What is the reason why the wave of the washing machine washing barrel can only turn when it moves?

If this situation occurs, it is likely to be due to a problem with the motor, a problem with the computer version, and a scumbag, so you must pay attention to this aspect.

The washing machine can only be rotated with the manual help of the washing barrel, which must have a problem with the motor and need to be repaired by the repair department.

The washing machine washing bucket wave can only rotate when it moves, and lubricating oil is needed.

The washing bucket wave of the washing machine can only be rotated when it rotates.

First check if there is a place for a card under the washing bucket.

Secondly, check if the starting capacitor of the washing machine is normal?

This is normal.

If the inner barrel is rotated in a clockwise direction, it means that the brake device of the clutch is broken; If the inner barrel is rotated in the counterclockwise direction, there should be a problem with the clutch torsion spring; All in all, it's a matter of the clutch.

Hello, the wave wheel of the washing machine washing bucket can only turn when it moves, which may be because there is a jam inside, and it can only be turned when it is moved.

If you find that the washing wheel of the washing machine can only turn when it moves, it must be that the belt is a little slippery, and the belt can be replaced.

The washing machine's spinning bucket needs to be moved to turn because the washing machine drum is stuck inside, so you need to open the washing machine shell to clean out the debris inside.

If you find that the wave wheel is enough to rotate after moving, it should be that the belt is slippery and you can change the belt.

What is the reason why the wave wheel of the washing machine washing barrel can only turn when it moves? Even if you know that the reason why the wave can only turn when the wheel is moving, it may be a start-up obstacle, so please ask a professional to take a look or consult the after-sales service.

Determine whether the motor lacks lubrication or the clutch is damaged.

When washing clothes, the wave wheel of the washing drum can only be turned, what is the reason? That's already a problem, if you can't take a break, it's better to find someone to repair the washing machine.

I don't quite understand what you mean, the washing machine is turned by himself, if there is really a problem, you can find someone to fix it.

Because the current mobile phone and the current washing machine are all intelligent, he is talking about the intelligence of that sector.

Hello, it may be caused by insufficient water pressure. Call the after-sales customer service, and they will deal with it as soon as possible.

If this situation occurs in the washing machine, it should be that the motor starting capacitor is faulty, and it is recommended to replace it.

The reason why you can't move to turn your own system may be that he is not tolerant, or that he is a problem, find a rest, and take a look at you.

When washing, the dehydration bucket rotates, usually because the clutch is faulty. During the inspection, it should be distinguished whether the dehydration bucket is rotating in a clockwise direction or in a counterclockwise direction, and then it should be repaired.

1. Causes of failure and maintenance methods for the clockwise direction of the dehydration bucket:

1) The brake band is loose.

Due to the loosening of the brake belt, the braking torque of the brake belt on the dewatering shaft is reduced, at this time, the brake belt should be disassembled and repaired, and it can be reinstalled.

2) The brake band is worn or damaged.

When the belt is worn or damaged, the braking effect on the dewatering drum is completely lost. At this time, the pawl position can be adjusted appropriately by rotating the adjusting screw, and the braking torque of the brake belt on the dehydration shaft can be increased.

2. Fault causes and maintenance methods for the counterclockwise direction of the dehydration bucket

1) The clutch torsion spring is damaged.

Due to the clutch torsion spring falling off, breaking or the torsion spring and the dehydration shaft are too loose and slipping, the torsion spring loses the function of non-reversal. At this time, the torsion spring should be removed and reassembled or replaced with a new one.

2) The clutch brake band is damaged.

Effective braking of the dewatering shaft is not possible due to loose, worn or broken clutch brake bands. Re-tighten or replace the brake strip at this point.

3) The clutch spring elasticity becomes weaker.

Weakened elasticity of clutch brake springs or fork springs can lead to dehydration and rotation, and the only way to replace them is to replace them with new springs.

The barrel in a fully automatic washing machine rotates with the wave wheel for the following reasons:

Something is stuck or damaged.

A faulty clutch or a dropped washing machine causes the drivetrain to be misaligned.

The computer board is damp.

The sensor wiring plug-in is in poor contact or the wire is bitten by an insect.

