The satellite dish is upgraded like this, and it seems that some password is needed

There are generally two ways to upgrade a satellite antenna:

Click on the settings to enter the password to upgrade, the password is generally 111111 or 666666 see the instructions in detail.

You can upgrade the wireless password directly by logging in to upgrade the computer.

A satellite antenna, often referred to as a cauldron, is a metal parabola that is responsible for reflecting satellite signals into the feed and high-frequency head located at the focal point. The role of a satellite dish is to collect the weak signals from the satellite and remove noise as much as possible. Most antennas are usually parabolic, but there are also some multifocal antennas that are a combination of spherical and parabolic surfaces.

The satellite signal is reflected by the parabolic antenna and concentrated to its focal point.

Zhongxing-9 launched the first phase of the bidding for the aerial upgrade of the "Village-to-Village" set-top box. Starting from 15 o'clock, the first batch of genuine set-top box users after turning on, prompts for automatic upgrade of set-top boxes appear on the TV screen one after another. The genuine set-top box software upgrade is carried out through the force of automatic upgrade of the air ** and the item box in the boot state, and the upgrade process lasts about 3 to 10 minutes.

After the upgrade is completed, the set-top box indicates that the last upgrade date is December 27, 2009. At the same time as the software was upgraded, Zhongxing 9 added 20 sets of radio programs at the same time. For tens of millions of underground "black boxes", due to the lack of genuine serial numbers, it is impossible to complete the automatic upgrade work.

Although at present, pirate machines can still watch 46 TV programs normally. However, after Zhongxing 9 began to adjust the technical parameters of the front-end broadcast on January 4, the "black box" will only be able to see 12 sets of programs specially provided for farmers and herdsmen, and the number of channels will gradually decrease according to the situation until the screen is completely black. With the launch of the software upgrade work of Zhongxing-9, the Zhongxing-9 satellite has also launched 6 new ** devices a little earlier for the program ** and testing of the encryption channel of the set-top box in the second phase of the bidding.

A total of 8.65 million sets of set-top boxes were tendered for the second phase of Zhongxing No. 9 "Village to Village", and it is expected that by the end of next year, it will complete the task of connecting more than 10,000 radio and television villages with more than 20 electrified "blind villages" across the country. It is understood that the purpose of the upgrade of Zhongxing No. 9 is to crack down on all "black boxes" on the premise of ensuring that 3.66 million genuine set-top box users can watch the original TV program normally, so that they cannot watch the program normally. Today, Zhongxing-9 will continue to carry out upgrade work, and the entire upgrade process will last about 20 days.

Every time you upgrade, there will be a batch of "black boxes" that can't watch the program normally. It is understood that since October 11, Zhongxing 9 has partially adjusted the frequency band of the original phase in order to prepare for the launch of the second phase of the encrypted channel. At present, the Zhongxing-9 live broadcast satellite has enabled 12 ** devices.

Zhongxing-9 has a total of 22 signalsZhongxing 9 is automatically upgraded in the sky.

The cauldron is not encrypted! Check the interface and line of your antenna first, and adjust the pot if it doesn't work. If it is interference, it is illegal to install jammers, you can complain to the local radio administration to report, satellite signal jammers transmit powerful power, not only to satellite signals, mobile phone radios, etc., but also to human health is very harmful, especially children and pregnant women.

You can eliminate interference by yourself before removing the jammer: satellite TV signal jammer precautions 1. Find the shielding position Satellite signals come down from the sky, wired interference signals are emitted from the ground, and the signal emission angles between them are different. It can find the position where the interference wave cannot interfere or the interference is small, that is, the interference dead angle.

Interference waves and satellite waves are both straight line waves, which will be reflected when encountering obstacles on the way, but the difference between these two types of radio waves is that the field of interference waves is tens of millions of times stronger than satellite waves, resulting in reflections in all directions after encountering obstacles and buildings, while satellite waves are easily absorbed by the surface if they are not reflected by antennas. The easiest way to find a shield location is to lower the antenna height, as jammers have a certain height when transmitting microwave interference signals. Secondly, the surrounding natural objects can be used to avoid the surrounding strong microwave interference signals, such as placing on the open ground is better than placing it on the top of the floor; The antenna can also be moved to the other side of the building, which can be used to block interference waves from that direction.

2. Install an anti-jamming device to determine the best direction of the interference wave, and set up a metal mesh on one or more sides of the antenna to block the interference wave and reflect the interference wave. The height of the metal mesh should exceed the high-frequency head on the satellite antenna, and it should not block the travel path of the satellite signal. Since the wavelength of the C-band signal is in between, if the metal mesh is used to shield the interference wave, in order to prevent the interference wave from leaking into the metal mesh, the mesh aperture should be less than the shortest wavelength 1 4.

i.e. small. If the interference is not too serious, you can also add a metal strip with a width of 10 20cm on the outer edge of the antenna, perpendicular to the plane of the pot mouth. Of course, the wider the width of the metal band, the stronger the anti-interference performance, but the antenna of one pot and multiple satellites should not use this method, it will block the satellite signal reception that is not perpendicular to the surface of the pot.

