Generally, when you go to buy floor tiles, is it calculated according to blocks or square meters?

Generally, when you go to buy floor tiles, you will be calculated according to the block, a piece is about dozens of yuan, and a house of more than 100 square meters needs hundreds of yuan.

Generally speaking, it is calculated by block, and the floor tiles of different quality are not the same, and the first will be a little more expensive.

I think the general way of doing it is to calculate it in blocks. Because such a place is very reasonable, and such a calculation is acceptable to consumers.

Calculated according to the block, a brick is about a few cents, but if the quality is good, it will be slightly expensive.

Generally, when buying, it is calculated according to the square meter, mainly to see how much is a square meter, and finally choose according to the size of your room.

1. It's all possible. Under normal circumstances, the purchase of wall tiles is calculated by block, but if it is strongly requested by individuals, it can also be calculated by square meters.

2. If it is calculated by block, you need to calculate the area of the tile to be tiled, and then look at the size of the wall tile you like, you can know the number of blocks you need. If the area of the wall tile is 50 square meters, and the size of the wall tile is 800 400mm, then the area of a single tile is square meters, and the number of wall tiles required = 50, then the wall tile required is 157 Shengqing socks.

3. Before buying the difference between wall tile socks, you need to confirm what the approximate number of tiles is needed, and then buy more than 3% of the tiles on this basis, so as not to pave the tiles, there is not enough situation, and it will be very troublesome to make up the tiles again, and it may be difficult to make up the tiles of the same model and color, resulting in the overall effect is not so good-looking, bringing unnecessary trouble.

4. Before buying tiles, you also need to communicate clearly with the merchant, if the later tile paving is completed, if there is a surplus, it can be returned, so as to avoid causing greater losses. Moreover, the relevant agreement should be noted in the contract to avoid the merchant from regretting it later.

Generally, when you go to buy wall tiles to destroy the plum, you must ask what standards the paving can achieve, such as flatness, what is the standard of yin and yang angles, whether the wall tiles press the floor tiles, etc., because usually the labor cost is clear, but when the master works, what standard is not clear, and there will be arguments in the later stage, so you must ask clearly before making a decision.

<>First, measure the floor and wall dimensions of the paved space, and calculate the area (length) and width). If you need to order tiles, first choose the tiles in the store, then measure the size at home and calculate the number of various tiles based on the size you choose before buying. Dimensional Measurements:

Kitchen, bathroom (length, width, height, door and window width, height), and other places that do not need to be attached to wall tiles only need to measure the length and width (such as bedroom, living room) (Note: when measuring the height of the kitchen and bathroom, only the distance between the lowest position of the upper sewage pipe and the ground needs to be measured).

First, calculate the surface area of the wall tiles, add the surface area of the brick joints between the long and short sides of the wall tiles, then calculate the surface area of the entire wall, and then divide the surface area of the wall by the surface area of the wall tiles and brick joints to calculate the number of wall tiles required.

Calculate the number of pieces of footlines, edges, and waistlines based on their length: First, measure the total length of the footlines, edges, and waistlines to be pasted; Calculation formula: total number of pieces = total length value of single piece foot line, edge line, and waist line length value.

For example, if the length of the waistline to be pasted is 15m, select 600mm 100mm waistline. Total number of pieces = 15 pieces. If there is a decimal point after the calculation, it is generally rounded off.

Add a few pieces of building wear and tear and you can buy it.

Calculate the number of waistlines: (first ask the bricklayer to measure the total length of the waistline to be pasted) Formula: Total number of pieces = length of the waistline (m) Single waistline length (m).

For example, the length of the waistline is 10m, and the selected waistline specification is the total number of bricks grinding = 10 If the result has a decimal point, the calculation method of "rounding" is generally used, that is, a total of 13 bricks are used).

Floor tiles 800 800 is multiplied by equal square meters, so that one square is counted.

Because there is a 3% loss in the actual paving. In the actual construction, divide by the total area is the number of floor tiles required, considering that some areas are half bricks, so we should prepare a few more when we prepare.

