The process and steps of making a puppy, the handmade process of doing a puppy

Kindergarten Handmade Tutorial Puppy Origami** Tutorial.

This is again a very cute handmade origami.

Puppy tutorial, the origami puppy tutorial has appeared several times in the origami encyclopedia**, and it is still very popular with kindergarten children. The style of this puppy is slightly different, mainly because this puppy is more cute, and it will look more beautiful when paired with other origami styles.

Kindergarten Handmade Tutorial Puppy Origami** Tutorial.

Step 2: Then put all four corners of the paper.

Folds toward the middle point;

Step 3: Place the triangle on the left side of the origami paper outward;

Step 4: Fold the top half of the DIY origami paper in half at this time;

Step 6: After that, then fold the corner of the upper surface inward outward;

Step 7: Then fold the bottom left and top right corners of the DIY origami paper inwards respectively;

Step 8: After that, fold the white triangle in the middle of the DIY origami paper to the right;

Step 9: Fold the bottom corners of the upper and lower layers on the right side of the DIY origami paper backwards;

Step 10: Rotate the paper for DIY origami;

Step 11: Naturally, use a paintbrush to draw the face of the origami puppy, and well, a cute toddler origami puppy is finished.

Take out your favorite color and cut it into a triangle, take the two corners and fold them in half to make puppy ears.

In flipping over, fold a small triangle, turn it over, draw two circles with a pencil, and draw eyebrows on both circles.

Draw the eyeballs inside the circle and the nose on the underside of the eyes.

Draw a mouth under the nose and a cute decorative puppy will be made into a pull, which we can stick to the wall to decorate our own cabin.

Your name is Wangwang.

The handmade process of doing a puppy

Hand puppet puppy. Preparation materials: cardboard, scissors, solid glue, pen production method: 1Fold the yellow cardboard in thirds. Then fold the cardboard into an "M" shape. Cut out the puppy's ears and eye circles on brown cardboard.

cut out the puppy's tongue on red cardboard; cut out the puppy's nose on black cardboard; Cut out two circles on white cardboard and draw the eyes with a pen. cut out the puppy's nose on black cardboard; Cut out two circles on white cardboard and draw the eyes with a pen.

Paste the cut parts separately on the folded yellow cardboard. Finally, decorate it with a pen, and the hand puppet puppy is ready! 2.Towel puppy.

Preparation materials: old towels, non-woven fabrics, leather bands, scissors, plastic eyes, tweezers, glue How to make it: 1

Roll up the towel from both sides, and when rolled, secure it with tweezers. 2.Fold the rolled towel in thirds and secure it with a rubber band.

3.Cut out the puppy's ears on non-woven cloth and stick them on a rolled towel.

Please click Enter a description.

Stick your nose, eyes, and mouth on the towel as well. 5.Glue the tail behind the towel. 6.Finally, decorate it with strips of cloth, and the cute towel puppy will be ready, and the old towel at home will be of great use.

Puppet puppy. Preparation materials: paper tubes, paints, scissors, hemp rope, wooden sticks, glue, cardboard, straws.

How to make:1Paint the paper tube and cut it into the shape below. 2.At the bottom of the paper tube, make four holes, symmetrical in pairs. Thread two hemp ropes through the hole and string a straw as the puppy's legs.

Then make two symmetrical holes above the paper tube, string a hemp rope, tie one end to a wooden stick, and the other end through the small paper tube, and tie it to the other wooden stick.

Stick the ears on the puppy's head. 5.Attach the round cardboard to the puppy's eyes and body. 6.And with that, the marionette puppy is done!

The steps to make a puppy by hand are as follows:Method 1: Prepare the materials.

Cardboard, scissors, solid glue, pen production method:

1.Fold the yellow cardboard in thirds. Then fold the cardboard into an "M" shape.

2. Cut out the puppy's ears and eye circles on brown cardboard; cut out the puppy's tongue on red cardboard;

3.cut out the puppy's nose on black cardboard;

4.Cut out two circles on white cardboard and draw the eyes with a pen. cut out the puppy's nose on black cardboard;

5.Cut out two circles on white cardboard and draw the eyes with a pen.

6.Paste the cut parts separately on the folded yellow cardboard.

7.Finally, decorate it with a pen, and the hand puppet puppy is ready!

Method 2: Prepare the materials.

How to make old towels, non-woven fabrics, rubber bands, scissors, plastic eyes, tweezers, glue:

1.Roll up the towel from both sides, and when rolled, secure it with tweezers.

2.Fold the rolled towel in thirds and secure it with a rubber band.

3.Cut out the puppy's ears on non-woven cloth and stick them on a rolled towel.

4.Stick your nose, eyes, and mouth on the towel as well.

5.Glue the tail behind the towel.

6.Finally, decorate it with strips of cloth and the cute towel puppy is ready.

Method 3: Prepare materials: paper tubes, paints, scissors, hemp rope, wooden sticks, glue, cardboard, straws.

1.Cut the paper plate into the shape of a puppy's face.

2.Then cut out the shape of the puppy's ears, ruler's nose and eyes on a paper plate and color them with paint.

3.Paste the various parts of the puppy together, and draw the mouth after the Ling Heng type, and it's OK. Stop.

