Hello! Where did the filter come from? Does it have an impact on the use of washing machines?

It is generally at the bottom to prevent small things from entering and exiting the water hole or entering the water hole, resulting in blockage.

Summary. Hello, when cleaning the washing machine, it is better to remove the filter and wash it separately. After all, the purpose of the filter is to filter out impurities from everyday clothes, and it is best not to come into contact with the cleaning agent.

The filter of the washing machine can filter out the debris on the clothes and prevent the drain from clogging. Therefore, when cleaning the washing machine, it is necessary to take out the filter bag.

Do you want to remove the filter of the washing machine.

Hello, when cleaning the washing machine, it is better to remove the filter and wash it separately. After all, the purpose of the filter is to filter out impurities from everyday clothes, and it is best not to come into contact with the cleaning agent. The filter of the washing machine can filter out the debris on the clothes and prevent the drain from clogging.

Therefore, when cleaning the washing machine, it is necessary to take out the filter bag.

I hope mine is helpful to you, please give a thumbs up if you can Thank you! 

Most likely if you don't have this filter installed.

In fact, there is a slot in the filter, and you can press it in.

It is also said that there is a kind of bayonet that is used, if this bayonet is broken, Zheng Closed, then this filter is not fixed.

The washing machine filter can't filter dirty things, you can double-check whether the filter is broken, whether it is reversed, or simply replace it with a new one.

It may be because the filter is damaged, you can try to change the filter of the same model to see if the situation has improved. If not, there should be a problem with the washing machine filtration system, and you can go to the relevant personnel for on-site maintenance.

There is an impactThe function of the filter screen is to filter and collect the debris in the water in the washing machine to avoid the failure of the washing machine caused by the jamming of some items. Filter installation: If the filter is loaded above the inner barrel of the washing machine, it can be installed in place by pressing down on the left and right notches.

If the filter is in the middle of the washing machine, Chi Qing needs to insert the lower side of the pin under the inner barrel, and then press and hold the thumb, and the plastic above the groove can be inserted into the upper bayonet.

Extension: Washing machine filter cleaning method.

1. When cleaning, pour the amount of water in the kettle into an empty container with descaler, prepare it according to the ratio of descaler and water 3:2, and then stir evenly. Pour the mixed descaler solution from the detergent addition box.

Then press the power switch of the washing machine, set the program to "Washing Program" to rotate the washing cylinder, wait until the descaling liquid is discharged from the drain pipe to the barrel, and then add the discharged descaling liquid from the detergent addition box, and repeat many times until the program is completed, open the filter and clean the filter screen of the washing machine.

2. If the filter is above the inner barrel of the washing machine, pinch the filter slot by hand, pull it up to remove it, take out the wire chips in the washing machine filter, and then rinse the washing machine filter with water.

The analysis can be carried out as follows:

1. The main function of the filter is to prevent the drain from clogging and not to filter the debris in the clothes, so it is useless;

2. The filter screen plays the role of filtering suspended fibers. During the laundry process, a lot of the fibers of the laundry will come off the laundry, and without a filter, it is easy to get stuck in the drain valve.

3. For this reason, this device was designed. In the washing and rinsing process of the machine, a part of the suspended capillary fibers are removed by allowing a part of the water to pass through the filter device using the principle of water flow.

4. It should be noted that this device needs to be cleaned regularly. The cleaning method is very convenient, remove the filter, remove the dirt, rinse with running water, and then you can reset the installation.