When laying bathroom wall tiles, should you choose wall press or ground pressure ?

The reason why the paving method of wall pressing the ground is to make the gap against the wall more beautiful, and many people think that this paving method can play a better waterproof role! So much so that we decorators are forced to follow this method for a long time to lay tiles, otherwise others will think that our technology is not in place. Leveling requires 2 3% of the inclined to the floor drain inclination, so when the wall is closed to the ground, the lowest piece of wall brick is reserved when paving first, and then embedded after the tiles are completed, which may require a little higher process and consume more man-hours.

Therefore, many teams have adopted the construction method of the ground wall surface.

<>First of all, put a brick at the bottom of the wall, the brick is suspended on the wall, and then paste it along the turn, this process is more troublesome, because there is no focus point at the beginning of the paste, so in the later construction process, it is easy to fall off and tilt, which will seriously cause the situation of falling off. The water flow of the bath can flow into the floor drain along the floor tiles, on the contrary, the practice of pressing the wall tiles on the floor tiles is easy to appear that the water flow will enter the cement mortar layer along the gaps, and it is easy to cause water seepage to the outer wall or downstairs at the ground or corner after a long time, and it will be more troublesome at that time.

As a practitioner, you can clearly tell you that the wall pressing the ground can not bring beauty, nor can it be waterproof, and may even have larger gaps, and it is not good-looking, which is the same as the horizontal and vertical water and electricity advocated by the decoration company, which is not of great significance, but simply makes you feel that it is professional and has the corresponding flexibility with the cement wall behind the wall tiles, to ensure that in the process of thermal expansion and cold contraction, the tiles are not squeezed. 2. If the wall tiles press the floor tiles, the water flowing on the wall will flow directly to the glazed surface of the floor tiles, and the water will not accumulate, but will flow into the floor drain.

If you choose to press the wall to the ground, the water on the wall will flow into the gap between the wall and the floor, and if it takes a long time, the water will seep into the sand and plaster layer under the tiles, which will cause the external wall of the bathroom to regain moisture.

Of course, the choice is to press the wall, because if the wall is pressed against the ground, the wall will be damaged when the leak is repaired.

It is better to choose "wall pressing", the way of "wall pressing" tiles not only has no gaps, but also will be more durable.

It should be the wall pressing the ground, because in this case, the height of the bathroom is very good, and it is also very reasonable, which will make people feel that the space of the bathroom is very large and empty.

When laying bathroom wall tiles, use "wall pressing.""It would be better to pave the construction process.

There are two ways to lay tiles in the bathroom, namely the wall and the wall, and it is better to choose the wall as much as possible when decorating. There are many decorators who don't like to use this way when decorating others, because they feel that this kind of decoration will increase the difficulty, but decorating with walls and floors will indeed have great benefits. The reason why the decoration master is reluctant to install is because the difficulty of the construction is slightly greater, and the choice of such a decoration method means that when the tiles are pasted, the tiles below may be in a suspended state.

In this case, there is no focus point when pasting tiles, so it is easy to fall off if it is not handled well, so most of the decoration masters are reluctant to do this. And the floor tiles of the bathroom themselves have a certain slope, so it is more difficult to use such a decoration method, so most decoration masters will choose to use a simple way to paste tiles. <>

In addition, the cost of decoration is also different, because the simple decoration can be completed in one day, while the more difficult point takes two days. There is a significant increase in the cost of manpower, so it costs more money to decorate. But don't be dissuaded by the price, you can think about what kind of effect will appear after the decoration is completed.

With a more difficult decoration method, the waterproofness of the renovated toilet will appear better, while the waterproofness of the simple decoration method is not particularly good. <>

If you use a low-pressure wall to decorate, then in the case of bathing or water on the ground, the water will flow directly to the ground along the gap between the floor tiles and the wall tiles, and in this case, a layer of stagnant water may be formed, and this layer of water will penetrate into various areas. Therefore, for the sake of the experience of housing, everyone should still choose to decorate with walls and floors as much as possible when decorating.

You should choose a strong pressure laying method, because this laying method has better waterproof performance for the toilet, and it will be more difficult to decorate and the cost will be relatively high.

Personally, I think the wall should be pressed, because if it is redecorated in the future, it will be very easy to clean and will not damage the wall, which will save time and effort.

I think we should choose the solution of ground pressure wall, because this solution can ensure that the wall tiles do not fall off, and can make the wall tiles more stable.

