Why can t the Apple phone turn on, why can t the Apple phone turn on?

The phone crashes or the system is damaged.

1. In this case, the Apple mobile phone can't be turned on when it has power, it may be that the mobile phone is in a dead state, you can also try to press and hold the power button at the same time, the power button + home button, and wait a few seconds for the phone to restart automatically.

2. If you can't turn on the phone, it should be that the system has been damaged, for this kind of problem, you can use iTunes to reflash the mobile phone system to solve it, first connect the Apple phone to the computer, and open iTunes.

3. Turn the Apple phone to the DIF state, press and hold the power button for 3 seconds, don't release the power button, then press and hold the home button at the same time for about 10 seconds, the screen turns black for about 10 seconds, then release the power button, continue to press and hold the home button for about 15 seconds, until you enter DFU mode.

4. After the iTunes software, an Apple device that needs to be modified will be detected, click the repair button, and then press and hold the shift key on the keyboard and the "Recover" option on iTunes to extract the good firmware recovery on iTunes.

5. If the above methods cannot solve the problem, then it may be a hardware failure of the mobile phone, such as: the Apple mobile phone boot button is broken, the battery is aging, etc., it is recommended to contact Apple for maintenance to solve this problem.

The battery is used up, and under normal circumstances, it may be due to the battery running out of power, which makes it impossible to turn on. Hardware failure. After plugging in the data cable, the device does not respond at all, which mostly occurs when the device has a hardware failure, and it is common to see water ingress between the devices, because the iPhone cannot remove the battery, it will always be powered on after water ingress.

What's going on with Apple not turning on:

1.The mobile phone can't be turned on, it is divided into many kinds, if there is a crash failure. Then we will not have to make a fuss, we will only have to press and hold the "Power button" and the "Home button" above the mobile at the same time.

2.If you press and hold at the same time and it doesn't turn on, remember not to let go, the press and hold time is about 10 seconds, and it will generally turn on.

iphone5 suddenly black screen can't turn on the solution:

1.In general, it may be due to the battery running out of power and not being able to turn on. If this is the case that we can't turn on, please connect the phone to the power first, if you see a charging sign on the screen at this time, and the battery is very low, it means that the battery is dead.

2.Some friends think that when they are connected to the power supply and charging, they can turn on normally. In fact, if you use up all the battery power, the charge needs to be charged to 5% before it can be turned on normally.

So in this case, please let the phone charge for a while before turning it on.

3.If you are sure that the current battery of your phone is sufficient, but it cannot be turned on normally, there may be a problem with the software system of your phone. At this time, we can try to press the "Home and Power" button of the mobile phone at the same time until the screen is lit up and there is a display.

4.If the above operation method does not work, at this time we can also connect the phone to the power supply, and then press the power and home button on the home screen at the same time to see if it can be turned back on.

Summary. There may be several reasons why your iPhone won't turn on:1

Battery Drain: Check if the battery is used up, you can charge it for a few minutes before trying to turn it on. 2.

System crash: If your phone crashes, you may need to connect it to your computer and restore the system in iTunes. 3.

Hardware damage: Your phone won't turn on because of a hardware issue, such as a screen or battery failure. If you can't turn on your phone in a few minutes, you can try connecting it to a power adapter and charging it for a while, or try to restore the system on your computer with iTunes.

There may be several reasons why the phone cannot be turned on:1Battery Drained:

To confirm whether the battery is used up, you can try to turn it on after charging for a few minutes. 2.System crash:

If your phone crashes, you need to connect it to your computer and restore it in iTunes. 3.Hardware damage:

The phone won't turn on may be due to a hardware issue, such as a screen or battery failure. If you can't turn on your phone in a few minutes, you can try connecting it to a power adapter and charging it for a while, or try to restore the system on your computer with iTunes. If none of these methods work, we recommend contacting Apple Customer Service for service.

It's been like this, first out of an apple, and then the screen goes black, and it's been charging, and it's not responding, and it can't be turned on.

Dear you try to change a data cable to recharge, this situation is generally the mobile phone power loss, with the current mobile phone power does not support the lead ant mobile phone boot required to get power. Mingming.

He just turned it on for 1 second and turned it off again, and I glanced at the four bars.

