There are two ways to lay bathroom tiles, how to choose between wall pressing and ground pressing wa

There are two ways to lay tiles in the bathroom, namely the wall and the wall, and it is better to choose the wall as much as possible when decorating. There are many decorators who don't like to use this way when decorating others, because they feel that this kind of decoration will increase the difficulty, but decorating with walls and floors will indeed have great benefits. The reason why the decoration master is reluctant to install is because the difficulty of the construction is slightly greater, and the choice of such a decoration method means that when the tiles are pasted, the tiles below may be in a suspended state.

In this case, there is no focus point when pasting tiles, so it is easy to fall off if it is not handled well, so most of the decoration masters are reluctant to do this. And the floor tiles of the bathroom themselves have a certain slope, so it is more difficult to use such a decoration method, so most decoration masters will choose to use a simple way to paste tiles. <>

In addition, the cost of decoration is also different, because the simple decoration can be completed in one day, while the more difficult point takes two days. There is a significant increase in the cost of manpower, so it costs more money to decorate. But don't be dissuaded by the price, you can think about what kind of effect will appear after the decoration is completed.

With a more difficult decoration method, the waterproofness of the renovated toilet will appear better, while the waterproofness of the simple decoration method is not particularly good. <>

If you use a low-pressure wall to decorate, then in the case of bathing or water on the ground, the water will flow directly to the ground along the gap between the floor tiles and the wall tiles, and in this case, a layer of stagnant water may be formed, and this layer of water will penetrate into various areas. Therefore, for the sake of the experience of housing, everyone should still choose to decorate with walls and floors as much as possible when decorating.

You should choose a strong pressure laying method, because this laying method has better waterproof performance for the toilet, and it will be more difficult to decorate and the cost will be relatively high.

Personally, I think the wall should be pressed, because if it is redecorated in the future, it will be very easy to clean and will not damage the wall, which will save time and effort.

I think we should choose the solution of ground pressure wall, because this solution can ensure that the wall tiles do not fall off, and can make the wall tiles more stable.

After the wall tiles and floor tiles in the bathroom at home are laid, the reasons I shared with you above are that the wall tiles are laid in the wrong order, and the other is that the paving method is wrong. The paving sequence here refers to the wall tiles pressing the floor tiles or the floor tiles pressing the wall tiles. If you look carefully at the ** I sent, you will find that they are all wall tiles pressed by floor tiles.

Floor tile pressing wall tile means laying the wall tile first, and then pushing the floor tile directly onto the wall tile to complete the laying of the floor tile. In this way, the junction of the wall and floor tiles leaves a downward gap. If there is some settlement of the wall tiles slightly downward, then the above problem will occur, and all the debris will accumulate in this gap, which will eventually cause the gap to be dirty and impossible to clean at all.

This wrong approach is this: when he lays the wall tiles, he starts with the bottom bricks directly from the ground, and most of these people put the wall tiles on top of them all at once, so the wall tiles are removed last. One is the problem of cracks like the one mentioned above, and the other is the problem of cracking of the bottom brick.

I also shared it with you in the picture, so you can take a look. When laying bathroom wall tiles and floor tiles, the correct crimping sequence should be that the wall tiles are pressed on the floor tiles. How is this paving possible?

If you think about it, you can understand that in fact, when laying wall bricks, a brick will be left at the bottom to pave the amount, and if it is empty, it will not be tiled. Wait for the wall tiles to be laid before laying the floor tiles. At this time, place the floor tiles on the wall.

After the floor tiles are laid and the curing period is reached, we will make up the last wall tile, so that we can give the correct order of the bathroom wall tiles.

Because this construction method does not need to consider other problems at all, and then laying floor tiles after building the wall is the effect of floor tiles pressing wall tiles. But this situation will cause the crack between the wall and the floor to go upward, and water will flow down the wall to the crack, and the water will accumulate under the floor tiles. In the long run, there is a high probability that the waterproofing of the toilet will be adversely affected.

And from an aesthetic point of view, the general requirement is to leave uncommon cracks in the plane. For walls and floors, cracks are, of course, left on the ground. In this way, wall tiles and floor tiles can produce such an effect.

It is easy to paste the floor tiles before pasting the wall tiles, but it is easy to cause the floor tiles to wear and tear, which is counterproductive and causes unnecessary losses. The wall tiles are pasted from the height of the bricks above the ground and then upwards until they reach the height to be pasted. Then paste the floor tiles, all the floor tiles are pasted, and finally paste the bottom row of wall tiles, you can complete the statement that the wall presses the ground.

In fact, the correct decoration sequence should be, wall tiles and floor tiles. After all, there will be a lot of water vapor and splashing water when we take a bath, if it is the floor tiles pressing the wall tiles, after a long time, the water will flow smoothly, and the wall tiles will flow into the cracks, so that cleaning and waterproofing will cause a certain amount of pressure.

