How to take out the water pipe joint that is broken in the wall?

Use the saw blade to cut a few more small grooves in the broken place, and then find a strong word knife, shave it out with a hammer, and then it is best to find an inner hexagon joint and screw it in, so as to clean the wire mouth.

A joint is a component used to connect water pipes. Water pipe joints can be divided into male thread end fittings, ferrule water pipe fittings, and self-retaining water pipe joints according to the way of use.

Zinc alloy for male end-connect water fittings.

The material is made of die-casting, and the surface is galvanized, frosted, or chrome-plated; The structure is compact, no pores, and the strength is high.

The compression type water pipe fitting can connect the unthreaded steel pipe with the hose, eliminating the threading process, and only need to screw it in; The structure is compact and the strength is high. The self-fastening water pipe fitting can connect the unthreaded steel pipe or the unthreaded equipment outlet with the hose, eliminating the need for threading; It is made of zinc alloy material die-casting, and the surface is galvanized, frosted, or chrome plated; The structure is compact and the strength is high. It is widely used in high-end buildings, hotels, hospitals, buildings, gymnasiums, museums, and government agencies.

Villas, residential complexes.

Hello! 1。A professional plumber will find a square cone-shaped metal object of appropriate size, knock it into the thread buckle broken in the joint to squeeze it tightly, and then use a wrench to unscrew the square cone and the broken thread buckle easily.

2.Use the broken saw blade to saw one or two grooves in the inner hole, and use a hammer and a screwdriver to knock the saw groove along the circumference to exit the broken thread.

It only represents a personal opinion, don't spray if you don't like it, thank you.

Solution: Find a professional master, who will bring pipes, joints, plugging, and water-stopping tapes to solve this problem.

At the fracture, use a marker pen to draw the exact route to be cut, close the main valve of the water pipe, hold the stone cutter tightly with both hands, and start cutting along the marked line, and the cutting depth should be controlled within the range of taking out the water pipe.

Carefully remove the cut wall with a pickaxe, the process should be gentle to avoid damaging the wall that does not need to be cut, locate the broken water pipe joint, use the water pipe cutter to cut the broken water pipe joint from both ends of the water pipe, and replace the joint by connecting the new joint to both ends of the water pipe at high temperature using a hot melt.

Precautions: Hold the cutter tightly with both hands when cutting to avoid danger. When cutting, water is continuously poured on the cutting disc to cool down the high temperature generated during cutting.

Sorry, the only way to do this is to tear down the wall and replace it.

It is possible to find a property.

Locate the broken part and use a marker pen to draw the precise route that needs to be cut.

Close the main valve of the water pipe, hold the stone cutting machine firmly with both hands, and start cutting along the line segment drawn by the marker, and control the depth of the cutting to just take out the water pipe.

Use an electric pickaxe to carefully remove the cut wall, and this process should be gentle to avoid injuring the wall that does not need to be cut.

Locate the broken water pipe fitting and use a water pipe cutter to cut the damaged joint from both ends of the water pipe.

Use a fuser to fuse the new fitting to both ends of the water pipe at high temperature to complete the replacement of the joint.

Open the main valve of the water pipe, check whether the welded joint is leaking, and if there is water leakage, it should be re-welded.

Cover the repaired water pipe with cement, and then use a stone cutter to cut out a suitable tile and stick it on it.

Precautions: When cutting, you should hold the cutting machine tightly with both hands to avoid danger, and use water to continuously pour water on the cutting blade to cool the high temperature generated during cutting.

Emma, I thought it was my family.

I've asked all kinds of questions, 2 ways, to dig up the broken ground, and then connect to the external connection no need to ask, there is no other way, just these two methods, the first method is the most troublesome, and it is not good to plane for a long time is not a place.

After all kinds of inquiries on the Internet, I finally decided to take it out.

Do it yourself. The hardware store bought some pipes, joints, plugging, and water-stopping tape, and bought a pipe on the Internet to heat things, I didn't know these things, the hardware store owner told me, and I checked it on the Internet.

You can also find a worker, the project is not big and you can win about 200 people, and the project may be hundreds larger.

This can only be suggested that you find a worker, and you have to pry open the wall to pick it up.

If the glue is broken, it can be replaced, if it is an iron pipe, you can only use a big nail, against a broken section, use a hammer to hit the big nail with moderate force, into an anticlockwise direction angle, if the section is broken.

First, use the "pipe cutter" to cut off a small section of the broken pipe head, and then use the "pipe expander" to expand the bell mouth.

It is recommended that it is best to find a professional water and electricity installation staff to get it.

Everyone knows that water and sewage in life are inseparable from water pipes, taking into account the overall aesthetics of the family when decorating, the water pipes are generally embedded in the wall, if the operation is not standardized, how to take out the water pipe joints are broken, and what to do if the wire buckle in the wall is broken and leaking? Hurry up and find out through today's article!

How to take out the water pipe joint when it is broken

1. You can go to the local building materials market to buy a water pipe joint extractor, then rotate the extractor clockwise, screw it into the broken joint, and then rotate it counterclockwise to take out the broken joint.

2. Prepare a pair of needle-nose pliers, a cone and a hammer, then use the hammer and a cone to smash the broken water pipe joint, and then use the needle-nose pliers to take out the smashed water pipe joint.

What should I do if the thread in the wall is broken and leaking?

1. If the inner wire of the water pipe in the wall is damaged, the water leakage will occur, and the main sluice of the tap water should be closed first.

2. After finding the leakage point, use a tool to knock open the wall, and if the damage is not serious, use hot melt adhesive or glue adhesive to block the leakage.

3. If the water leakage is very serious, it is necessary to replace the inner wire accessories, and it is best to replace it with a *** one, so as not to cause secondary leakage and imitation of water.

3. Finally, restore the knocked wall to its original state.

How to take out the water pipe joint is broken, and what to do if the wire buckle in the wall is broken and the water leakage is sold, and the details are sorted out here for everyone.

If the water pipe on the wall is connected or the head is broken, you can consider taking the following steps to repair it:

1.Close the water valve: Before repairing the water pipe, you need to close the water valve to prevent the water from continuing to flow out. If you can't find the water valve, you can try turning off the main water valve, which is usually located outside the house.

2.Disconnect water pipes: Use a pipe wrench or similar tool to disconnect a broken water pipe to make repairs easier.

3.Remove the old fitting: Using a pipe wrench or wrench, remove the old fitting from the water pipe, making sure to remove any residue so that the new fitting can be installed.

4.Install the new fitting: Insert the new fitting into the water pipe to make sure that the fitting fits perfectly with the water pipe. Use a pipe wrench or wrench to tighten the fitting securely.

5.Check for water leaks: Check for leaks in new fittings before reopening the water valve. You can try to seal the water pipe with a hose plug or similar object, and then open the water valve to check for water leakage.

6.Reopen the water valve: If there is no leakage, you can reopen the water valve and restore the water supply.

If you encounter difficulties during the repair process or are unsure of how to carry out the repair, it is advisable to seek the help of a professional plumber.