Do you pay attention to the cloth of the billiard cue, and what kind of cloth is used to wipe the bi

There is something particular about wiping the cloth of billiard cues.

First of all, the material of the cloth should be a wiping cloth that cannot be wrung out of water at all, so as to keep the club moist and avoid too dry and cause the club to deform or crack.

Secondly, if it is a new club, it may be painted on it, so you should use a fine sandpaper to sand the paint off, and then wipe it clean with a cloth.

Finally, the correct and regular use of the cue is the best maintenance of the billiard cue, if the climate is more humid, it should be wiped with a dry towel (preferably cotton) frequently. In addition, if conditions permit, you can buy a box of stick oil, and do maintenance every three months or so, the specific method is to apply the stick oil to the club, and then use a relatively fine "metallographic sandpaper" to do fine-tuning treatment to maintain the smooth and textured club.

It is important to note that when sanding with sandpaper, the force should be evenly applied to avoid grinding deviation or grinding out of the oval shape.

If the climate is humid, you should often wipe it with a dry towel (preferably cotton). Newly bought clubs generally have paint on them, and the paint should be sanded off with relatively fine sandpaper, as for other grinding methods, types, strengths, and scales are completely adjusted according to personal habits and preferences. Do not sand with a coarse sanding skin, as this can damage the club very seriously (you can use a finer sandpaper for initial sanding and then fine-tuning with a very fine "metallographic sandpaper").

In fact, the correct and regular use of the cue is the best maintenance of the billiard cue. Supplement, if it is a good club, conditions permit, you can buy box club oil. You can do maintenance once in three months, first wet and wring out with a cotton cloth and then wipe the club clean, let it dry, evenly apply the club oil, hang it vertically in the club cabinet with the rod hook, and air dry naturally, which has a maintenance effect on the club wood.

This is senior care.

It is not often used by the average hobbyist.

It is best to use polyester to smear talcum powder or prickly heat powder on the rod.

There is powder, and it is the same with any cloth.

You are willing to spend 100 yuan to buy cloth, which proves that your rod is still good! In fact, you can ask the seller when buying a rod! Of course, pure cotton material or flannel cloth will be better, because the surface of a good club is smooth enough, and you can't use too hard cloth to wipe it so as not to flower the club and affect its dribbling!

In addition, it is the choice of rods, and it is useless to choose a good cloth without a good club! It is important that the shaft is balanced when the handle is held one and a half palm-width away from the tail of the club, and that the head of the club must be round and not extend beyond the wooden part of the club!

Velvet, it's still better!

If you have the conditions, buy a cloth for them to swim and wipe the water (about 100-200 yuan).

Velvet or silk fabric.

It seems that the cloth resembling glasses cloth is possible.

Club maintenance: When not in use, store the club in the club box (preferably a relatively hard club box), do not place the club obliquely in the corner of the wall, do not put it in a hot place (next to the refrigerator or in direct sunlight, etc.), and do not put the club in the car or in a dark and humid place for a long time, high temperature and humidity will change the elasticity of the club.

If you notice that the club is sticky during use, use a damp cloth and soft leather to wipe the club from top to bottom. Do not use sandpaper to grind the club, as this will gradually damage the forelimbs of the club.

When using the club, wipe the club with raw linseed oil from time to time (usually once every 3-6 months). Start by wiping the club from top to bottom with a damp cloth and soft leather (if the club is dirty, you can add a little detergent, but don't use too much water to wipe the club, which will make the club swell); Then rub the oil on the club with a cloth or paper towel, if the club has not been oiled for a long time, you can also soak the club in oil, wipe it clean with a clean cloth after a few hours, wipe it clean until it is smooth and dry, and there is no residue, and finally dry the club with a damp cloth and soft leather.

If you have a buckle on your club, you should use steel wool to clean the surface of the hitch as dirt and grease left on the hitch will affect the club's contact with the ball on impact.

Oiling billiard cues is used to moisturize the wood, maintain the elasticity of the front branches of the cue, and prevent cracking of the ebony. Especially in the north, where the weather is very dry (air humidity is less than 60%), ebony is prone to cracking. Generally speaking, when you feel that the surface of the billiard cue is boring and astringent, and the ebony is gray and dark, you have to quickly oil the cue.

In fact, it is very simple to oil the club, prepare the dry cloth and stick oil, and you can start working.

Raw flaxseed oil is used for maintenance, and talcum powder is generally used during competitions.

It's best to use a tyney.

We use Tyney for club maintenance.

Sometimes the kind of glasses cloth that starts with wiping the eyes is used. Oiling is the best.

No waste of rod oil.

Generally, the oil is olive oil.

If it's too absorbent, you need to use it.

There is also oil replenishment too often.

3-4 times a month is fine.

More clubs absorb more.

It will be easy to deform.

Talc, which is used to increase friction. Reduce the slide rod.

1. First of all, when we use billiard cues in daily life, we should pay attention to the maintenance of billiard cues, and often wipe billiard cues with a clean dry cloth to prevent water from deteriorating billiard cues. Be careful not to touch the pool cue with water.

2. After using the billiard cue, the billiard cue should be placed in a good environment, and the billiard cue can be placed on a special billiard cue rack, while keeping the environment dry to avoid inadvertently hitting and breaking the billiard cue.