Here's how to make a puppy by hand:

Learn how to make animal balloons, which can come in handy at festivals or parties. People love to make special, colorful animal balloons that look lifelike. Familiarize yourself with the winding techniques of each animal balloon, make the basic frame of each animal balloon, and then use your knowledge to make a balloon dog, monkey and swan.

The steps of making a balloon puppy by hand are part of a series of tutorials on making animal balloons, and the tutorial also includes learning basic twisting, making a balloon puppy, making a balloon monkey, making a balloon swan, and following this handmade balloon puppy step by hand from Juqiao.com, to see how to make animal balloons.

Handmade balloon puppy steps.

1. Inflate the balloon, leaving an 8 cm tail. Continue blowing until the air expands and the tail end remains about 8 cm, then stop blowing and tie the balloon in a knot.

2. Make three basic twists. Starting with the knotted part of the balloon, make three basic twists, so that the balloon has a total of four parts. The first part, including the balloon knot, forms the dog's nose.

It is longer than the other two segments, which can form a dog's ears. The last segment is the longest and will be used to make the dog's body.

Hold these segments with one hand to prevent them from letting go, as they are not yet locked.

Try to make the nose and ear parts with different lengths. You can also make an extra-long snout so you can call your animal an anteater.

3. Twist the ear parts together. Use your free hand to grab the ear parts of the second and third segments and twist them together three times. This locks them down. Can you see the dog's head?

4. Make three other basic twists. Make the first twist a few inches below the head to form the neck. Make two twists below the neck so that the two parts are equal in length, which will form the legs. Use the same hand to hold the freshly folded parts to prevent them from coming loose.

Would you rather have a giraffe than a dog? Then make the neck super long, and the rest of the body is exactly the same.

You can make the legs longer or shorter, but they should remain the same length.

5. Twist the legs together. Twist the middle part of the legs, grasp the legs with your free hand, and wrap them together using your neck as a base. Now the legs and neck are locked in place.

6. Make the other three basic twists. This time, the rest of the section is divided into four sections of equal length. The first segment is the dog's body, the two parts of the second segment are the dog's retreat, and the last part is the tail. Hold them in one hand to prevent them from coming loose.

7. Twist the hind legs together. Twist the part between the two hind legs, grab both legs and twist them three times on the basis of the body part, and look at the balloon shape you complete: it has a knotted nose, short ears, front and hind legs, and a straight tail.

Your job is done.

Materials that may be used.

Unblown 260 balloons.

Balloon pump or better lung capacity.

Carton puppy handmade tutorial:

Start by taking out a useless cardboard box and draw an appropriate circle on the cardboard box with a black pen. Then use scissors to cut out the marks drawn on the cardboard box. Place the cut circle on a piece of colored paper.

In the same way, two more round pieces of paper were cut out of the cardboard box that had not been used by the brother. Place a cut round piece of paper on the right side of the colored paper, then place another round piece of paper on the left side of the colored paper, and then place the third round piece of paper on the left round piece of paper to clear the dust.

Use a black pen to draw a figure of each of the four boots on a round cardboard box and cut it out with scissors. Take out two of the four boot cards and place them under the round card on the left, and take out two more boot graphic cards and place them under the round card on the right.

Take out a colored paper box or a piece of colored paper, and draw a cloud-shaped figure on the colored paper box or colored paper. Use scissors to cut out the cloud-shaped figure and place it on top of the round card on top.

Then take out a colored cardboard box or a piece of colored paper, and use a black pen to draw two oval shapes on the colored paper box or colored paper. Use scissors to cut out the two oval-shaped shapes, and then place the two elliptical cards on the left and right sides of the cloud card.

Then take out a colored cardboard box or a piece of colored paper, and use a black pen to draw two smaller circular figures, a heart-shaped pattern, and a tail-shaped pattern on the colored cardboard box or colored paper.

Use scissors to cut out the shapes, and then place the shapes of the two smaller cards under the shape of the cloud, and the heart cards under the two smaller round cards. Place the tail-shaped card in the upper right corner of the large round card on the right.

Materials and tools needed to make a three-dimensional puppy on cardboard: square colored paper, scissors, glue, tape, markers or colored pencils.

Step 1: Take a square piece of handmade paper, fold it in half along the horizontal midline, and then fold it left and right to make it a quarter size.

Step 2: Fold the left and right in half to open.

Step 3: Draw a tail shape on the left side of the midline, and cut the line with scissors.

Step 4: Open the paper completely after cutting.

Step 5: Straighten the left part of the midline, fold all the other parts down to the right except for the tail, and fix the overlapping parts with gelatinous tape.

Step 6: Fold the upper and lower parts of the horizontal midline in half to make the tail protrude. Then draw a puppy outline line.

Step 7: Cut out the part outside the contour line.

Step 8: Fold the root line of the tail to one side to make a Jin Wang fold line, and then fold along this fold line to the middle of the two layers of paper to make the tail.

Step 9: Attach the eyes and ears, and draw the mouth and nose. These can be drawn with a pen, and if the little friend likes to draw, then everyone's puppy can be drawn differently, which is very interesting.