clogs the ink extraction system will melt and be discharged.

If there is still a feeling of unsmooth writing after that, then it is best to send it back to the original factory for someone to deal with. The body of the pen loses its luster When it comes to the body of the pen, it will make people think of the problem of material, whether it is made of any material, after a long period of use, it is inevitable that there will be scratches or tarnishe, as long as it is not too serious, usually after being sent back to the original factory, it can also be polished and repaired. The usual maintenance should prevent it from rubbing and colliding with hard metal parts, avoid contact with acidic and alkaline solutions, and wipe it frequently with a soft cloth to keep the pen body always new.

However, it should be noted that the fountain pen should not be exposed to high temperatures for a long time, otherwise the pen body will be damaged, and some will even show a marking-like color.

Newly bought fountain pens generally have wax on their nibs, which need to be scalded in warm water to melt the wax. Otherwise, it will cause blockage, and the nib will not go into the water. If it is a pen that has been used before, it is recommended that you pull out the tip of the pen and wash it well, because not all ink quality is ***, and the ink will deteriorate after a long time, and impurities will be generated at the bottom of the ink bottle.