-
Hello, wifi signal regardless of whether there is a network mobile phone and other equipment can be connected, the user can not use the network after connecting to wifi, first confirm whether your broadband line is smooth, you can check whether the indicator light of the broadband cat has LOS red light flashing, if there is a broadband failure, so the router's wifi can not use the network, at this time, the user can call the operator's customer service to report the fault processing, after the fault report, there will be staff to come to the door to troubleshoot.
If the broadband modem can be connected to the network normally, then it is a problem with the router, and you can check whether the network cable is connected correctly. If the network cable between the broadband modem and the router is normal, you can restore the router to its factory value, and then reset the router parameters to see if it can be restored to normal
2. Then open the browser and enter the management address and login password of the router.
3. After logging in to the background, click the setup wizard, and then fill in the corresponding parameters according to the wizard instructions.
<>6. After the wireless setting is completed, click Save, and then restart the router to use it normally.
-
If you are using a Huawei phone, you can perform the following steps:
1. If you are using a home network, it is recommended to connect to other WiFi or mobile phone personal hotspots for testing and troubleshooting
1.If connected to other wifi is normal.
1) Please do not stay away from the router;
2) Please check whether the broadband account expires, restart the router and restart the phone before trying;
3) If the router has been set to the blacklist and whitelist, you need to check whether the MAC address of the mobile phone is added to the router, if the router does not set the blacklist and whitelist, please power off the router and restart the attempt.
2.If you connect to other wifi, you can't get online.
1) Please turn the WLAN switch back on and try to connect;
2. If you are using a public network:
1.Try using it in a place with a small amount and confirm that the hotspot is working properly.
2.Please check if you need to log in through a browser** to register before you can access the Internet.
3. If individual applications are not available online:
Please open Settings, enter Traffic Management in the search box above and click to enter the Traffic Management page, click Application Networking, and check whether the WLAN permissions are checked for individual applications.
-
Why does the mobile phone show that it is connected to WiFi, but it can't connect to the Internet?
-
You check to see if there's anything wrong with the router. If it's normal, it's probably a problem with the photoelectric cat, you call **Ask the broadband service provider to see if it's in arrears.
-
If you use a vivo phone, it means that the mobile phone is connected to wifi normally but cannot access the Internet
1. Check your phone's settings.
Go to Settings --WLAN and check if the wifi has been successfully connected.
Go to Settings - Other Networks & Connections - Private DNS to see if Private DNS is set, if so, it is recommended to set Private DNS to off and try again.
2. Check WiFi
Please compare whether the same wifi connection is normal with other mobile phones, and confirm whether it is the wifi or mobile phone. If it is due to Wi-Fi, please restart the wireless router to check. Some public Wi-Fi networks require browser authentication before they can connect to the Internet.
3. Check the network permissions.
Please go to iButler - Traffic Management Traffic Monitoring - Network Management - WLAN - Turn on the Internet Permission of Fool Training.
4. Check the environmental causes.
If the phone is far away from the router, although the wifi signal is displayed, it may not be able to access the Internet, it is recommended to adjust the distance between the phone and the router before trying.
5. Reset the network settings.
Make a backup of wifi and other data, go to Settings - System Management - Backup and Reset - Reset Network Settings - Reset Settings, and then use it to view.
Note: Resetting the network settings will clear the connection records such as Wi-Fi, mobile data network, Bluetooth, etc.; If you have dual SIM, you need to select the corresponding SIM card.
6. Reset all settings (do this when you can't see the reset network settings menu).
Note: This action will not delete the software or files, only reset all the settings; For data security, you can back up important data before operation.
7. Service center testing.
If the above methods fail to solve the problem, please back up the data of the mobile phone in advance, and go to the vivo customer service center for testing with the mobile phone and purchase voucher (customer service center address: enter the vivo official website vivo**app--my--service outlets, after-sales outlets--select the province and city to query the customer service center address).
