What should I do if I can t clean the pot? What should I do if I didn t wash the pot before boiling

Updated on home 2024-06-29
10 answers
  1. Anonymous users2024-02-12

    1. Soak it in hot water, it is easy to wash it, do not use a steel wool ball brush, it will damage the pot, if it is an aluminum pot brushed and then used to cook rice is very bad for the body. (If you must brush, you can use a coarse cloth instead of a steel wool ball).

    2. The red in the mountains can be used to paste the bottom of the pot.

    If the bottom of the pot is battered for cooking rice and stir-frying, you can put a few mountain red in the pot, add a little cold water and boil (do not boil dry), and the bottom of the pot will be removed soon.

    3. Remove the tomatoes from the bottom of the pot.

    A few not very good tomato squares are cooked in a pot and will naturally fall.

    4. Peel the apple or pear peel to paste the bottom of the pot.

    Boiled with apple or pear peel with a little water, and then it will be easy to clean.

    5. Remove the oranges from the bottom of the pot.

    Cut a few slices of oranges and boil them in a pot, let them simmer overnight, and the next day the paste will turn over and it will be easy to remove.

    6. Waste ** card, magnetic card wash and paste pot.

    Use a card along the edge of the pan to gradually scrape off the charred scale. Note that you don't need to use too much force when scraping. If the card is made of rigid plastic, it can also be used to scrape dirt on the gas stove.

    7. Add a little vinegar, heat the water and boil it, and it will be washed off.

    8. Dry burn over low heat for a while, sprinkle salt when smoking, turn off the fire after shaking for a minute, and then wipe it again, you can remove it very cleanly, without leaving the bottom and the mushy smell.

    9. Add laundry detergent with a cleaning ball.

    You can directly wipe off the part of the bottom of the pot that has turned black.

    When the pot in which the rice is cooked is pasted, pour the cola into the pasted aluminum pot, and then boil it on the fire, and the paste will come down. When the pot for stir-frying is paste, heat it with salted water, then brush it with a brush, and rinse it with water.

  2. Anonymous users2024-02-11

    If you find dirt on the pressure cooker, you can cut the used toothpaste skin along one side, hit it flat with a hammer, and keep the remaining toothpaste on it, then wipe the surface of the pot directly with the moistened toothpaste skin, and finally rinse the toothpaste and dirt together with clean water. You can also apply a little vinegar to the stain, wait for a while, and then scrub it with water.

  3. Anonymous users2024-02-10

    Baking soda removes grease.

    For lighter grease scales, baking soda can be used. Wet the iron pot, then smear the baking soda on the grease and dirt, and then wrap the whole pot with plastic wrap and leave it overnight, so that the baking soda can fully contact the grease of the pot, and the next day tear off the plastic wrap and wash it directly with a cleaning cloth, the effect is obvious.

  4. Anonymous users2024-02-09

    At this time, you can brush the pot with a steel wool ball, which is better, rinse with hot water, which can make the pot cleaner.

  5. Anonymous users2024-02-08

    Should buy some detergent. Blanch the pot to the bowl with hot water to remove some of the grease, and then put it in the pot to scrub.

  6. Anonymous users2024-02-07

    What should I do if I didn't wash the round pot before boiling! Hello, I'm glad to solve the collapse of the car type for you<> you can deal with it if you don't wash the pot before boiling First of all, after removing the impurities on the surface of the iron pot, put the iron pot on the pot again, turn off the heat when the pot starts to smoke, and then pour a spoonful of oil or lard into the pot and slide the oil with a spoon to let the oil evenly moisten the pot, and then ** burn the oil until it smokes, turn off the heat. After turning off the heat, pour out the oil, and then use hot water and dish soap to wash the grease and impurities on the surface of the pot.

    A pot is a cooking utensil, which can be used to cook, boil, fry, fry, and fry food. The pot has a long history of use and is an indispensable tool in Chinese cooking, which can replenish trace amounts of iron in the human body. I hope I can help you <>

    Do you have any questions about its rental?

  7. Anonymous users2024-02-06

    The waste pot is the foundation of the meal, so as to take its return and support, and the waste pot can be sold to the waste collector. Iron pots are traditional kitchen utensils for cooking food, which generally do not contain toxic substances, but they will oxidize after a long time when exposed to water. The main varieties of iron pans are printing pots, ear pots, frying pans, oil pans, pancake pans, etc.

    The main component is iron, but it also contains small amounts of sulfur, phosphorus, manganese, silicon, carbon, etc. Ordinary iron pots are prone to rust, and the human body absorbs too much iron oxide.

