What do I need for a projector installation? I don t know anything, I just want to buy one

First, determine the installation distance and projection distance; Secondly, install the screen, which cannot exceed the zoom range of the projector; Then, to place the home projector and switch, first set the center point for zooming; After that, install the bracket, and the lens should be in the center of the screen to avoid distortion of the picture; At the same time, the cable is drawn from the ceiling to avoid interference and facilitate maintenance; Finally, test run the projector.

1. Determine the installation distance and projection distance Before the installation work, assume a position, which needs to be aligned to the middle position for the distance between the projection screens, and the height of the hanger should also be aligned with the projection screen, and this distance basically determines the size of the screen size; The projection distance is related to the size of the projection screen, the larger the projection distance, the larger the size of the picture, the smaller the projection screen, the smaller the size of the picture, so we can adjust it according to actual needs.

Second, install the screen This step should first take into account the zoom range of the projector, when installing the screen, it should be noted that it cannot be outside this range, if it exceeds this range, the picture may not be clear, or there are diagonal lines and other phenomena that affect the perception; For home projectors, its zoom range is limited, and it needs to be manually moved to adjust to the right position.

3. Place the home projector and switch First of all, the center point of the zoom should be set, how can we move the projector according to this point, and you can intuitively see whether it is complete The entire screen is full, so this step requires us to have enough patience to adjust the position to the most suitable place.

Fourth, the installation bracket needs to be firmly fixed on the ceiling, in the suitability of this step, we should note that the lens of the home projector should be in the center of the screen, so as to effectively avoid picture deformation; If you don't notice this point during installation, the problem on the picture can also be adjusted later, but the effect will not be so good, and it will also cause some damage to its picture quality, so you can pay a little attention and try to avoid this problem.

Fifth, pull in the cable from the ceiling The cable is installed through the ceiling for our long-term use needs, it is the simplest and most convenient way, it can give us a clear vision, and it is also more reasonable for the placement of cables, and at the same time, it can also avoid mutual interference between different cables of the projector, and it is also convenient for the implementation of maintenance work that may be needed in the future.

Sixth, the trial operation of the projector after the installation of the test, if the effect is better, you can; However, if there is an inappropriate size or tilt, we need to continue to adjust it, so that the projector is in the most comfortable state for us.

It's usually installed in a package.

If not, it's not hard to explain.

You can do it by following the instructions.

It's as simple as following the instructions and plugging it in. If you want to install the base, you may need large screws to fix it.

To install a projector on the ceiling of a bedroom or living room, you need a plug. After the projector is bought, you can contact the manufacturer for installation services.

Of course, it is necessary to choose the right location, and the specific need is ** instruction manual.

First, the installation method of the projector:1. Decide the size of the picture you want to project, and then calculate the projection distance according to the projection ratio.

2. Determine the hoisting position of the projector through the rangefinder, and then mark it with a marker.

3. Use a hand drill to punch holes, and then fix the hoisting bracket with expansion screws.

4. Align the hoisting hole of the projector with the bracket, and then use a screwdriver to fix the installation.

Second, take computer projection as an example, the use of the projector is as follows:

Tools Raw materials: Supermicro X8dal Main Server Chassis, Windows 10 Professional.

1. First, right-click the mouse and click Personalization, as shown in the following figure:

2. Click Display, as shown in the following figure:

3. Select Change display settings, as shown in the figure below

4. Select Connect to the projector as shown in the figure below

5. Select Extension, as shown in the following figure:

6. Click OK to finish, as shown in the following figure

7. The final projection can be completed, as shown in the figure below

When installing a projector at home, it is generally necessary to lay out four sockets.

The socket of the curtain is often opened on the top, and if the projector is also hoisted, it is to leave two sockets on the top. This will make it more convenient for us to use.

In terms of wiring, there are two different ways to choose from: open wire and dark line.

Walking the bright line is to let the line be exposed to the outside to see the place, although a little messy, but it is convenient to set up, suitable for the small partners who have been hardcovered; To take a dark line is to make a groove in the wall and hide the line in the wall or ground.

Therefore, the buried dark line is to dig the wall and plan, which is suitable for users who are still in the decoration stage. There are a total of three projector socket wiring to consider, including two HDMI cables and one audio cable, corresponding to the input and output of the projector respectively.

Commercial projectors, about 5000 (there may be merchants who take commercial ones to you) are general household machines with many models.

The better ones are tens of thousands to more than 100,000.

General configuration: projector, screen, hanger (bracket), cable, TV box (for TV).

Follow these steps to install the projector:

1.Hoisting. a.According to the manufacturer of your projector, check the projection distance range of the projector of this model. to obtain the distance from the screen to the projector. Generally, you can get it through the official website or consult the superior ** business.

b.Make sure that the hanger is installed perpendicular to the curtain surface.

c.Follow the projector hanger accessories well and drop them onto the shelf. Be careful not to tighten the adjustment screws.

d.The height of the ceiling projector is slightly higher than the top of the screen.

e.The image after hoisting is upside down, as long as the image is flipped with the remote control, the best projection effect can be adjusted. Then fix the hanger screws to prevent the projector from swinging at will.

2.According to the method of bracket installation or placement on the desktop, you can first follow steps A and B above, and then find the best position according to the effect.

The projector interface is generally VGA, there are DVI, HDMI is rare! The notebook is easy to connect, and you can directly connect the extended display interface of the notebook to the projector with a VGA cable. If it's a desktop, connect it directly to the jack where the monitor is connected!

Depending on what requirements you have, the easiest is to put it directly on the table, connect a laptop or desktop, or use a hanger to hoist it, or you can buy a mobile triangle cart or instrument cart or the like, in short, it is still according to your on-site situation to choose.

1.Install the hanger: punch the upper screw to adjust the position.

2.Turn on the machine and select the hoisting mode and then slowly adjust the screws on the hanger.

, and then tap "fn"+ in the bottom left corner"f7", switch the display position, switch to the projector, OK

Open the control panel and there are adding.