Huawei Play4 mobile network does not exceed 150k s for what reason 5

1. If a metal protective case is used, please remove the protective case and check whether the signal returns to normal. The metal case may have an impact on the device's antenna, resulting in a weak signal.

2. Please try to rotate the direction of the phone and the way you hold the phone to see if the signal improves. If your hand is completely blocking the top of the phone, there may be some blocking of the signal.

3. If the signal is weak near a certain location, it is recommended that you move to another location to see if the signal has improved. When you are in an environment with interference sources such as microwave ovens, or when there is an obstruction, the signal will be weak.

4. Please stay close to the router about 2 meters to see if the signal has improved. If the router is far away, it is recommended to switch the router to the GHz frequency band, which has a strong ability to penetrate walls.

5. If the above methods do not solve your problem, please back up your data in advance and go to a nearby Huawei Customer Service Center for maintenance.

2. You can also have an after-sales outlet query address entrance at the bottom of the official website page of Huawei**;

The network is not good, this adjusts the network.

What are MBPS, KBPS, BPS, KB, MB and their conversions and differences.

Mbps stands for MilionBit Pro Second;

kbps stands for kilobit pro second;

bps stands for bit pro second;

The unit of velocity, bit is bit, usually represented by b (lowercase), refers to a binary bit, milionbit=1000kilobit=1000000bit;

So 1mbps = 1000 000bps;

This is the unit of bandwidth that is commonly used to measure bandwidth, and refers to the number of binary bits transmitted per second;

Usually, the speed displayed on the software refers to the number of bytes (bytes) transferred per second, which is usually represented by b (uppercase);

MB stands for megabytes, also known as megabytes;

KB stands for kilobyte;

b is the byte; The relationship between them is 1MB=1024KB=1024*1024B;

1b=8b；

Therefore, 1M bandwidth means 1Mbps = 1000Kbps = 1000 8Kbps = 125Kbps;

The bandwidth of 2M and 3M is 250Kbps and 375Kbps, respectively.

Suppose you want to convert 10kbps, then there is 10kbps=10000bps=

The unit of measurement k for data transfer rate is the decimal meaning, but the k for data storage is the binary meaning.

1kbit s is 1000 bits s, and kb is 1024 bytes, pay attention to the difference between kb and kbit, in addition, the unit of data transfer rate is bits s is denoted as: bps.

In practical applications, 1kbps = 1000bps, 1mbps = 1000,000bps

There is a difference between 1bps = 1mbps and 1ms s, 1ms refers to 1024kb s

And 1Mbps refers to 1000 8kb s, which is 125kb s, remember that k and k are no different, the difference is that bps belongs to the unit of bits per second, and m s, kb s these two belong to bytes per second of the unit, one byte is equal to 8 bits, that is, 1k = 8b

That's the problem. Because the phone is used as a cat, it is normal for the network to be slow. It is recommended to use a signal receiving amplifier to receive, which is definitely better than a mobile phone.

The 4MB network cable is up to more than 400KB per second, and it is almost normal for you to open it, so it is recommended that you open 8MB

It has to do with file size, computer configuration, and network all the time, and there is nothing you can do.

It's all the same thing.

150k s is 150kb s