When buying ceramic tiles, you can ask the merchant to show the relevant test report and certification certificate, the quality of this kind of tile is more reliable, such an authority will reject the poor quality of the tile. When choosing tiles, it is recommended to observe the flatness of the tiles, so that the quality of the tiles will not be too bad, the color of the high-quality tiles is uniform, and the pattern is complete, and the surrounding regularity is better.

floor tiles

Floor tiles are a kind of floor decoration material, also called floor tiles. It is made of clay firing. A variety of specifications.

The quality is firm, the bulk density is small, the pressure is wear-resistant, and the moisture-proof can be resisted. It is glazed and plays a decorative role. It is mostly used for the ground and floor of public buildings and civil buildings.

There are many varieties of floor tiles, and there is a lot of room to choose from, which can be divided into glazed tiles, full-body tiles, anti-skid tiles, polished tiles, etc.

As a large-scale floor material, floor tiles use their own colors and textures to create a living environment with different styles. The types of bricks on the market are very complete, you can choose the brand according to your budget and preferences, and choose the corresponding style of bricks according to the style design of the room.

The method of area calculation can be used to know the amount of floor tiles.

1) Prepare the measuring tools, tape measures, and paper and pens needed for recording.

2) Start measuring the length and width of the room where it needs to be renovated.

3) Draw a simple pattern on the paper and enter the measured dimensions.

4) Calculate the area according to the measured dimensions of the room. After measurement, the length is 3000mm and the width is 4000mm. The area is calculated as length multiplied by width and is equal to 12 square meters.

5) Measure the length and width of the tiles in the tile material market. After measurement, the length is 500mm, the width is 500mm, and the area of a single tile is calculated to be square meters.

6) According to the area of the room location of 12 square meters, divided by the square meter of the area of individual tiles, it can be concluded that 48 tiles are needed.

Tiles are generally counted as money per piece. Because tiles have different specifications, 300x300mm, 300x600mm, 400x400mm, 500x500mm, 600x600mm, 800x800mm, etc., you can let the merchant help you calculate the quantity when you buy.

Generally, 800x800mm per square is a piece; 600x600mm per square is a piece; 500x500mm is 4 pieces per square; 400x400mm per square is a piece; 300x300mm, 11 pieces per square; 300x600mm square piece. You can measure the area of your house first and then calculate it specifically.

First of all, ask the bricker to measure the total length that should be attached to the waist line, and the calculation method is:

Total number of pieces = total length of the waistline The length of the single piece of waistline.

For example, the length of the waist line is 10 meters, and the specification of the waist line selected is 80mm 3mm bricks.

Total number of pieces = 10m 33m = pieces).

After the decimal point, it is generally calculated by rounding up, so the result is 31 pieces, and you can buy 1-2 more pieces.

When estimating **, you can estimate by square meters, but when it comes to buying tiles, you must confirm the number of pieces with the merchant, so as not to let the merchant play the algorithm and unconsciously bluff your money.

The tiles on the market include full-body tiles, polished tiles, glazed tiles, antique tiles, microcrystalline tiles, etc. For different materials of ceramic tiles ** has differences, consumers in the choice of ceramic tiles, should understand what is the main use of ceramic tiles, what is the main purpose of their use. In this way, you can understand what style and performance you want to choose.

For bathrooms, it is best to choose tiles with good non-slip properties, and for living rooms and bedrooms, it is necessary to pay attention to the aesthetic and decorative effects. It is better to choose glazed body with microcrystalline stone tiles. It is full of beauty, and it is more classy.

A piece of floor is 10 centimeters wide and 80 centimeters long.

Then the area of a piece of floor is square meters.

One square meter requires 1 floor.

When the floor is sold, it is sold as a whole, and a minimum of 13 pieces should be bought.

