How to dredge the blocked drain pipe of the air conditioner, how to clean the blocked drain pipe of

Air conditioner drain pipe dredging method:

1. It is difficult to clean the air conditioning drain pipe, and there are many professional air conditioning drain cleaning liquids on the market, we can mix the cleaning liquid with water and pour it into the air conditioning drain pipe for cleaning.

2. Before cleaning, remove the drain pipe first, and then rinse it with mixed water, which can remove some simple dust and stains.

3. If the drain pipe is not easy to disassemble, we can directly use some external force, such as a vacuum cleaner, to vacuum directly from the outside of the pipe.

Air conditioner cleaner effect

After the air conditioner is used for a period of time, there will be many problems such as strange smell, refrigeration effect decline, electricity consumption, air output decrease, etc., air conditioning cleaning agent is a professional product to solve air conditioning pollution, and its active ingredients can penetrate deep into the heat sink inside, decontamination and effective killing of germs at the same time.

Product efficacy. 1. Innovate the professional technology of "spinning the net core", strengthen the compound of sterilization and decontamination factors, and complete the cleaning and sterilization simultaneously.

2. Deep cleaning: The powerful air pressure spray penetrates deep into the heat sink, and the national enterprise technology center has proved that the decontamination effect is remarkable.

3. Strong sterilization: Tested by the Center for Disease Control and Prevention, the sterilization rate is as high as high, reaching the disinfection level.

4. Safe and reliable: mild and safe, passed the anti-corrosion test of the Center for Disease Control and Prevention, and can be used with confidence.

5. Energy saving and power saving: the refrigeration effect is stronger, and it has won the title of Shanghai energy-saving product.

6. Easy and convenient: after spraying the product, there is no need to clean it with clean water, and the sewage will be automatically discharged with the drainage pipe.

The drain pipe of the air conditioner is blocked, and the method of cleaning it is as follows:

Tools Raw materials: Oaks air conditioner KFR-25GW, screwdriver, mineral water bottle, fine wire, brush.

1. First turn off the power of the air conditioner, remove the panel from the front, the air conditioner shell is stuck with two small card slots, and gently pull the panel outward.

2. Then remove the iron plate of the electric control box, and then remove all the screws of the front frame of the air conditioner; After exposing the condenser and sink, remove the water tank for cleaning; Clean and brush the condenser to prevent the dust and dirt of the condenser from entering the drain pipe with the water and causing secondary pollution.

3. Then fill the mineral water bottle with water, rinse the drain pipe, and rinse it several times to see if it can be dredged. If there is still a blockage, there may be a lot of blockage, you can use a thin wire to dredge, take out the blockage, and then rinse with water until the drainage is smooth.

Precautions for cleaning the air and pure regiment

1. Before cleaning, we must ensure that the power supply of the air conditioner has been turned off to ensure personal safety, and if you need to use a brush to brush the foam evenly during the cleaning process, you should brush the brush along the direction of the fins to avoid damaging the fins. During the cleaning process, the trouser should pay attention to the cleanliness of the floor.

2. When cleaning the filter screen, the dust accumulation is relatively small, which can be cleaned with water or sucked with a vacuum cleaner, and when the dust accumulation is serious, it can be soaked in water containing neutral detergent for 10-15 minutes. Rinse and dry and place in a cool place to dry, do not heat or dry on high heat.

3. To clean the air conditioner shell, especially the display panel, be sure to wring out the water in the rag and wipe it before wiping, so as to avoid the water entering the panel and causing a short circuit and power, damaging the air conditioner.

How to fix a blocked air conditioner drain?

1.When the air conditioner does not drain well, fix it yourself. First, to turn off the power, use a Phillips screwdriver to open the front panel and partition to reveal the condenser.

and drainage troughs. Once the mineral water bottle is filled with water, rinse the drain along the sink. Rinse a few times to see if you can dredge it. If not, dredge it slowly with a thin wire. Remove the blockage and rinse with water until it drains smoothly. This maintenance method is only used for foreign body blockages.