What are the differences between different paving methods for bathroom decoration tiles, wall pressing and ground pressing wall? The installation method is not the same; The wall is pressed to the ground is first pasted with tiles, the part by the road surface is empty first, and the floor tiles are pasted again. The floor pressure wall is made of tiles immediately after each wall tile is pasted, and one end of the floor tile can cover the wall tiles.

From the point of view of the difficulty coefficient of engineering construction, the wall pressing the ground is more complicated than the ground pressing wall.

The leakage problem is different; Since the toilet has frequent running water, water droplets from the walls will flow down the walls and onto the floor tiles. Because the wall tiles belong to the vertical situation, the road surface is not easy to leak. On the other hand, there will be a gap in the area where the wall and pavement work are handed over, and the water droplets on the wall will fall, which is very easy to penetrate into the cracks, resulting in water storage on the pavement.

Nowadays, however, grouts are used on the window edges, so leakage problems are rare.

Wall pressure has significant advantages over ground pressure wall, but the difficulty coefficient and cost of engineering construction are better first. Because the commercial land is pressed against the wall, only need to pave the wall tiles and then paste the floor tiles, this paving method is more convenient for the bricklayer master, without the whole so many processes, the wall tiles and floor tiles are paved all the way, which can save the master's time. But if you do this, the waterproof performance will be worse, because the bricklayer master has laid the floor tiles of the whole wall of the bathroom, and then the floor tiles can not be plugged in the gap of the wall tiles, only the exposed floor tiles are attached to the wall tiles.

And the wall of the bathroom is easy to have water, if you choose the wall to press the ground, the water will naturally flow into the floor tiles, and finally drain into the odor-proof floor drain. From the comprehensive analysis, it is easier to reasonably reduce the dry dust of water entering the internal structure of the floor tiles than the ground pressing wall, and the effect is more prominent. But be sure to talk to the decorator before paving.

ground pressed walls; When the walls and pavement are to be tiled, the wall tiles should be laid first. The main reason is that if the floor tiles are paved first, the whole process of waiting for the floor tiles to dry must consume a lot of time, resulting in an increase in the construction period - if the floor tiles are not dry, the tiles must be stepped on the floor tiles, resulting in the deformation of the floor tiles, the wall is hollow, and the wall is not leveled, and then the tiles are pasted. In that way, the bottom of the wall tiles will be blocked by the floor tiles, which is called the "ground pressure wall" people communicate well, otherwise they will basically choose the method of ground pressure wall paving.

The effect of decoration is different, the waterproof performance is different, the waterproof effect is different, the decoration style of the home is different, and the details are treated differently.

Different paving methods, the waterproof effect is not the same, and the aesthetics are also different, to choose according to the actual decoration style.

When laying floor tiles, there will always be a large gap between the floor tiles and the wall. This gap is not reflected in **, in fact, it is as wide as a child's finger. In addition to the unsightly gaps, the biggest problem is that it is very easy to store water.

Water from the floor will flow in, and water droplets from the walls will flow down. At the same time, the water in this place is difficult to remove and it is not very easy to dry, and it is really not an exaggeration to say that "there is water storage for a long time". Over time, not only will the gap turn yellow, but it will continue to stretch up along the gap in the wall bricks - so you can see that my wall base has already yellowed to the wall tiles.

Choose the paving method of the ground pressure wall, the gap at the intersection of the floor tile and the wall tile is longitudinal, and the gap at the corner line is horizontal. As we all know, the most important problem for waterproofing in the bathroom is that the water flows low, which indicates that the longitudinal gap is easier to soak than the horizontal one. No matter how much we do in the early days of waterproof engineering, no matter how much the floor tile paving processing technology is, in the natural environment of the bathroom, the water will also seep into the bottom of the floor tiles along the gaps, and in the long run, the water can not evaporate under the floor tiles, and gradually become alcoholic, and a pungent fishy odor will occur.

The selection of the wall and floor paving method can greatly reduce the amount of water infiltration.

Wall tiles pressed floor tiles: The water dripping from the wall immediately flows into the glaze layer of the floor tiles, and because the floor tiles will not be flat, it must establish an inclination to the deodorant floor drain, so this water is not easy to deposit, and eventually flows into the deodorant floor drain. In fact, these practices have always existed to show that they all have their own advantages, and there will be no saying which one is better than which, must choose the wall to press the ground, in other words, the ground pressure wall, which is different from the bathroom to do waterproofing must be done before the tile is done, for the final how to paste or need to see the love of the community owners to determine.

