How to unblock the clogged drain hole in the refrigerator compartment

Hunan Jusheng Drilling Company can drill deep-water wells, Hunan Changde, Jishou No. 1:

1.If the drain hole of the refrigerator is blocked by ice accumulation and cannot drain water, disconnect the refrigerator from the power supply first when cleaning. After emptying the contents of the refrigerator compartment, open the door of the refrigerator compartment and let it sit for a period of time to allow the ice in the drain pipe to melt.

2.The drain pipe of the refrigerator was clogged with accumulated ice. Generally, the low temperature inside the refrigerator causes the refrigerator drain hole to be blocked by frost, or some food or vegetable residues that have not been cleaned up in time inside the refrigerator enter the drain pipe and block the pipe.

When cleaning, look for a bike pump. The diameter of the air tube of this pump can be close to the size of the refrigerator drain hole.

3.When using this pump, the upper fitting is removed to expose the trachea.

4.Insert the air pipe of the water pump into the drain hole of the refrigerator, then pump the water hard to make the drain pipe of the refrigerator through, then inject a small amount of clean water into the drain hole of the refrigerator, and then rinse the water pump repeatedly to pour out the water in the water supply tray of the refrigerator. Simply install the fridge's baffle.

II: 1When food debris enters the refrigerator and causes the refrigerator leak hole to be blocked, we need to cut off the power of the refrigerator first when cleaning.

2.After that, the long plastic plug is removed from the refrigerator drain hole, and then inserted into the refrigerator freezer drain hole with a long strip for unclogging.

3.After the above steps are completed, take a glass of water and pour it into the refrigerator drain hole. If water easily enters the drain hole of the refrigerator, the drain hole of the refrigerator has been unblocked.

A geothermal well was drilled on Fengcheng 5th Road before. Now most of them are digging wells in Inner Mongolia and northern Shaanxi. Like you said, there are certainly no plastic tube wells in Xi'an, not even in the whole country.

When <> refrigerator drain hole is clogged, you can try the following methods to unclog it:

Use a straw or cotton swab to clean up: insert the straw into the drainage hole and forcefully suck out stagnant water and debris; Or use a cotton swab to clean up slowly.

Make Heng Fanghong clean with hot water: pour hot water into the drainage hole, wait for a period of time and then pour it out, you can wash out the clogged debris.

Use vinegar water to clean: Mix white vinegar and water in a ratio of 1:1, pour it into the drainage hole, and leave it for a period of time before pouring it out, which can have the effect of cleaning and removing odors.

Use a professional cleaner: You can buy a professional refrigerator cleaner, use it according to the instructions, unclog the drain holes and clean the inside of the refrigerator.

It is important to note that you should be careful when cleaning the drain holes to avoid pushing debris into the refrigerator, and at the same time, you should clean and maintain the refrigerator regularly to avoid the drain holes being blocked again.

1.Clean the drain holes: First, you need to find the zen drain holes of your refrigerator, which are usually located at the back or bottom of the refrigerator.

Use a long, slender needle or toothpick to gently clean the drain hole to remove dirt and debris from it. 2.Use a vacuum cleaner:

If there is a lot of dirt in the drain hole, you can use a vacuum cleaner to suck the dirt out of it. Aim the nozzle of the vacuum cleaner at the drain hole and suck out the dirt with a low-grade He Chaoxiang suction. 3.

Use hot water: Pouring some hot water into the drain hole will soften the dirt in it, making it easier to clean up. However, care needs to be taken not to pour overheated water into the drain hole plum pie to avoid damaging the refrigerator.

4.Use an alkaline cleaner: If the dirt in the drain hole is stubborn, you can use some alkaline cleaner to clean it.

Pour the detergent into the drain hole, wait for a while and then rinse it off with clean water. 5.Regular cleanup:

In order to avoid the refrigerator drain hole from becoming clogged again, it is recommended to clean the drain hole regularly. It can be cleaned every once in a while to keep the drain hole clear.

When the refrigerator drain hole is clogged, the following methods can be taken to unclog it:

1.Power outage: First, make sure to disconnect the refrigerator from power to avoid electric shock or other safety issues.

2.Clean the surface of the drain hole: Use warm water and mild dish soap or soapy water to remove dirt and blockages from the surface of the drain hole by gently wiping the surface with a soft brush or cotton swab.

3.Unclog the drain hole: You can use a long, thin tube (such as a toothpick, braided wire, etc.) and gently insert it into the drain hole, gently rotating or moving it up and down in an attempt to remove the blockage. Be careful not to use too much force to avoid damaging the drain holes.