You need to go online and buy a new shared server account address and pour it into your receiver. For more information, see DM500 Update. If you're this receiver too.

Now the cauldron is also encrypted? I fought with the small ones.

If it is encrypted, there is no other way but to use a decryption card.

Since the Zhongxing99 satellite TV receiver was upgraded, some copycats could not be automatically upgraded when they were turned on. After turning on the machine, the automatic search to 39% will cause a crash, and the remote control fails at this time and cannot be exited. Note! It's not a crash.

The latest decryption method of the cottage pot: it has been successfully upgraded, everyone try to connect the power first, turn on the machine, enter the menu, enter the system settings, prompt you to enter the password *** The password is 9999, do not enter 0000, enter the new main menu, please select a factory reset item, press the confirmation button, wait for a second to come out of the new interface, and then press F4, F4, F4, F4, F4, F4, F4, display the star upgrade (not a serial port upgrade machine can press out of the serial port upgrade method is F4 plus F3), At this time, press the exit button again,The moment the TV protrudes along the black screen,At this time, unplug the antenna,Quickly connect it again (the process should be completed in the moment of the black screen),Then quickly press the confirmation button,The machine screen displays the word up (at this time, the machine has entered the upgrade state),It takes a certain amount of time to install the computer system! After the upgrade is successfully completed, the word up disappears on the machine, the remote control is turned off and restarted, and the automatic search is entered, and the program update is displayed (the machine will ask you if you want to update 001, press the confirmation button, enter 002 and ask you if you want to update the program and then press the confirmation key or guess (until 7), the collection is completed, 46 sets are displayed, and 20 radio programs are added.

Small pot cracking method 2: factory reset.

The upgrade program does go to the receiver, but if you start the update program, only the serial number changes from to , and the upgrade bar does not change at all. Then it automatically enters the automatic search, and after 39%, the progress bar does not move. But the frequency is increasing all the time.

You interrupt and exit. Not a single show was left behind. You don't interrupt the rollout, and the frequency is increasing all the time.

It's like a dead machine.

The solution is to go to the settings, go back to the factory state, and the password is 9999 or 0000Then enter the manual search, there is no program at the first frequency point, and there is a program when you enter the frequency point 2 search, and there are programs at the third and fourth frequency points, and there are 54 programs at the three frequency points of 2, 3, and 4. It's the same as before.

Small pot cracking method three: copycat machine upgrade.

The middle nine machine is upgraded to the machine, and the mother machine is one. In fact, it is a machine that can be seen at the moment. One serial port line.

The handset is only a few that cannot be upgraded at the moment or the rubber continues to display the upgrade status. Step 1: Connect the serial cable behind the machine. 2。

When the mother machine is powered on--- press the F4 button three times. 3。Are you sure.

At this time, the panel of the parent machine is displayed, and the handset is powered on, and the panel is displayed as chaos. 5. At the start of the upgrade, the panel of the parent computer shows that 001 to 099 is changing to E-P and finally to 001. Upgrade successful!

Genuine Satellite Dish Upgrade Method.

Method 1: Machine-to-machine configuration is upgraded.

1. Go to the place where you buy the antenna, and the marketer has a mother machine. He will use the upgrade cable to connect the mother machine to your antenna, and then use the mother machine to upgrade your set-top box.

2. If a neighbor or friend has an antenna that has been upgraded, you can also use the same method to upgrade. Upgrade the handset via wire, provided that the version is the same.

Method 2: Upgrade your computer.

You need to prepare to upgrade the small board and data cable. Connect to your computer via the upgrade board cable. Of course, there are differences with the different tools you buy for satellite dishes. The tools are available online.

Method. 3. Use a reader to copy the memory in the machine.

Copycat satellite dishes are cracked and upgraded.

Unplug the signal cable,Automatic search will be completed,Due to no signal search,After the search, it shows that 0 sets of TVs were found,But at this time, the remote control can be used but the receiver is still in a state of no program。 Then connect the signal line, enter the Laidan, and manually search the four groups of ** devices. Be sure to do it manually, the automatic search will freeze again.

Method 2: Factory reset.

The upgrade program does enter the receiver, but if the upgrade program is started, only the serial number changes from banquet to , and the upgrade bar does not change at all. Then it automatically enters the automatic search, and after 39%, the progress bar does not move. But the frequency is increasing all the time.

Interrupt and exit, and the outside ** is like a dead machine. The solution is to go to the settings and return to the factory state, the password is 9999 or 0000. Then enter the manual search, as soon as there is no program, enter the frequency point 2 search and there is a program, and the frequency point three or four also has a program, 2, 3, 4 These three frequency points have 54 programs.

It's the same as before.

Adjust the menu first - system setting - password 9999 --- automatic locking. If it is still 12 sets of programs, it will be taken to the seller to upgrade.

You can find the mother machine to upgrade.

Different models, different cracks, some can be manually modified, some can only be software flashed firmware.

This is almost difficult, it is recommended to buy a genuine machine directly, it is not too expensive!

**Buy** upgrade Upgrade has a password.