I have seen many decoration companies are basically the practice of pressing the wall, but the owners of the community do not like it very much, of course, it is changed to the ground pressing the wall, sometimes they decorate the master before pasting the tiles and ask the owners of the community which method they like, the master will paste according to which method, everything is decided by the customer. Relatively speaking, it is much simpler to choose the ground pressure wall, first pave the wall tiles and then pave the wooden floor, even if it is to catch water on all sides, it can also deal with the gap between the wall tiles, and it is not that our decoration master deceives the owners of the community for better convenienceIt is true that the actual effect of the two methods is basically the same, and the key is to look at the individual's technicality.

The wall is better pressed to the ground, which looks more beautiful and more durable. The difference between the two lies in the visual experience, the beauty presented to people.

It will be better to press the wall in the bathroom, and the difference I mean is whether to stick the bricks on the wall first, or the difference between the bricks on the ground first.

It is better to press the floor with a wall in the bathroom; The difference between the two is that the installation position is different, the practicability is different, the overall appearance is different, if the ground is pressed against the wall, the water surface will penetrate into the ground, which is not easy to take care of, and it is easy to cause the room to be damp and leak.

If you don't experience the renovation in person, there are many details that you can't usually think of. Of course, the so-called details, in addition to the hidden projects such as water and electricity, the way of tiling is also one of the details that are easily overlooked. Whether the tile is paved correctly or not will directly affect the later use.

There is a generally controversial question in the kitchen and bathroom brick laying area: is it better to press the wall or the wall?

First, if the wall tiles are pressed on the floor tiles, they should not be pasted from the bottom of the wall tile, but from the penultimate wall brick to the top, and then the bottom row of the tiles will be pasted after the tiles are paved, and it will just be pressed on the floor tiles. Wall tiles and floor tiles will be more complicated. If it is a floor tile pressing wall tile, the construction is to start from the bottom of the wall tile, and then spread it along the wall, and then lay the floor tile.

Second, the decoration of the bathroom will generally do two waterproofing, the first time to prevent the sinking part of the water, the second time to prevent the ground water, and the wall of the wardrobe to do waterproofing, the rest of the walls to do 4o to 5o cm high waterproof is enough. The waterproofing of the bathroom is an independent waterproof layer, which has nothing to do with the wall and floor tiles.

Third, there will be a gap between the wall tiles and the floor tiles, if there is water flowing down the wall, it may flow down the gap to the waterproof layer, which will be very troublesome for a long time. The bathroom is a very damp place, it is best not to use floor tiles to press the wall tiles, which is more beautiful from the visual effect, and the bottom tile is not easy to produce hollows. However, the gap between the floor tiles and the wall tiles will be relatively large, and the waterproof effect is not too good.

Fourth, the floor tiles are not directly on the wall tiles, and the tiles will not be squeezed in the whole process of thermal expansion and contraction. And the wall tiles are not easy to see the edge of the gap, we all know that the corners are the most difficult to take care of, so it will not affect the overall appearance.

Fifth, the benefits of wall pressing the ground are:

1. It doesn't look too big a gap, and the overall beauty is beautiful.

2. The waterproof effect is good, and the water on the wall will flow down and will be left directly in the floor drain along the slope of the floor tiles, but will not be left in the gaps. If the wall is pressed, water will flow into the cracks, and over time, it will cause mold and bacteria in the dry ash layer, and it will produce peculiar smells, which is difficult to deal with. Even, the moisture flows consistently along the dry ash layer to the doorway, causing the floor of other rooms to bulge and deform.

Sixth, is there a big difference between the construction of wall tiles and floor tiles and wall tiles?

In general, wall tiles and floor tiles will be more complicated. If it is a floor tile pressing wall tile, the construction is to start from the bottom of the wall tile, and then spread it along the wall, and then lay the floor tile. However, if the wall tiles are pressed on the floor tiles, they should not be pasted from the bottom wall tile, but from the penultimate wall brick to the top, and then the bottom row of the tiles will be pasted after the tiles are laid, and it will just be pressed on the floor tiles.

Kitchen and bathroom should be waterproof before decoration to ensure that the waterproof layer is intact, and the tiles can be paved only after passing the closed water test.

Based on the above analysis, we feel that wall pressing is more effective than ground pressing wall to reduce the dry ash layer of water entering the inside of the tile, and the effect is more prominent. Therefore, it is recommended that you should not be afraid of wasting man-hours, and insist on doing the wall and pressing the floor, which is more assured.