It is a wall tile pressed floor tile. Because the toilet is installed first, the ground is covered with mixed cement, and then the floor tiles are laid. The walls are paved, mixed with cement, and finally the wall tiles are pasted. Therefore, wall tiles and floor tiles are formed.

It should be wall tiles pressed floor tiles. After the bottom row of wall tiles is paved completely, the wall tiles are laid, which has the best waterproof performance and can effectively prevent water drips on the wall from falling into the gaps of the floor tiles.

The tiles in the living room are generally pasted with wall tiles first, and then finally pasted with floor tiles, so that the effect is more neat when pasted, and the general master can do it, if the wall tiles are attached to the floor tiles, then the master's manual is a high requirement.

The reason why the paving method of wall pressing the ground is to make the gap against the wall more beautiful, and many people think that this paving method can play a better waterproof role! So much so that we decorators are forced to follow this method for a long time to lay tiles, otherwise others will think that our technology is not in place. Leveling requires 2 3% of the inclined to the floor drain inclination, so when the wall is closed to the ground, the lowest piece of wall brick is reserved when paving first, and then embedded after the tiles are completed, which may require a little higher process and consume more man-hours.

Therefore, many teams have adopted the construction method of the ground wall surface.

<>First of all, put a brick at the bottom of the wall, the brick is suspended on the wall, and then paste it along the turn, this process is more troublesome, because there is no focus point at the beginning of the paste, so in the later construction process, it is easy to fall off and tilt, which will seriously cause the situation of falling off. The water flow of the bath can flow into the floor drain along the floor tiles, on the contrary, the practice of pressing the wall tiles on the floor tiles is easy to appear that the water flow will enter the cement mortar layer along the gaps, and it is easy to cause water seepage to the outer wall or downstairs at the ground or corner after a long time, and it will be more troublesome at that time.

As a practitioner, you can clearly tell you that the wall pressing the ground can not bring beauty, nor can it be waterproof, and may even have larger gaps, and it is not good-looking, which is the same as the horizontal and vertical water and electricity advocated by the decoration company, which is not of great significance, but simply makes you feel that it is professional and has the corresponding flexibility with the cement wall behind the wall tiles, to ensure that in the process of thermal expansion and cold contraction, the tiles are not squeezed. 2. If the wall tiles press the floor tiles, the water flowing on the wall will flow directly to the glazed surface of the floor tiles, and the water will not accumulate, but will flow into the floor drain.

If you choose to press the wall to the ground, the water on the wall will flow into the gap between the wall and the floor, and if it takes a long time, the water will seep into the sand and plaster layer under the tiles, which will cause the external wall of the bathroom to regain moisture.

Of course, the choice is to press the wall, because if the wall is pressed against the ground, the wall will be damaged when the leak is repaired.

It is better to choose "wall pressing", the way of "wall pressing" tiles not only has no gaps, but also will be more durable.

It should be the wall pressing the ground, because in this case, the height of the bathroom is very good, and it is also very reasonable, which will make people feel that the space of the bathroom is very large and empty.

When laying bathroom wall tiles, use "wall pressing.""It would be better to pave the construction process.

What are the differences between different paving methods for bathroom decoration tiles, wall pressing and ground pressing wall? The installation method is not the same; The wall is pressed to the ground is first pasted with tiles, the part by the road surface is empty first, and the floor tiles are pasted again. The floor pressure wall is made of tiles immediately after each wall tile is pasted, and one end of the floor tile can cover the wall tiles.

From the point of view of the difficulty coefficient of engineering construction, the wall pressing the ground is more complicated than the ground pressing wall.

The leakage problem is different; Since the toilet has frequent running water, water droplets from the walls will flow down the walls and onto the floor tiles. Because the wall tiles belong to the vertical situation, the road surface is not easy to leak. On the other hand, there will be a gap in the area where the wall and pavement work are handed over, and the water droplets on the wall will fall, which is very easy to penetrate into the cracks, resulting in water storage on the pavement.

Nowadays, however, grouts are used on the window edges, so leakage problems are rare.

Wall pressure has significant advantages over ground pressure wall, but the difficulty coefficient and cost of engineering construction are better first. Because the commercial land is pressed against the wall, only need to pave the wall tiles and then paste the floor tiles, this paving method is more convenient for the bricklayer master, without the whole so many processes, the wall tiles and floor tiles are paved all the way, which can save the master's time. But if you do this, the waterproof performance will be worse, because the bricklayer master has laid the floor tiles of the whole wall of the bathroom, and then the floor tiles can not be plugged in the gap of the wall tiles, only the exposed floor tiles are attached to the wall tiles.