4 percent.

Dear You can recharge it with a different data cable.

1. The iPhone is out of power, which causes the automatic shutdown to be fierce.

2. The iPhone's battery is in poor contact or has been damaged, resulting in the failure to open the leather stool.

3. The hardware of the iPhone motherboard is damaged and the machine cannot be turned on.

Generally, when charging, the self-infiltrating grip bridge is turned on, and the manual boot is tried, if it doesn't work, you need to activate the battery, that is, disassemble the battery to short the positive and negative poles.

Summary. If the battery of the mobile phone is too low, you can solve the problem by charging the mobile phone at this time;

2. The boot button is damaged, and the damage to the boot button will also cause the user to fail to turn on, and the solution is to go to the repair point to find the official after-sales repair phone;

3. If the mobile phone is damaged, if the mobile phone is not out of power or a button problem, then the failure to turn on may be the damage to the mobile phone, and the solution at this time is to go to the offline maintenance point to find the official after-sales service to ask about the specific situation.

Why can't the iPhone turn on?

If the battery of the mobile phone is too low, you can solve the problem by charging the mobile phone at this time. 2. The boot branch key is damaged, and the boot button is damaged, which will also cause the user to fail to turn on, and the solution is to go to the repair point to find the official after-sales repair phone; 3. If the mobile phone is damaged, if the mobile phone is not out of power or pressing the fierce Kai key, then the failure to turn on may be the damage to the mobile phone, and the solution at this time is to go to the offline maintenance point to find the official after-sales service to ask about the specific situation.

I found that my phone was hot and out of power in the middle of the night last night, and I couldn't turn it on when I charged it today.

It's either that there's something wrong with the battery, or that something on the phone is burning. Gotta check it out.

Okay thank you.

White screen after crash.

iPhone blue screen.

iPhone won't turn on after iOS update.

iPhone reboot failed.

The iPhone won't open after jailbreaking.

iPhone stuck in boot loop.

The good news is that most of these issues can be handled at home without having to visit an Apple Store. Here are some quick tips that you can apply to turn on and fix your iPhone.

Fix iPhone won't turn on.

These methods have been demonstrated by many friends, and our technical service team has also recognized them, because if the Apple mobile phone is used normally, there are generally few major failures, and the following methods can be operated by yourself.

1.Charge and wait.

One of the most common reasons behind iPhone unresponsiveness is a completely drained battery. If you haven't used your Mac for a long time for some reason, and now you want to use your Mac, but you find that it can't be turned on properly, your first reaction should be to charge.

Battery Drained:Plug it into a charging power source and use the original Apple charging cable. Generally speaking, we don't need to worry, after the Apple mobile phone is charged for a while, his mobile phone intelligent sensing system knows that the power is enough to support, and the Apple mobile phone will automatically turn on, so it will be better to see that the mood here, the Apple mobile phone here is like a car that has not been driven for a long time, and the fuel tank is all dry, so it will definitely not be able to start, let alone walk around.

If your iPhone won't turn on after charging, you can move on to the next method.

Troubleshooting:

1. When the iPhone suddenly goes black, freezes, can't turn on, and there is no response, you can try to press and hold the power and home buttons on the home screen at the same time and keep them for more than 10 seconds. If you can see it, you can't force it to restart.

2. If the forced restart is successful, you can see an Apple logo on the screen. After the reboot is successful, it can be used normally.

3. Of course, sometimes it may be because of the lack of power, resulting in automatic shutdown, no matter how you operate, you can't turn on the phone, when you encounter this situation, please connect the iphone to the power charger first.

4. If it is automatically shut down because of the lack of power, a battery icon will appear on the screen at this time.

5. In addition, the battery of the iPhone must be charged to more than 5% before it can be turned on normally, if the power is very low, please let it charge before turning it on.

There are several possibilities for this to happen on your phone:

1. Check whether the charger is plugged in well with the power socket, and you can unplug it and plug it back in.

2. Check whether the mobile phone charging data cable is well connected to the mobile phone charger interface.

3. Use the original charger data cable for charging.

4. Replace the battery with a new one.

5. If none of the above methods work, it is recommended to send the mobile phone to the mobile phone store for repair.