How to clean stainless steel basins and how to clean newly bought stainless steel basins?

Dust and easily remove dirt soap, weak lotion or wash with warm water.

Labels and films are scrubbed with lukewarm water, mild detergent, and alcohol or organic solutions are used for binder ingredients.

Fat, oil, lubricating oil contamination Dry with a mild cloth or paper and wash with a neutral detergent or ammonia solution or special detergent.

Bleach and seed acid adhesion Rinse immediately with water, soak in ammonia or neutral carbonated soda solution, and then wash with neutral detergent or lukewarm water.

Organic carbide attachment is soaked in a hot neutral detergent or ammonia solution and then washed with a detergent containing a weak abrasive.

Fingerprints are dried with alcohol or organic solvents (benzene) and washed with a soft cloth before washing.

Rainbow stripes are caused by excessive use of detergents or oils, and use warm water neutral detergents when washing.

Welding is heated and discolored, washed with 10% nitric acid or hydrofluoric acid solution, and then neutralized with ammonia, carbonated soda, and then washed with water or specially washed for chemical use.

Rust caused by surface contaminants Wash with nitric acid (10%) or abrasive detergents or use special detergents.

Stainless steel basins, how to clean them? If stainless steel basins. When it's dirty. To use a wire brush. Dip some cleansers. The brush is clear and clean. Rinse with clean water. As new.

If you want a stainless steel basin with a long service life, you must know how to maintain it. Usually remember not to wipe the stainless steel tank with a hard object such as steel wool balls. When grease is found, you can use diluted vinegar and a rag to wipe it off.

If there is limescale, you can use vinegar or toothpaste to scrub the scale first, repeat it several times, and then rinse with water. These two methods are the safest and most effective.

Wash with hot water and dish soap, and then rub with a steel wool ball.

Hello! The cleaning steps are as follows: 1. Add an appropriate amount of warm water to the stainless steel basin, then drop in a few drops of white vinegar, and soak for about ten minutes; 2. After soaking, drop in dish soap, scrub with a rag, and then rinse with water.

1. The stainless steel basin is rinsed with hot water for the first time, and the oil stains on the top can be cleaned with dish soap, if you really want to wash it well, put it in the pot and boil it with boiling water, so that the oil stains on the packaging are completely clean.

2. If it is convenient, rub it with wet cornmeal, or rub it with clean fine sand, and then wash it with water.

For anything, we will first remove most of the stains when cleaning, and the common methods are rinsing or wiping, and the stainless steel we are going to talk about today is to choose the wiping method to wipe off most of the dust on the surface of the stainless steel, so that the stainless steel looks relatively clean as a whole. Stainless steel cleaning step 2: Most of the stainless steel basins in our home are washed by water, but because of this, the stainless steel basins in our home will always leave some traces after the water stains are dry, which shows that stainless steel is not suitable for washing with water, which not only does not clean the stainless steel, but also damages the gloss of stainless steel in the long run.

So how should our stainless steel be washed? Stainless steel cleaning step 3: The best tool for cleaning stainless steel is a rag and stainless steel oil, after the first step, we pour stainless steel oil on the rag (note:

Don't use too much stainless steel oil, otherwise it will leave marks), and then wipe back and forth on the stainless steel object until all the stains are removed. Stainless steel cleaning step 4: After this step is completed, we can take a clean rag and continue to wipe back and forth on the stainless steel item (Note:

No need to apply stainless steel oil anymore), until the stainless steel oil is wiped clean and the stainless steel items become brighter, which basically completes the entire cleaning work, if you still find that there is a blooming phenomenon, you should immediately repeat the above steps, know to wipe clean.