How do airpods look at the power of a headphone

Connect your phone and the battery level will be displayed on your phone.

There will be two in the power display, you can see which one it is.

Method 1: Check the charging status on your iOS device.

1. Unlock the phone, and slide the home page to the right to the negative screen, as shown in the figure below.

2. Click on the bottom of the negative screen interface. This is shown in the figure below.

3. Find the battery component in the interface and click the plus sign in front. This is shown in the figure below.

4. The battery components are added successfully, click Finish, as shown in the figure below.

5. Connect your AirPods Pro to your iPhone as shown in the figure below.

6. Return to the negative screen, and you can see the battery level of your AirPods! Put the earphones in the box to see the power of the box! This is shown in the figure below.

Method 2: Check the charging status on your Mac.

1. Open the lid or take out your AirPods from the charging case.

2. Tap the Bluetooth button in the menu bar.

3. Hover over the AirPods and charging case in the menu.

If your AirPods are in the charging case, the light shows the charging status of your AirPods. Otherwise, the indicator shows the charging status of the charging case. Green means it's fully charged, while amber means there's not enough power left to charge your AirPods once.

If the light flashes white, your AirPods can be set up from a device. If the light flashes amber, you may need to set up your AirPods again.

How to check the battery level of your AirPods:

1. Take iPhone XS Max as an example, after unlocking the phone, the home page slides to the right to the negative screen, as shown in the figure below.

2. Click on the bottom of the negative screen interface, as shown in the figure below.

3. Find the battery component in the interface and click the plus sign in front of it, as shown in the figure below.

4. The battery components are added successfully, click Finish, as shown in the figure below.

5. Return to the negative screen, and you can see the AirPods battery level, as shown in the figure below.

Here's how:

2. Click the small "" sign in front of the battery to add the battery to the widget, and then click "Done" in the upper right corner.

3. On this interface, you can see the power of your AirPods. The way to check the battery level of a single earbud is the same as the first method, take out one earbud from the charging case and display it.

AirPods battery life.

1. A single charge allows you to listen to AirPods for up to 5 hours or talk for 2 hours.

2. With multiple charges with the charging case, you can listen for more than 24 hours or talk for up to 11 hours.

3. If you put your AirPods in the charging case and charge them for 15 minutes, you can listen for up to 3 hours or talk for more than 1 hour.

4. When the battery level of AirPods is low, you will hear a prompt tone from one or two AirPods, when the battery level is low, you will hear a prompt tone, and when the AirPods are about to shut down, you will hear a prompt tone.

The specific operating liquids are absolutely as follows:Tool: Hyo Split iPhone 8

Operating system: iOS

Device: AirPods

1. After unlocking the phone first, the home page slides to the right to the negative screen, as shown in the figure below

4. The battery components are added successfully, click Finish, as shown in the figure below.

5. Return to the negative screen, and you can see the power of a single earphone of AirPods, as shown in the figure below

Here's how to check the battery level of your AirPods:

1. Put one of the earbuds into the charging case.

2. Bring the charging case and the other earbud close to the phone to check the battery level of the earbuds.

3. When the two earphones have different power levels, you can also check their respective power levels directly on the mobile phone.

The headphones are a pair of conversion units, which accept the electrical signals sent by the **** device or receiver, and use the speakers close to the ears to convert them into audible sound waves. The headset is generally detachable from the **** device and is connected by a plug. The advantage is that you can listen to the sound alone without affecting the side burial and fighting people; It can also isolate the sound of the surrounding environment, which is very helpful for people who use it in noisy environments such as recording studios, bars, travel, sports, etc.

Headphones were originally used for ** and radio, but with the popularity of portable electronic devices, headphones are mostly used in mobile phones, walkmans, radios, portable video games and digital audio broadcast limb players.

From the perspective of the development of the entire audio industry, wireless headphones are still a new thing, the development time is not long, and it is still in the rising period, user demand is constantly improving, and users' expectations for wireless headphones are also increasing, which is a new test for the industry.

Here's how:Tool: iPhone 8

Operating system: iOS

Device: AirPods

1. First unlock the mobile phone, and then slide the home page to the right to the negative screen, as shown in the figure below

4. The battery components are added successfully, click Finish, as shown in the figure below.

5. Return to the negative screen, and you can see the power of a single earphone of AirPods, as shown in the figure below

Precautions in daily use:

1. Please use the official standard charger to charge the battery to ensure that the charging voltage is stable and meets the standard.

2. Theoretically, keeping the battery power in the middle range of power for a long time (about 50%, such as 30%-70%) is more conducive to prolonging the battery life.

3. If the battery temperature is too high or too low, it will affect the battery life of the mobile phone.