Which company has an installation manual for LED panel lights, and can you provide a copy?

LED panel light is a high-end indoor lighting fixture, its outer frame is made of aluminum alloy anodized, the light source is LED, the whole lamp design is beautiful and concise, atmospheric and luxurious, not only has a good lighting effect, but also can bring people a feeling of beauty. Xiamen Guangpu Electronics Co., Ltd. is a professional group manufacturer specializing in the development, production and sales of LED semiconductors and lighting products. Here are the common recessed LED panel light installation instructions::

Parts of LED Panel Light:

1. Panel lamp body 2, power supply 3, screws, nuts.

Instructions for use:

1. Put the heads of the four screws into the holes of the back cover of the lamp body;

2. Slide the four screws to the small hole and make sure that the cross disc is stuck in the cover;

3. Align the hole position of the power supply structure with the four screws, and if there is any unevenness, it can be moved slightly;

4. Tighten the nut and screw, and fix the power supply and the panel light box;

5. Connect the bolt structure of the power supply output end with the bolt clamp position inside the box, and insert it with it, and cannot be forcibly inserted in reverse.

6. Embed the lamp body into the ceiling, connect the plug to the power supply, turn on the switch, and turn on the panel light.

Note: The panel light is designed to be the same size as the ceiling, and when it is embedded, it cannot be placed obliquely to prevent it from slipping. Due to the different construction methods, please focus on checking whether the ceiling dragon skeleton can bear its weight and whether the embedded area is matched, otherwise the panel lights will be reinforced and suspended.

LED panel light installation form:

1. It can be inlaid in the ceiling, when inlaid on the white ceiling, it is unified with the whole ceiling, which is very beautiful, neat and coordinated;

2. It can be hung on the top of the wall or on the surface of the mounting body; Consistent with the color of the wall.

Maintenance and cleaning method of led panel light:

1. Be sure to cut off the power supply and unplug before cleaning.

2. When cleaning the surface, you can wipe it with a damp rag. Do not allow water to penetrate into the product; The lid should not be disassembled to clean the internals.

LED panel light is an energy-saving, environmentally friendly and safe lighting fixture, which can completely replace the existing traditional panel lighting fixtures. There are three installation methods for LED panel lights: bracket fixed, wire hanging and embedded, let's take a closer look at them below.

The first installation method: bracket fixed.

Make a few screw holes in the ceiling first, and then install the LED panel light slide-in ceiling frame on the ceiling and fix it on three sides. Then slide the panel light into the fixed slide-in mounting frame, and then screw the fourth edge to fix the frame. Convenient, simple and time-saving.

The second installation method: steel wire hanging type.

First, fix the hanging wire mounting parts on the ceiling and lock the screws (the hanging wire has been installed when it leaves the factory. The hanging wire is vertically lowered and the component is hung on the back of the LED panel light. Easy to install.

Consumers must be aware of the need to pay attention to inquire and understand whether the suspension components are standard accessories or optional parts of the manufacturer.

The third installation method: embedded.

Install the sheet metal groove on the ceiling first, and then fix a few brackets protruding outward on the back of the LED panel light, and then put the panel light in, so that the bracket is consistent with the sheet metal groove on the ceiling finch shouting board, and it can be fixed on the ceiling. However, due to the different thickness of various ceilings, it is necessary to adjust the height between the lamp surface and the bracket, otherwise it will cause the LED panel light to be higher or lower than the ceiling surface after installation.

LED panel lights are generally provided by manufacturers, and I have the LED panel light installation drawings made by Zhongshan Haomei Company here, which are very detailed.

It depends on the size of the specification, and it is generally installed directly on the ceiling!

What kind of specifications are you, send the ** over. Tao Neng Sheng LED specializes in the production of all kinds of LED lights, there are manuals, you send the picture over, I will send you the book!

The difference between the installation method of LED lamps and ordinary lamps and lanterns is that when installing LED lamps and lanterns, they must be connected to the live wire and the neutral line. Everything else is the same as a normal luminaire installation.

LED lamps and lanterns are mainly used to replace traditional lighting fixtures, most of them can be installed according to the installation method of traditional lighting fixtures, there is nothing special, you just forget a little, LED lamps and lanterns are powered by low-voltage DC, if it itself has a power supply, it can be directly connected to the city, if there is no power supply, you must pay attention to it, you need to connect to a power output port Generally, LED lamps are self-powered, so they are installed directly with ordinary lamps and lanterns, that is, special instructions, The LED tube itself has a power supply, so with the LED tube, the traditional starter and rectifier should be removed, which are useless

I make LED fluorescent lights and bulb lights.

LED fluorescent lamps can be used on the lamp stands of fluorescent lamps, which are divided into two types: one is the inductive fluorescent lamp used before, when installing, first remove the starter, and then connect the wires on the two binding posts on the rectifier to the front, cover the mask, and install the lamp; The other used to use electronic rectifiers, so the electronic rectifiers should be removed and LED lights installed. In addition, LED fluorescent lamps are divided into two kinds of built-in and external, the above is the built-in installation method, if it is external, the manufacturer will be sold with a lamp stand, so only need to connect the power cable directly to the 220V AC power.

The bulb is the simplest, and it can be installed directly on the original lamp holder, but you must pay attention to the style of the lamp head when buying, which is generally E27 spiral.

Because I don't know much about LED SMD flexible light strips, there are many customers who will miss some links when calculating the project, adding some unnecessary costs to themselves. Let's take our company's products as an example to share how to calculate the engineering installation cost of LED SMD flexible light strips:

1. The length of the LED flexible light strip: for the project, calculate the total length of the required LED flexible light strip. It should be noted here that the LED flexible light strip can be cut and used in a group of three, generally the length of each group of 60 LED flexible light strips per meter is 50mm, and the length of each group of LED flexible light strips of 30 LEDs per meter is 100mm.