2.If the air conditioner's drainage is blocked due to an unbalanced position, it may be due to the expansion screws installed on the indoor unit.

Unstable, the unstable installation affects the balance, resulting in a high position on the outlet side of the drain pipe, resulting in a blockage of the drain. At this point, there is an option to move the air conditioner.

With a normal level gauge.

Recalibrate the position of the air conditioner and trim or lower the outlet end of the air conditioner condensate pipe as much as possible.

3.The long use of air conditioners can cause the drain pipe to age, slack or bend into a wavy shape, resulting in poor drainage and local blockage. This requires * maintenance personnel to come to replace the drain pipe, or buy an ordinary PVC thin pipe to replace.

However, outdoor units are difficult to build, and removing the protective tape is also cumbersome.

Dredging method for blocking the drain pipe of the air conditioner: 1. Turn off the power supply, open the front panel and partition with a cross cone, and expose the condenser and drainage groove; 2. After filling the mineral water bottle with water, rinse the drain pipe along the sink; 3. Rinse several times repeatedly to see if it can be dredged, if not, you can use a thin wire to dredge it slowly; 4. Remove the blockage and rinse it with water until the drainage is smooth. The drain pipe is connected to the air conditioner unit, which involves aerial work, for your safety, please contact the maintenance personnel to deal with it.

1. Turn off the power and open the front panel and partition with a cross cone to expose the condenser and drainage groove. 2. After filling the mineral water bottle with water, rinse the drain pipe along the sink; 3. Rinse several times repeatedly to see if it can be dredged, if not, you can use a thin wire to dredge it slowly;

4. Remove the blockage and rinse it with water until the drainage is smooth.

Clogged air conditioner drains are a common problem with wide canopy Kai and can be unclogged by the following methods:

1.Use wire or bamboo sticks: First, turn off the power on the air conditioner. Then, gently insert a wire or bamboo skewer into the drain to remove the blockage as much as possible. Be careful not to overexert force to avoid damaging the drain.

2.Use hot water: Pour some hot water into a clogged drain. The temperature of the hot water softens the blockage and allows it to flow easily.

3.Use chemical cleaners: There are some chemical cleaners in the market that are specifically designed to clean drains, and these products can be tried.

According to the product instructions, pour an appropriate amount of detergent into the drain pipe, then wait for some time for the detergent to dissolve the blockage, and then rinse with water.

4.Seek professional help: If the above methods do not unclog the drain, or if you are unsure of how to proceed, it is advisable to seek professional help. Contact a professional aircon repairer who has the experience and the right tools to fix the drain blockage problem.

In conclusion, clogged drains are a common problem, but they can be solved with the right methods. If you can't solve it yourself, don't force it, it's best to ask a professional to fix it. Call with caution.

When the aircon drain is clogged, you can try the following methods to unclog it:

1.Clean the drain outlet: Locate the drain under the air conditioner's indoor unit, which is usually located at the bottom of the fuselage. Use a soft-bristled brush or toothbrush to clean the drain to remove clogged dust and dirt.

2.Use a pipe cleaner: You can purchase a cleaner specifically designed to clean pipes and pour it into the drain as instructed in the instructions. Allow the cleaner to work in the pipes for a while, then rinse with clean water.

3.Manual unclogging: If the blockage is severe, a soft metal wire or plastic pipe can be used to manually unclog. Insert a wire or tube into the drain and gently push to remove the blockage. Be careful not to use too much force to avoid damaging the drain.

4.Pour hot water: If the blockage is caused by the accumulation of dirt, you can try pouring hot water to dredge it. Carefully pour hot water into the drain, the temperature should not be too high to prevent burns, and let the hot water play a role in dissolving the blockage.

If you still can't fix the problem after trying the above methods, or if you are not sure how to proceed, it is recommended that you contact a professional aircon repairer to deal with the blockage problem to avoid causing more damage.