-
Why is the mobile phone connected to wifi with a display, but the core of the ambush digging is not connected to the network?
-
If you have access to a wireless router;
We reboot the wireless router; See if you can solve the problem; In most cases, you can solve the problem that your phone can't connect to the Internet.
to choose to have your Android device ignore the network and add it again.
2.Check if the wifi password is correct. When the wifi password is changed, you need to re-enter the password to connect to the wifi
3.Check the WiFi advanced settings. Enter the advanced settings of the Android phone's wifi to set the relevant settings.
Set a static IP address for Android devices. This means that the user needs to be careful about whether there may be a DHCP address assignment issue on the connected router, or the device has received the wrong address.
4.Turn off the wifi hibernation policy on your phone.
[Extended Materials].
Turn off and restart the Wi-Fi connection.
If you use your phone to surf the Internet, the phone will keep a network IP address assigned by the Wi-Fi connection, it will be applied to the current Wi-Fi, if there is no address conflict, you don't have to worry, if there is a conflict, you have to close and restart the Wi-Fi connection. Here's how: Open the phone menu, enter the "Settings" bar, select "Wireless & Network Settings", enter the "Wi-Fi Settings" item, select "Turn off Wi-Fi" in the new window, and after completing the shutdown operation, re-enter the broadband file to do the project, and select "Turn on Wi-Fi" to restart the Wi-Fi connection.
-
When you still can't access the Internet when you connect to wifi on your mobile phone, you should first rule out the problem of the network and check if it is a mobile phone? But the problem, if it's a problem with the phone, Hua restart the phone, or disconnect the network again, if it's the network, then, you need to reopen the network and connect all the passwords again.
-
Hello dear! I have seen your question on my side and am trying to sort out the answer, and I will answer you later, please wait a moment
Questions. Hurry up and hurry.
Hurry up. 1.Check whether your mobile phone number is in arrears; 2.
If you have just paid the fee, please turn on and off the test again; 3.Confirm whether individual ** cannot be accessed or all ** cannot be accessed, if only a few ** can not be opened, and the others** are normal, it may be**server problem, it is recommended to observe later; 4.If it occurs frequently, you can call the customer service of the local operator** and the staff will handle it for you.
Questions. I can't connect to my home, my home, and my wifi outside my home.
Confirm whether the wifi password entered is correct Confirm the English case, click the "eye icon" on the password input interface to check the password entered. 2.Reconnect the wifi Go to the phone settings - WLAN, long press the connected wifi, select "Forget Network", reconnect and restart the router Disconnect the router from the power supply, power on again after an interval of 10 seconds, and wait for the router to boot up and connect to the operator network (about 1 2 minutes is expected).
4.Check the router settings Check the router manual, enter the router settings interface to see if there is a restriction on the connection, if it is restricted, you will not be able to connect to wifi.
It is estimated that there is a problem with the authentication of your wifi, try to refresh the port.
The first possibility is that there is a problem with the service provided by the operator who provides us with the service, causing the network in our home to be disconnected and the wifi not working. If this happens, we can contact the carrier, file a problem, and resolve it.
Questions. Connect to the outside wifi, is it added, the name, and the password can be.
What's going on with the phone not being able to get online.
Yes. 1.First of all, turn on the router, the newly installed router wifi has no password, and the mobile phone can be directly connected to the wifi signal.
2.After the mobile phone is connected to the router, log in to the background setting interface of the router through the mobile phone browser, the router login address is on the back of the router, and the default is generally to enter the password of the router, and different brands have different passwords; Taking TP-Linx as an example, the password of the old router is admin, and the new router is generally empty by default, and you need to set a new password by yourself, which can effectively prevent others from tampering with the WiFi password of the router; Fill in the Internet broadband and password provided by the carrier. Yard.
-
This is caused by abnormal mobile network settings, first open the settings on the phone, then click General, then select Restore, click Reset Network Settings, and then tap Settings again after the phone restarts, click on the wireless LAN and select the wifi you want to connect, and finally re-enter the password, click to join.