4.Cleaning the sink and drain pipes: Pour in a small amount of a mixed solution of warm water and bleach (or white vinegar aqueous solution) and use a soft-bristled brush or sponge to wipe down the sink and drain inside the refrigerator for further cleaning and disinfection.

5.Rinse and dry: Finally, rinse the drain holes and sink with clean water, making sure there is no residual detergent. Use a clean rag or paper towel to dry the sink and surrounding area, making sure it is thoroughly dry.

Please note that the above method is suitable for messy potatoes in the case of blocked refrigerator drain holes. If the problem persists or cannot be resolved, it is advisable to consult a professional repairer or contact the refrigerator manufacturer's customer service department for further help and advice.

If the drain hole in the refrigerator is clogged, you can try the following methods to clear and dredge:

Power off:Before dealing with the circuitry of any appliance, make sure to turn off the power and unplug it. This is the first step to ensuring safety.

Locate the drain hole:The drain hole is usually located at the bottom or rear of the refrigerator. Open the refrigerator door and find the drain hole, which is usually a round or oval hole.

Use a straw or soft cloth:Using a straw or a soft strip of cloth, gently insert it into the drain hole to remove the blockage. If the blockage is hard, you can use some detergent to soften it before using a straw or cloth strip to remove it.

Use professional tools:If you can't use a straw or cloth strip to clear the blockage, then you may need to use some professional tools to clean the drain hole. For example, buy a tool called a "drain hole washer", which is usually a spiral-shaped tool with a soft brush that can easily remove blockages from drain holes.

Seek professional help:If you've tried the above methods and still can't clear the blockage, it's best to seek professional help. Ask a professional appliance repairer to clean the drain holes in your refrigerator, and they may have more advanced tools and techniques to fix the problem.

It is important to note that when dealing with drainage holes, it is important to ensure your own safety and follow the steps above.

When the refrigerator drain hole is blocked, you can try the following methods to dredge:

1.Power outage and de-icing: First, disconnect the power supply to the refrigerator, remove the food from the refrigerator, and thaw the freezer and freezer. This prevents the water from causing chaos during the dredging process.

2.Locate the drain hole: At the bottom of the freezer or cold compartment, usually near the rear wall, there will be a drain hole. It is a small hole or trough that is used to drain raw ice and water from the inside of the refrigerator.

3.Clean the drain hole: Use a long, slender object, such as a straw, needle, or thin stick, and gently insert it into the drain hole in an attempt to remove the blockage. Be careful not to use too much force to avoid damaging the drain holes.

4.Flush the drain hole: Pour warm water or water mixed with mild detergent into the drain hole. Inject water with light pressure to help flush the drain and flush away any residue. The use of a funnel makes it more convenient to inject water into the drain holes.

Clogged refrigerator drain holes may cause water to accumulate inside the refrigerator, affecting the cooling effect and food storage. Here are some ways to unclog the drain holes in your refrigerator:

1.Clean up with a small needle or toothpick: First unplug the refrigerator by powering it off, then use a small needle or toothpick to gently clean the dirt and foreign objects inside the drain hole. Be careful not to push too hard to avoid puncturing the drain hole.

2.Rinse with vinegar water: Mix white vinegar and water in a ratio of 1:1, then pour the mixture into the sprayer, let it spray on the drainage hole, wait for a few minutes, then gently brush with a soft brush, and finally rinse with water.

3.Use baking soda powder to clean: Mix baking soda and water in a ratio of 1:1, then pour the mixture into the sprayer, let it spray on the drain hole, wait for a few minutes, then gently brush with a soft brush, and finally rinse with water.

4.Use a specialist cleaner: There are some cleaners on the market that are specifically designed to clean your refrigerator, just follow the instructions on the instructions.

It should be noted that when cleaning the drain holes of the refrigerator, you must pay close attention to safety to avoid scalding or spilling the detergent. In addition, it should be cleaned in time after each use to maintain hygiene. If it cannot be dredged by the method of fast shed, it is recommended to seek professional maintenance services.

The blockage of the refrigerator drain hole will lead to water retention inside the refrigerator, which will affect the use effect and hygiene. Here's how to unclog the fridge drain hole::

1.Find the drain holes: The drain holes are usually located on the backdrop or bottom of the inside of the refrigerator, close to the condenser or even under such an area.

2.Clean the drain hole: Use a hose or cotton swab or other tools to clean the drain hole to remove impurities or residues, and do not use sticks or other sharp tools to dig out the residue in the hole, so as not to scratch the inside of the refrigerator.

