What materials do you need to make an oboe whistle

The reed is divided into Wei tablets and the base and wires, a total of three parts, Wei tablets are best French, followed by Italian ones, of course, China will also have some good Wei tablets.

The thickness of Wei tablets is generally divided into two types, and the Wei tablets used by Europeans are generally around the same! The Wei tablets used by Americans will be very thin, and they are generally around the right.

The width of the Wei piece is also very important, generally speaking, Europeans will use it wider, especially Germans, will go to the left and right, and the French will be slightly narrower on the left and right! The United States is even narrower and the estimate is (of course, they will have other ways to remedy it) which will be explained in more detail later. We generally use it, because if it is too wide, it will have higher requirements for breath and control, it will be more difficult for us Oriental mouth shape and lip conditions, if it is too narrow, the treble will be very sharp, and the pitch is not easy to control!

So it's more suitable for Orientals!

The base is generally divided into Germany, France and Italy, and the German base is generally thicker (copper wall) and sometimes shorter, 46mm.

The French base is more slender, the pipe wall is also a little thinner at 47mm, and the Italian one is also 47mm, and for the base, the angle of the cone, the quality of the copper and the size of the opening at the top of the cone directly affect the sound of the reed, so it is very important to choose a good base!

How thick the walls of the oboe are, the size.

Abstract:The oboe is memorable for its fresh and soft timbre in the band, and to achieve the high quality of the timbre, it depends not only on the level of performance and the quality of the instrument, but also has a lot to do with the quality of the reed. Therefore, any player is eager to have a good reed in order to better perform at their level.

The importance of reed production is reflected in the following aspects: first, the different styles of performers are reflected in the different practices of reeds; Second, the production of reeds directly affects timbre, pitch and pronunciation; Third, the player's own conditions are different, and the type of demand for reeds is different; Fourth, the difference in musical instruments has different requirements for reeds. Generally speaking, the finished reed is expensive, if you learn to repair and make the reed, it is not only economical, but also satisfying.

It has been said that learning to make oboe reeds is already half the way to the oboe, which shows its importance. Keywords: oboe reed; Tools & Materials; Repair and Adjustment CLC Number:

Reed tongue. The tongue of the reed is made of dark materials (such as horns, hard plastics, etc.), because the light-colored materials cannot reflect the thickness of the reeds well when inserting the reeds, which affects the later debugging. The shape is wide in the middle and narrow at the ends, thinner on both sides and slightly thicker in the middle.

2.Ruler. It is used to measure the precise length of the sentry when tying and repairing the sentry.

3.Centerline molds. In order to place the planed reed with a knife and draw a centerline on it to facilitate folding in half, or use a straight cylinder with a diameter of 11 mm instead.

4.Water sandpaper, fine copper wire, cutting pads or flat-tipped nail clippers. Water sandpaper is used to polish reed edges and polishing; Thin copper wire is used to fix the size of the whistle; Cutting pads and flat nail clippers are used for reed incisions.

5.Whistle Knife. The whistle knife is a tool that plays a leading role in the later stage of reed production, which can indirectly determine the quality of the reed.

Generally, you need two, one for rough work, not too good knives; A fine trim should be used with high hardness and a sharp edge so that the reeds can be precisely adjusted. 6.Sentinel Mount.

The length of the sentry mount is generally 46-47 mm, and the 47 mm one is more versatile. The caliber of the sentry will affect the timbre and pitch of the reed. The sound of the whistle with a small caliber is sweet, but it is easy to cause the problem of low treble area; The larger sentry mounts have a firm articulation and a more controllable treble, but the articulation is slightly sluggish.

7.Tie the sentry line. It is used to fix the reed sheet on the sentry seat, and No. 2 nylon wire is commonly used.

Second, the preliminary production of the reed 1Fold. The length of the semi-finished reed sheet is generally 75 mm, and it is best not to change the arc and length of the reed sheet at will.

When we get the finished reed, we need to fold the reed in half, which is not as simple as folding it in half from the middle, if the middle line is deep, the reed seal (the seal before the opening) after folding will be large, and it is easy to make mistakes; If the stroke is too shallow, the reed is easy to crack when folded in half. The correct way is to place the reed on the center line mold, and use a knife to draw the center line on the back of the middle of the reed, and the depth of the knife edge is about one-third to one-half of the thickness of the reed. It takes many times of practice to master the number of knives and the strength.

Oboe and French horn are generally small because whether it is the reed of the oboe or the horn nozzle of the French horn, but as long as the lips are not thick against the sky, talent is very important to be honest, like the students I have met have a few months of progress can catch up with most people, but more is hard practice, you should know that you have learned the flute before, long tone is the basic skill.

Both the oboe and the French horn are much, much, much harder than the flute... Why do you want to change the flute? **The most taboo is three and four. Let's continue to learn the flute.

There is no hard requirement for this, as long as you have the heart to learn, everything is OK.

1.The orchestra is tuned before playing for the sake of harmony in playing.

2.Symphony orchestras generally use oboe to tune other instruments. There are several reasons for this:

The oboe has a penetrating sound from the orchestra.

The team stands out so that it is easy for all the players to hear. Its pitch is also more stable than strings, so it's a more reliable tuner.

To change the pitch of an oboe, it is usually necessary to adjust the width or length of the whistle reed, and it is almost impossible to make such a trimming a short time before the performance, i.e. it is difficult to adjust the pitch of the oboe. As a result, other instruments must match their pitch, which is why the oboe is used as a standard for tuning.

Why does the band smoke before playing? **What method do you generally use to tune your instrument to be lower, you can add a reward for the instrument, the instrument should be tuned, otherwise the sound quality of the instrument will not sound good in the future, which will affect the audience's **, as well as the auditory experience, if you hang a cigarette, what kind of instrument is it in general? What musical instrument?

Try playing a piece of it.

This is very simple, you have to use logical thinking, you think that a reed can't be vibrate, how can you vibrate such a long tube?

Marigors, Liguta, Laurie, Buffy, Springer, these are good, the brand is not too important, it suits you.

Don't be so complicated, let's put it simply, wind music includes woodwinds and brass, woodwinds include clarinets, oboees, bassoons, flutes, piccolos and so on. Brass tubes are small, trombone, French horn, tuba, and so on.