Damage to the computer board, etc.

You can rule out the above situations one by one, or contact after-sales service to let professional masters come to check and repair.

1. The brake belt is loose, so that the braking torque of the brake belt on the dehydration shaft is reduced.

Solution: Reinstall the brake belt.

2. The brake belt is seriously worn or damaged.

Solution: The position of the pawl can be adjusted appropriately by rotating the adjusting screw to increase the braking torque of the brake belt on the dehydration shaft, and the brake belt should be replaced in serious cases.

3. The torsion spring of the clutch falls off or breaks or the torsion spring and the dehydration shaft are too loose and slip, so that the torsion spring loses its anti-reversal function.

Solution: Reinstall the torsion spring or replace the torsion spring, and replace the reducer in serious cases.

4. The clutch brake belt is loose, worn or broken.

Solution: Re-tighten or replace the brake band.

5. The clutch brake spring or fork spring is too soft or broken.

Solution: Replace the clutch brake spring or fork spring to solve the problem.

The inner barrel is turned. If it does not turn, it may be because: 1. The air pressure switch is in poor contact.

2. The washing machine is not stable. 3. The panel door of the washing machine is not closed well or the switch is not in good contact. 4. The drain valve does not pull the clutch switch apart.

5. The motor performance is poor and the capacitor is damaged.

The inner barrel is turned. If you don't turn it, it may be because:

1. The strength of the motor to the clutch pulley is not enough, and it is not dehydrated, or the dehydration is weak.

2. The clutch can be spring embroidered or the performance is poor.

3. The computer CMOS ROM curing program is damaged.

Suggested Solution:

1. If in the dehydration state, only the wave wheel rotates and the inner barrel does not rotate, at this time, it should be checked whether the traction has separated the pawl and ratchet wheel of the clutch.

2. If the nut of the adjusting rod on the drain valve is loose and worn, resulting in insufficient opening distance, the distance of the adjusting rod should be readjusted to separate the pawls and ratchet wheel of the clutch.

3. Check the air pressure switch to see if it is a poor contact.

4. Put the washing machine in a relatively stable place, and tidy up the clothes before washing the clothes before starting the washing machine.

5. Check whether the panel of the washing machine is in poor contact or whether the switch is in poor contact.

6. Replace a motor with better performance, or replace it with a new capacitor.

7. Increase the strength of the motor to the clutch belt pulley to make the dehydration more powerful, which can solve the problem of the inner barrel not rotating.

8. Check whether the spring in the clutch is rusty or whether the performance is not good enough, not to mention that it is rusty or has any other faults, replace it with a new spring.

Hello dear 1, maybe the sound insulation board on the balance column of the washing machine is not installed. 2. It may be that the clothes are not evenly placed, which causes the washing machine to shake badly. Suggested workaround:

1. The dehydration and shaking of the washing machine is terrible, mainly caused by the unbalanced placement of clothes. When the clothes are placed unbalanced, the centrifugal force generated when the spinning bucket rotates at high speed will cause the washing machine spinning bucket to vibrate very much, and the abnormal sound is also relatively large. When placing clothes in the dehydration bucket, place them evenly around the circumference of the bucket, and gently press it with your hand, and then close the inner lid of the dehydration bucket.

2. The shaking is likely to be caused by the removal of the bolts of the cylinder body of the washing machine, which is used to prevent the washing machine from fixing the heavy cylinder barrel during transportation, so as to protect the shock absorber and not disassemble it. 3. It is possible that the sound insulation board on the balance column of the washing machine is not installed, and the sound insulation board needs to be installed, and the problem of shaking of the washing machine will be solved. If it still can't be solved, then you need to ask a professional master to repair it.

1. The reason why the inner barrel does not rotate when the automatic washing machine is dehydrated:

2. The air pressure switch of the washing machine is in poor contact or damaged.

3. The washing machine is not stable.

4. The panel door of the washing machine is not closed properly or the switch is not in good contact or damaged.

5. The drain valve does not have a clutch.

The conversion pulls apart. 6. The motor is burned out or the performance is poor, and the capacitor is damaged.