Square meter is a metric unit of area. Defined as the area of a square with a side length of 1 meter. In life, square meters are often referred to simply as "square meters" or "squares". The Hong Kong and Taiwan areas are called "square meters".

The square meter (French: mètre carré, English: square metre, English: square meter) is the SI unit of area. It is a standard of measurement methods commonly used in life and work.

Definition: The area of a square with a side length of 1 meter is defined as 1 square meter, and the area of an arbitrarily shaped plane is also referred to as 1 square meter if it is equivalent to the area of a square with a side length of 1 meter.

The general floor tile area calculation is the total number of tiles is equal to the area of the tile divided by the length of the monolithic tile into the width of the monolithic tile, such as 50 square meters of tiles he is the total number of pieces = 50, when calculating the number of tiles, you should pay attention to the unity of the unit. Then when the decimal point is encountered, it is generally calculated by rounding, so it is a total of 606 pieces.

There are two ways to calculate the square of floor tiles

Calculated by the size of the floor tiles, the length is multiplied by the width, for example: 600 floor tiles, its square area is: 0·6 meters 0·6 meters = 0·36 square meters, that is, the square of each floor tile is 0·36 square meters, and the total number of floor tiles is multiplied by the square of each floor tile is the total square number.

Calculate the square of the floor tiles to be pasted: the length of the ground multiplied by the width, for example: the square of the ground to be pasted is: 12 meters 16 meters = 192 square meters, if it is the planned number of floor tiles, the loss should be added.

Accounting of ceramic tile decoration materials.

The auxiliary materials used in paving ceramic tiles mainly include: ordinary cement, white cement, medium sand, 107 glue, etc., paving wall tiles per square meter need 11 kg of ordinary cement, 33 kg of medium sand, 2 kg of lime, ground tiles per square meter need ordinary cement kilograms, medium sand 34 kilograms. White cement is used for polishing after inlaying, and it takes about kilograms per square meter.

It's multiplication, 300300=90000, it's square, 600600=360000, it's square, and 400400=160000, it's square.

For example, 300*300, his unit is, the unit of calculation is meters, first do unit conversion, that is, meters, is square meters, and so on, 600*600 is square meters.

The photosensitive ceramic tile processing data management system is specially engaged in this, and the calculation accuracy can reach the above, which is very accurate and trustworthy. You can refer to it, I hope it will be helpful to you.

The wall tiles of the bathroom can be multiplied by the length and width of each wall to get the area, and then the area of several walls can be added together.

The same is true for floor tiles, multiply the length and width by it, and when the time comes to go to the building materials market to buy something, tell people about the area, and they will calculate the number of uses.

Precautions: 1. The laying temperature of floor tiles should be higher than 10 or more. Before laying, the floor tiles must be placed face down on the construction site for more than 24 hours so that the temperature of the floor tiles is the same as the room temperature. The room temperature should be kept as constant as possible during the laying process.

2. In addition to squares, floor tiles can also be cut into triangles, rectangles and other shapes at will.

3. Before laying, first draw a cross-shaped baseline on the ground. The method is: measure the size of the ground, draw a longitudinal or transverse line on the ground, and then make a perpendicular line through the ** of this line.

Take the bathroom as an example: tile specifications: a brick flat), the bathroom is flat, a brick, but generally to buy a few more, afraid of loss, I summarized it this way, just bought tiles, I hope it will help you.

The calculation method can be: the total area of the tiles (floor tiles) applied The area of a tile (floor tile) The number of tiles (floor tiles).

For example, if the specification of your tile is 200 200, then the area of this tile is; The number of tiles required for 18 wall tiles is: 18; For 5 yuan each, then this 18 wall tiles need: 5 450 2250 yuan, and so on.

The total area of tiles (floor tiles) The area of a tile (floor tile) The number of tiles (floor tiles). For example, if the specification of your tile is 200 200, then the area of this tile is; The number of tiles required for wall tiles of 18 is:

18 blocks ; For 5 yuan each, then this 18 wall tiles need: 5 450 2250 yuan, and so on.