-
The router network is unsuccessful, the broadband is faulty, and the router security settings are affected.
Problems in the above three aspects will cause the mobile phone to be unable to access the network after connecting to the router and wireless network.
To solve the above problems, you need to check the router networking status, check the router settings**, log in to the settings page after it is correct, check the networking status, and check whether there is a broadband problem.
-
If your mobile phone is connected to wifi, but you can't access the Internet, it's not your phone's problem, it's a wifi problem, which means that the wifi doesn't have network permissions, he just turned on the router, so in this case, you have to check the wifi Internet information, okay, how to connect.
-
The mobile phone can't connect to the wifi because the wifi signal is too weak, after the wifi signal is disconnected, you can connect it again.
-
If the wifi signal is full on the mobile phone or notebook, it only means that the wireless network established by the router is working normally and the signal is good, but it does not indicate the connection status with the external network.
In fact, the router is not connected to broadband even if it is turned on, and the phone will also display a full connection wifi icon.
If all wireless devices can't be connected to the network, it is an external network problem, check the link between the router and the modem, as well as the working status of the modem, and send a picture to see.
-
Logging out of the entire network and logging in to wifi with a password can solve this problem, and sometimes data embolism may cause the phenomenon of being unable to access the Internet even though it is connected.
-
If your mobile phone is connected to the wifi and there is no way to access the Internet, it means that your wifi has no speed or no signal, which is the reason for the communication office, and it has nothing to do with you.
-
The mobile phone can't connect to the Internet, you should turn off the mobile phone, disconnect the system in the future, and reconnect it, so that you can make the system run normally. You can connect to the W blue one.
-
Restart your phone or restart your router.
-
The mobile phone is connected to the wifi but cannot access the Internet, and some mobile phones are only connected to the network, but the content in it cannot be used, which may limit the number of uses.
-
Make a study plan based on the learning objectives and stick to it. You can start learning from the beginning of the beginner's level by looking for new standard days for textbooks. There are still many schools where you can study.
-
What should I do if I can't access the Internet with a mobile phone? That must be your home's network is not good. There is a problem with the Internet.
-
Maybe the wifi is bad, try it again, it's not good, it is estimated that it is a mobile phone problem Take it to the store to debug it.
-
There is a high probability that the connected wifi is not connected to the external network, resulting in the inability to access the Internet. We recommend that you check whether the network is unblocked.
-
What should I do if my mobile phone is connected to wifi and cannot access the Internet? I think that under normal circumstances, the mobile phone can not connect to the wifi, it may be a problem with the network, you can re-check it.
-
It could be wifi no network.
Check whether the wifi binding is in arrears or whether the network cable is loose.
-
There are many reasons why the mobile phone is connected to wireless wifi and cannot be connected to the Internet, such as signal problems, mobile phone setting problems, router problems, etcIf the same wireless wifi only your mobile phone can not access the Internet, then the phone settings are wrong, the parameter error is the first problem to be solvedThe phone gets it done.
1. Change the DNS server address. In the wireless network settings window, find DNS...Click on the IP address to the right of the DNS and manually enter the new DNS server address
The DNS server address can be changed to the DNS server address provided by the broadband service provider, and if you don't know, you can search or ask the local broadband service providerYou can also change it to some third-party DNS server address, such as ...2. Change the IP address of your mobile phone.
If you are using a Huawei phone, you can perform the following steps: >>>More
1.First, disconnect the network cable from the company's wired router. >>>More
Why does the mobile phone show that it is connected to WiFi, but it can't connect to the Internet?
Take the Huawei P40
For example, under the EMUI11 system, there are many reasons why the mobile phone cannot connect to the wifi, the first may be that there is a problem with the mobile phone system, the user can choose to forget the wifi password on the mobile phone, and then re-enter the wifi password to connect and try. >>>More
If the mobile phone cannot access the Internet normally, you can troubleshoot according to the following conditions: >>>More