Want to buy an advertising engraving machine? What brand is Chili and Red Sail?

That has not been used, do not comment, I used Jinan Qili, specifically for advertising, bought at the beginning of this year, Jinan manufacturers are quite a lot, so when I bought it, I went to see it, the scale of the manufacturer is quite large, the machine has not been used until now, the initial machine operation is not familiar with some do not understand, play ** to them are very good to solve. Hope it helps.

Vdiao miniature engraving advertising engraving machine.

Function introduction VDIAO micro engraving advertising engraving machine body adopts integral casting, not easy to deform, high precision, three axes using imported linear square guide rails, high precision, large bearing capacity, stable operation, three axes are imported ball screws with high precision, accurate knife. All three axes are sealed to reduce dust ingress. It is suitable for the production of advertising signs, logo production, acrylic cutting, a variety of advertising materials and decorative products; It can carve all kinds of molds, wood molds, aviation wood molds, propellers, and automobile foam molds.

Technical Parameters Product Model.

vd-6090

vd-1312

vd-1318

Working width (mm).

Maximum running speed (mm min).

Maximum processing speed (mm min).

Mechanical accuracy (mm).

Repeatability (mm).

Gantry height (mm).

Drive mode: step-by-step micro-step drive.

Spindle power (kw).

Spindle speed (rpm).

Spindle cutters. Engraving commands hp-gl, g-code

Working voltage: AC 220V 50Hz-60Hz

Professional advertising, all choose the god painting laser.

Shandong's machine, it's okay to do cutting, after all, the price is low. Can't be too demanding. I have Jin Chaoxing, and I also have Shandong.

Liaocheng Huayuan is good, you can learn about it.

Jinan Qili brand is good, you can take a look.

Jinan Super Star is OK.

Shandong machine at a glance knew that the 1224 was eliminated

The engraving machine for the hummingbird I bought is very good. I didn't understand it at first, and I was afraid that I wouldn't be able to buy it. I feel that the configuration is high, and the most expensive is the best.

Their boss is very real, I don't need that much power for engraving, so I told me that I don't need to buy that much power. So I believed him, okay, saved a lot of money. It's very affordable.

Less money than I had planned to spend.

1325 machine, I think Xingtang's is good, I use it well, the power is high, the carving of the Yake vertical plate is not difficult at all, the only shortcoming of the high-power machine, the lettering should be watched, otherwise it will jump the word, and there is a bad way to engrave the chest, mainly depends on what work you take!

Jinan Jinwei Technology Development **** welcomes you to call us.

You can look it up online and see which one has the best reputation and then make a decision.

Jinan Sumite Machinery and Equipment****.

There are two kinds of laser machines and wood carving machines for advertising, and the laser accuracy is low and cheaper. Where are you? There are many Dongyang mahogany with this brand. You look at it online.

It's not clear what you're for! However, the accuracy of the advertising machine is very low, of course, ** is very cheap!

V-shaped knives, used to make large characters, such as calligraphy font signs, etc.

Uses of other knives:

1. Single-edge milling cutter, used to cut acrylic materials, characterized by the shiny cutting surface, if there are no special requirements, no need to polish.

2. Double-edged milling cutter, used to cut acrylic, MDF, etc. The cut surface is smooth, but there is no gloss.

3. Column knife, used to cut acrylic materials, smooth side, no need to press the plate. In addition, the post knife can also be used for marking, back carving, etc.

4. Sharp knives, used to carve words, reliefs, back carvings, badges, etc.

Chamfering knife, 3D knife, 3D in Wentai engraving is used in this knife.

Inclination hypotenuse or a knife for three-dimensional engraving.

I know that Hebei Province Dacheng existing production of advertising engraving machine manufacturers, I bought a very easy to use, is 1325 type, ** is 13000 yuan, their after-sales service is in place, contact yourself.

Remember to adopt it.

Hello, I am a engraving machine manufacturer, the production level of the engraving machine of the manufacturer is about the same, the key depends on the quality of after-sales service, 1325 advertising engraving machine is generally about 30,000 to 40,000, you can come to our factory to investigate.

There is no hard and fast rule about what kind of knife to use. If I want to carve, a 22-bladed 4mm long cutting knife can be put very fast. 3cm is also 4mm, and the blade length is 4cm.

In fact, I can pass, but considering the quality and processing speed of domestic tools, I basically choose 4mm tools).