And the wall of the bathroom is easy to have water, if you choose the wall to press the ground, the water will naturally flow into the floor tiles, and finally drain into the odor-proof floor drain. From the comprehensive analysis, it is easier to reasonably reduce the dry dust of water entering the internal structure of the floor tiles than the ground pressing wall, and the effect is more prominent. But be sure to talk to the decorator before paving.

ground pressed walls; When the walls and pavement are to be tiled, the wall tiles should be laid first. The main reason is that if the floor tiles are paved first, the whole process of waiting for the floor tiles to dry must consume a lot of time, resulting in an increase in the construction period - if the floor tiles are not dry, the tiles must be stepped on the floor tiles, resulting in the deformation of the floor tiles, the wall is hollow, and the wall is not leveled, and then the tiles are pasted. In that way, the bottom of the wall tiles will be blocked by the floor tiles, which is called the "ground pressure wall" people communicate well, otherwise they will basically choose the method of ground pressure wall paving.

The effect of decoration is different, the waterproof performance is different, the waterproof effect is different, the decoration style of the home is different, and the details are treated differently.

Different paving methods, the waterproof effect is not the same, and the aesthetics are also different, to choose according to the actual decoration style.

When the bathroom is renovated, it needs to be tiled. What is the difference between tiled and wall-pressed? PChouse will take you to find out.

It is recommended that the wall tiles and floor tiles are better for the bathroom tiles, and the main reasons are:

First, if the wall tiles are pressed on the floor tiles, they should not be pasted from the bottom of the wall tile, but from the penultimate wall brick to the top, and then the bottom row of the tiles will be pasted after the tiles are paved, and it will just be pressed on the floor tiles. Wall tiles and floor tiles will be more complicated. If it is a floor tile pressing wall tile, the construction is to start from the bottom of the wall tile, and then spread it along the wall, and then lay the floor tile.

Second, the decoration of the bathroom will generally do two waterproofing, the first time to prevent the sinking part of the water, the second time to prevent the ground water, and the wall of the wardrobe to do waterproofing, the rest of the walls to do 4o to 5o cm high waterproof is enough. The waterproofing of the bathroom is an independent waterproof layer, which has nothing to do with the wall and floor tiles.

Third, there will be a gap between the wall tiles and the floor tiles, if there is water flowing down the wall, it may flow down the gap to the waterproof layer, which will be very troublesome for a long time. The bathroom is a very damp place, it is best not to use floor tiles to press the wall tiles, which is more beautiful from the visual effect, and the bottom tile is not easy to produce hollows. However, the gap between the floor tiles and the wall tiles will be relatively large, and the waterproof effect is not too good.

Fourth, the floor tiles are not directly on the wall tiles, and the tiles will not be squeezed in the whole process of thermal expansion and contraction. And the wall tiles are not easy to see the edge of the gap, we all know that the corners are the most difficult to take care of, so it will not affect the overall appearance.

In bathroom decoration, the order of tiling is a headache. The experienced master told us that in general, it is more ideal to choose the way to press the wall to the ground.

The specific decoration of the house can be calculated here, just enter the area + city, calculate the decoration in 3 seconds, know the real ** in advance, and easily grasp the decoration company: [Click here, free decoration**].

First of all, the way the wall is pressed against the ground is better to prevent moisture from penetrating. The bathroom is the most humid place in the home, and if you choose to press the wall, then the gap between the wall and the ground may become a channel for moisture infiltration, and over time, it will cause damage to the tiles on the wall and floor. The way the wall presses the ground, because the floor tiles are under the wall tiles, the moisture is not easy to penetrate into the gaps, so as to better protect the tiles.

Secondly, the way the wall presses the ground is more aesthetically pleasing. If you choose a ground pressure wall, then at the junction of the wall and the ground, the edge of the floor tiles will be exposed, which will have a visual abruptness. In the way the wall presses the floor, the edge of the wall tile will cover the floor tile, making the whole bathroom look more neat and coordinated.

In the local market, the range of the way the wall is pressed is about 100-200 yuan per square meter, and the specific ** also needs to be determined according to the brand and quality of the tiles and the difficulty of construction.

Therefore, it is recommended that when decorating the bathroom, choose the way to lay tiles by pressing the wide wall of the bird. This not only prevents moisture penetration and protects the tiles, but also makes the bathroom look more aesthetically pleasing. Of course, the specific choice needs to be decided according to your actual situation and budget.

Finally, it is recommended to recommend our "Tuba Rabbit", Tuba Rabbit has 110,000 decoration companies and first-class businessmen in his hands, and the direct sales of building materials are affordable. Tuba Rabbit is selected for decoration, and Tuba Rabbit can accompany the signing of the contract for free, "decorate first and then make payment", reducing the worries of the owners. For more decoration information, welcome to visit:

Click to enter, professional customer service free consultation good company].