3. To oil billiard cues, especially after the paint on the surface of billiard cues disappears, as for the type of oiling, you can choose by yourself, there are many types on the Internet, all of which can be selected. When the billiard cue feels bad, and the opponent is worn and becomes unsmooth, you need to polish the billiard cue and choose a delicate frosted paper.

4. If the head of the billiard cue is damaged, you need to choose a special pencil sharpener to treat the billiard cue to prevent further deterioration, and also increase the feel and accuracy of the billiard cue.

5. Don't use billiard cues too hard, after all, billiard cues are wooden. Do not hit the ball with a club with an unglued leather tip. Once the copper ring, thread buckle and other parts are loose, they should be repaired as soon as possible to avoid damage to the wood and cannot be remedied.

Club Maintenance:

After the new rod is bought, it will generally be painted, which can be gently beaten off with water-rubbed fine sandpaper, planed, and then applied with olive oil. The last oil every three months or so, if any club no longer eats oil, it will not need to be oiled in the future.

If the weather is dry, you still need to use water, use a dry damp cloth to wipe the rod from the top to the top, and repeat it a few times. Pay attention to indoor temperature, humidity, do not expose to the sun, do not let it get wet, Taoyou had better buy a boom device to hang it up, so that it is not easy to bend, if there is a condition, you can buy a rod box to put it up, so that the protection of the rod is also good!

Also, try not to use your own club when you open the rod, just use his rod when playing in the billiard hall, because the force is very strong when the opening rod is easy to make your baby cue too stressed and bent!

It's best to spend a few bucks on a hanger for a club.

Then hang vertically.

Something better for the clubs.

There is exclusive rod oil! As for motorcycle lubricants, that's.

Specialized lubricants. Or you can use a plain clean cloth to get some motorcycle oil......

There is generally walnut oil and olive oil.

Maintenance and maintenance of billiard cues If the billiard cue is well maintained, it will be very handy, but how to better maintain your beloved cue: 1. About oiling. In fact, a good billiard cue has been fully oiled in the production process, ensuring that the surface will not dry out for a long time.

There will be no lacquer on the surface of such a new billiard cue, and you can use it directly, and if you feel that your hands are astringent, you can use sandpaper to gently polish it, but you don't need to oil it again. But if you buy an ordinary billiard cue with a dense wood grain, it is necessary to oil it, otherwise you will find that there are cracks in the wood grain after a while. 2. Do it yourself.

The leather head of the billiard cue is knocked off or becomes too thin due to the long time of use, which is the encounter of everyone who plays regularly, which is the need to replace the leather head of the billiard cue with a new one. First of all, according to the size of the billiard cue head, choose the size and quality of the new leather head, because although the leather head is small, it is the most important part; Then press the leather head on the sandpaper to draw an arc and fully polish it, so as to ensure that the adhesive surface of the leather head is absolutely flat; Then use a knife to scrape off the original glue on the sticking surface of the clubhead, and then carefully sandpaper it until all the wood is exposed, this step should be very careful to ensure that the bonding surface of the club is absolutely flat. Then the two adhesive surfaces are coated with a thin layer of quick-drying glue, less than more when gluing, use tweezers to clamp the leather head and put it on the club head for alignment, and press it hard after the glue is slightly dry, and the new leather head will be firm after 24 hours.

The key to sticky leather head is that the polishing must be flat and the glue must be less, so as to ensure that the newly sticky leather head is tightly seamed and easy to use. Rod oil knowledge: First, the use of rod oil:

The main purpose of the stick oil is to protect the surface of the club, moisturize the wood, and prevent the deformation and cracking of the billiard club. 2. How to use rod oil and steps: 1. First prepare a dry cotton cloth; 2. Clean billiard cues with a dry cloth; 3. Drop the rod oil to the part that needs to be oiled, and two to three drops of rod oil are enough; 4. Wipe the surface of the club with a dry cloth; 3. Precautions for rod oil:

1. How long does it take to oil the rod, first of all, to determine the material of your billiard cue, sandalwood cue, to observe whether the sandalwood part is boring, the color is dull, if so, you need to oil the rod, the sandalwood will be very shiny and bright after oiling. 2. When oiling the front section of the billiard cue, it is necessary to pay attention not to let the oil of the rod be on the leather head, otherwise the leather head can no longer be used. 3. If the front section of the billiard cue is made of white wax, you can use the remaining rod oil on the cotton cloth to maintain the front section after the sandalwood part is oiled, and there is no need to add rod oil; If the front section of the billiard cue is maple, we recommend that you try to put it on as little or no as possible.

4. After the billiard cue is oiled, it should be placed in a ventilated place, and after five to ten minutes, wipe off the rod oil on the ash part of the front branch with a dry cloth, and continue to dry the ebony part naturally, it is best to use a boom device.

If you are in a place where there is a pool goods store. You can go there and buy it. There are a lot of brands. If there is no specialty store. Then you can go to the cosmetics store and buy a bottle of olive oil. The effect of wiping the rod is also good.

Please note: When wiping the shaft, wipe the stem first, and then wipe the front branch with the remaining oil on the cloth after wiping. Don't put too much oil on the front branches. It will make the shaft yellow and unsightly.

Pour a small amount of olive oil over a cotton cloth specially designed to wipe the rod and wipe it gently (in addition, olive oil can not only protect the rod but also serve as a cleaner).

I don't know much about it, and it doesn't have to be olive oil, whatever.