3.Clean the drain: If there is already a build-up of water inside the drain, you need to clean it with a damp cloth or watering can to ensure that it is clean.

4.Make sure the drain is unblocked: if the drain is not fixed, it needs to be inspected; If it is clogged, you can try cleaning it with a small wire.

The above is the method of blocking and dredging the drain hole of the refrigerator, and you can know the source to carry out the corresponding operation according to your actual situation and the tools you have.

Summary. First of all, turn off the power of the refrigerator, empty the refrigerator room, open the refrigerator door to melt the ice, remove the baffle behind the refrigerator, prepare the bicycle pump, the diameter of the air pipe is close to the size of the refrigerator drainage hole, insert the air pipe of the pump into the refrigerator drainage hole, repeatedly inflate the drain pipe to make the drain pipe through, inject a small amount of water into the drainage hole, rinse repeatedly with the pump, and finally install the baffle.

First of all, turn off the power of the refrigerator, empty the refrigerator room, open the door of the refrigerator to melt the ice, remove the baffle behind the refrigerator, prepare the bicycle pump, the diameter of the air pipe is close to the size of the refrigerator drainage hole, insert the air pipe of the pump into the refrigerator drainage hole, repeatedly inflate the drain pipe to make the drain pipe through, inject a small amount of water into the drainage hole, rinse it repeatedly with a group balance gas cylinder, and finally install the upper baffle to do it.

The ice is too thick and the ice helmet is hot, and the ice melts first.

Use a knife to remove the ice.

1. Power off, boiling water The location of the drainage holes in each refrigerator is basically the same, so if you want to clear the blockage of the drainage holes, you should pay attention to the power supply first, so as to ensure safety, and you need to prepare a pot of hot water.

2. Clean the refrigerator and find the drainage hole Take away all the things that should be in the refrigerator, use a small shovel to cut the ice cubes, and shovel away all the frost, so that you can clearly see the drainage hole.

3. Open the back cover of the refrigerator Next, you need to find the location of the compressor on the back cover of the refrigerator, which should be a white plastic box, and there will be a very distinct drainage hole next to it.

4. Use the wire to dredge the prepared wire from the drainage hole of the refrigerator to the inside, if you can't do it, you can make it into the shape of an ear scoop, and dig out some sundries, so slowly dig, according to the length of the drainage hole, increase the length of the wire appropriately, which is a method of dredging.

5. Inflatable pump This step is mainly to completely clean out the debris in the drainage hole, the pump is not too big, and it must be able to be put in the refrigerator. After finding the exhaust hole, connect the pump and pump it inside, during which you can use various tools to plug the gap, it is best to connect the other end of the exhaust hole with the water basin, if there will be bubbles in the exhaust hole connected to the water basin every time, this means that it has been completely unobstructed, and you can play a few more times.

6. Hot water irrigation can use a large needle tube, you can also use a plastic funnel, pour water into the drainage hole of the refrigerator refrigerator along the street, hot water can soften the blockage inside, and then it is easy to discharge, if there is an air pressure water gun it is better. After knowing how to clean the drainage holes in the refrigerator, you should also prepare some supplies for cleaning the refrigerator at home from time to time.

Refrigerator drain hole syringe, this product is specially designed to clean the refrigerator drain hole blockage, in fact, it is a large needle tube connected to a very long and thin tube, but it is very practical, it will be of great help to prepare one at home. Refrigerator de-icer, the main form of this product is in the form of spray, when the refrigerator is powered off, spray on the ice and frost and wait for a few minutes to see the signs of melting, very easy to use.

1. Turn the refrigerator off. Then see what is blocking the refrigerator, and after emptying the contents of the refrigerator, you need to leave the refrigerator for a while. This is done so that the ice in the drain can be melted.

2. Remove the baffle behind the refrigerator. Care needs to be taken to check the water pan for moisture or moisture. If there is no water in the basin, it means that the drain is blocked.

When the drain hole is blocked, and the refrigerator temperature is too low, it is often easier to cause the drain hole to freeze and block. Or some people are because the impurities in the refrigerator are not cleaned up in time or vegetables enter, and the pipes are blocked.

3. Use a bicycle pump to dredge. At this time, you can use a bicycle pump or pump to dredge it. At this time, you need to pay attention to the diameter of the air pipe of the pump, it is best to close the size of the refrigerator drain hole, you can insert the drain hole, but not too loose.

Fourth, pour out the things that have been washed down in the tray and water, and then go to install the tailgate.