    It can be harmful to the liver. <

    The waste pot meal is the basis for taking what it has to be raised, and the waste pot can be sold to the waste collector. Iron pots are traditional kitchen utensils for cooking food, which generally do not contain toxic substances, but they will oxidize after a long time when exposed to water. The main varieties of iron pans are printing pots, ear pots, frying pans, oil pans, pancake pans, etc.

    The main component is iron, but it also contains small amounts of sulfur, phosphorus, manganese, silicon, carbon, etc. Ordinary iron pots are easy to rust, and the human body absorbs too much iron oxide, that is, after rust, it will cause harm to the liver, so people need to abide by some principles of use when using iron pots in order to be beneficial to health.

  8. Anonymous users2024-02-05

    We use a pot to stir-fry vegetables with oil, so that the vegetables can be cooked and fragrant. Sometimes if the vegetable oil we fry is relatively fishy, we should pay attention to washing it several times when cleaning, so as not to leave too much oil stains, which will form grease after a long time, and it is not easy to clean. So how to wash the pan when the oil in the pan is too large?

    It can be treated with rice washing water, which has a strong ability to remove oil stains. When cleaning the pot, pour the rice washing water into the pot and scrub it with a steel wool ball. After that, you can rinse the dishes with tap water. This method will be cleaner and more hygienic than dish soap.

    You can also sprinkle a mixture of baking soda and water and use a brush to scrub the greasy area. After 10 minutes, you can easily rinse off the grease with clean water.

    This situation is normal, especially the pan of the stir-fry will be a little greasy. This is usually because the oil stain was not completely washed off during the last cleaning, so there will be residue. If it is an iron pot for stir-frying, you don't have to worry, such an iron pot is not easy to oxidize and rust, and because there is a layer of ink on the surface of the pot when stir-frying, it is not easy to stick to the pan.

    1.Dip in white vinegar. After stir-frying, roughly clean the iron pan, then pour in water and add five tablespoons of white vinegar.

    Once stirred thoroughly, set aside to soak for about 20 minutes. When the time is up, clean the bottom of the pot with clean water, and finally wipe the bottom of the pot with a dry cloth.

    2.If you use an iron pot at home, you can use the method of burning the bottom of the pot. ** After that, slowly heat the bottom of the pan over low heat. After about ten minutes, turn off the stove and use a spatula to clean the rust from the bottom of the pan and clean it with a stainless steel ball.

  9. Anonymous users2024-02-04

    First, put water in the pot, add baking soda, and bring to a boil over medium heat without a lid; Stop the fire after the water boils and let the water cool; Drain the water and scrub the stain with a sponge, then use dish soap to remove the oil, and finally scrub it off with clean water. <

    1. First put water in the pot, add baking soda, and bring to a boil over medium heat without covering;

    2. Stop the fire after the water is boiled and let the water cool;

    3. Drain the water and scrub the stain with a sponge, then remove the oil with dish soap, and finally scrub it with clean water.

  10. Anonymous users2024-02-03

    Summary. Hello! The other party said that the pot has not been washed yet, what should I do?

    You can say, it's okay, I'll wash the pot, rest assured, I promise to wash the pot clean, and don't delay the use!

    The pot hasn't been washed yet, how to reply.

    Hello! The other party said that the pot has not been washed yet, what should I do? You can say, it's okay, I'll wash the pot, rest assured, I promise to wash the pot clean, and don't delay the use!

    Hello! The other party said that the pot socks were not washed, what should I do? You can say, it's okay, I'll wash the pot, rest assured, I promise to wash the pot clean, and don't delay the use! Do you think this is the right way to reply?

    This is a reply to Tik Tok.

    Not very cooked. Any other responses.

    Any other responses.

    Yes, you can also reply, as long as you and I will come and help you wash the pot.

Related questions
41 answers2024-06-29

Put the pressure cooker first.

Soak it in hot water, then drop a few drops of vinegar into it and mix it well, and clean the burnt area in the pot with a brush to remove the burnt part of the pot. >>>More

13 answers2024-06-29

1. Before stir-frying, you must ensure that the pot is cleaned, and do not fry other dishes before stir-frying, so that it is easy to stick to the pan due to the residue of the previous dish. >>>More

16 answers2024-06-29

Tools Raw materials.

Car cleaning, surface dirt cleaning. >>>More

16 answers2024-06-29

It's too annoying that the pot can't be washed, so teach you a trick to do so without using your hands and rinsing it directly with water.

7 answers2024-06-29

Reason 1: The flange interface is installed when it is biased, and the sewer flow rate is reduced. >>>More