After understanding this, you can calculate the actual number of LED flexible light strips that need to be used according to the construction effect design drawing. Generally, it is good to reserve a spare length of about one meter to avoid excessive procurement and waste of resources.

2. LED flexible strip power supply: Because the power supply is not distributed when purchasing LED flexible strips, after calculating the length of the required LED flexible strip, the power of the required power supply should be calculated, and then the power supply should be matched. Different LED flexible strips have different powers, so you should choose carefully for the matching power supply.

The following is a list of the power of LED flexible light strips:

0603LED flexible strip: 12V, 60pcs LEDs per meter, power per meter.

1210 LED flexible strip: 12V, 60 LEDs per meter, power per meter.

5050 LED flexible strip: 12V, 30pcs LEDs per meter, power per meter.

5050led flexible strip: 12V, 60pcs LEDs per meter, power per meter.

For example, if you buy a 5050LED flexible strip and the matching power supply is 12V, 4A specification, then a power supply can only carry 6 meters of 5050LED flexible strip. Because the power of 5050LED flexible light strip per meter is, 6 meters in total, and the rated power of the power supply is 48W, it is generally not recommended to use the power supply at full load, because that has a great impact on the life of the power supply, it is recommended to use only 95% of the power of the power supply. If 100 meters are required, the corresponding 4A power supply needs to be equipped with at least 16 units.

3. LED flexible light strip controller: For RGB flexible light strip, it must be equipped with a controller to have an effect, and the length of the LED flexible light strip that can be controlled by a controller ranges from 5 meters to 20 meters, mainly depending on which specification of the controller is selected. In this way, after purchasing RGB flexible strips, you need to purchase additional controllers according to the control length of the controller, or purchase additional RGB amplifiers (each amplifier can be extended by 5 meters).

Don't make the mistake of thinking that one controller can achieve all the control requirements of RGB flexible strips, this is the wrong view.

For example, if you buy a 100-meter RGB flexible light bar, and the controller chooses a conventional controller, that is, the control range of each controller is 5 meters. Then a 100-meter RGB flexible strip needs to be equipped with 20 RGB controllers, or buy an RGB controller and another 19 amplifiers.

Sourced from the First LED Forum.

1. Main structure and scope of application.

The LED strip lampshade is made of high thermal conductivity 6063 aluminum profile, the appearance is high-end and exquisite, and the light source uses Preh chip 5050 SMD LED imported from the United States. It is suitable for jewelry, display counters, residential villa lighting, shopping malls, hotels, office buildings and leisure places decorative lighting and other lighting places, and is an ideal lamp to replace traditional fluorescent tubes.

2. Steps.

2.According to the length of the counter, the lampshade is processed to match the length and then processed at both ends with a 45° chamfer.

3.Open through holes of diameter on the inside of the left and right ends of the counter lampshade respectively to connect with the fixed cushion block;

4.Two M3 holes are respectively opened in the lower part of the left and right ends of the lamp groove in order to be connected with the triangle block;

5.Load the lampshade to be installed into a light strip of appropriate size and connect it together through a triangle;

6.Glue the fixed block with shadowless adhesive to the inside of the glass at the opening of the corresponding left and right lampshades;

7.Fix the attached lampshade to the counter with screws;

8.Attaching the cable crossing pole;

9.Install the driver. Pay attention to the input and output ports when installing, and pay attention to the connection of the positive and negative poles when connecting the light bar. The red line is the positive wire, and the black line is the negative wire.

3. Precautions.

1.Install the LED driver and LED strip light correctly.

The drive to our company's LED light strip can not exceed 4M, and the 12V 5A drive to our company's LED light strip can not exceed 5M;

3.The power supply must be cut off before installation;

4.Product installation must be done by a professional.

<> "In order to improve the overall decoration effect of the interior, many friends will choose to install LED panel lights on the ceiling, so how to install LED panel lights? Let's learn together.

1. How to install LED panel lights.

1. Embedded installation: first remove one of the pieces of the ceiling, then put the drive of the LED panel light in the surrounding ceiling, then connect the power cable, and finally embed the LED panel light into the hole. This installation method is relatively simple and more suitable for installation in the ceiling position of cavity culture kitchens, bathrooms, shops, offices, etc.

2. Hoisting installation: first install the base of the four hanging wires on the roof, and fix it firmly, then connect the four hanging wires to the four corners of the LED panel light, then connect the drive and power cord for the LED panel light, and finally pull the height of the hanging wire to a suitable position. This installation method is more flexible and more suitable for installation in spaces with more individual decoration styles.

3. Surface-mounted installation: first fix the bottom frame of the LED panel light and the ceiling together, let the LED panel light fit the ceiling, then connect the driver and power cord for the LED panel light, and then press the LED panel light the bottom frame. This installation method is relatively simple, and it is more often the occasion when the decoration is relatively simple.

Second, what need to be paid attention to when installing LED panel lights.

1. There are many ways to install LED surface imitation plum board lights, the methods used are different, the installation steps and decorative effects will be different, we must choose according to the actual installation environment, decoration style, and their own needs when installing LED panel lights. If the user does not know how to install it himself, he should ask a professional to help install it, so as to ensure the decoration effect and quality, and avoid accidents such as accidental falling.

2. There are many brands of LED panel lights on the market, different brands, their **, size, color, installation methods and other aspects will also be different, in order to ensure the decorative effect, it is recommended that you best buy the products produced by big brands, so that the product quality is more guaranteed, even if there is a problem in the later stage, it is easier to replace.

The above is a detailed introduction to how to install LED panel lights and what to pay attention to when installing LED panel lights, I hope it can help friends in need.