After the refrigerator is turned upside down, it is now not working

Updated on home 2024-06-22
7 answers
  1. Anonymous users2024-02-12

    The use of the refrigerator should meet the following requirements:

    1. The temperature in the refrigerator should be kept below 10.

    2. Infant food should be freshly prepared and should not be placed in the refrigerator.

    3. The remaining food should be fully reheated and cooked thoroughly before being stored in the refrigerator to kill microorganisms and be stored at room temperature.

    4. In order to prevent cooked crossover and food "cross-flavor", the food should be packed tightly in a fresh-keeping bag or plastic wrap and stored in the refrigerator.

    5. Frozen meat and poultry should be thoroughly thawed before cooking, and then fully and evenly heated and cooked thoroughly. If some parts are not completely thawed, the regular cooking temperature is not enough to kill microorganisms. Frozen meat and fish should not be kept in the refrigerator again as the food may be contaminated during the thawing process and microorganisms will multiply rapidly.

    6. The refrigerator should be defrosted and cleaned regularly to keep it clean.

    The refrigerator needs to be cleaned frequently in the following aspects:

    1. There are more than a dozen kinds of microorganisms on the sealing strip on the refrigerator door, and the existence of these microorganisms can easily lead to various diseases in humans. The cleaning method is to wipe the sealing strip with a dry cloth soaked in alcohol, and the effect is the best.

    2. Frequently remove the odor in the refrigerator. If the refrigerator is used for too long and is not cleaned in time, there will be an unpleasant odor, which is caused by the mixing of various items in the refrigerator. If you want to completely remove odors, you should try to eat as soon as you buy and eat, and do not store the contents of the refrigerator for too long.

    If the storage time is too long, it will not only affect the freshness of the food, but also easily produce peculiar smell. Therefore, it is best to store the goods for no more than a month.

    3. Clean up leftovers in the refrigerator frequently. It can be said that there are leftovers in the refrigerator of every family, which is easy to make the items in the refrigerator smell; On the other hand, the refrigerator is not a sterile room, and leftovers are easily eroded by various bacteria. Therefore, leftovers from the refrigerator should be eaten as soon as possible, and be sure to heat them up before eating.

    β€”It's not easy to type, it's not easy to upgrade, and it's not easy to see and cherish --

    β€” If you find it useful, I hope you have --- answer

    - I hope that you will have a new day, all your wishes come true, your work will go well, and your life will be happy and --β€” happy

  2. Anonymous users2024-02-11

    Looking for after-sales service repair, basically you can consider buying a new one.

  3. Anonymous users2024-02-10

    The general method is to place the refrigerator correctly for more than 4 hours, so that the internal pressure is balanced and the lubricating oil flows back before turning it on.

    In general, in order to reduce the working noise, the compressor motor is suspended by three hanging springs, if the refrigerator is lifted upside down or tilted excessively during handling, the lubricating oil will flow into the refrigeration system above the compressor and motor.

  4. Anonymous users2024-02-09

    It is not recommended to turn the refrigerator upside down, as this may cause the liquid refrigerant inside the refrigerator to lose or enter the improper position, affecting the normal use of the refrigerator and increasing the maintenance cost. What to do if you've turned your fridge upside down, here are some ways to do it:

    1.Wait a while: If you are only inverting the refrigerator for a short time, especially if it is tilted on its side, be careful to wait for a few hours or several angels to reset. If necessary, the necessary components can be disassembled to facilitate quick recovery.

    2.Adjust the position of the refrigerator: Depending on the model of the refrigerator and the size of the indoor space, it may be necessary to move the refrigerator to the appropriate outlet and leave the minimum space it requires.

    3.Check the refrigeration effect of the refrigerator: After turning on the refrigerator, check whether the refrigeration effect of the refrigerator and the noise of objects are abnormal. If you find a problem, you need to turn off the power immediately and seek a professional for service.

    4.Disassemble and replace damaged parts: If the refrigerator is seriously damaged due to inversion, such as causing pipes, fans, compressors and other parts to fall off, damaged or leak, you should have a professional inspect and disassemble, replace or reconstruct the relevant parts and pipes in time.

    It is best to prevent this by emptying the inside, removing food and beverages, and opening the screws on the bottom of the refrigerator to ensure that it is securely secured before moving or moving the refrigerator. It should be noted that during the handling process, it must be operated carefully to avoid the impact of external forces such as impact and vibration on the rubber width of the refrigerator caused by swelling and deformation during the movement, and keep it as horizontal as possible to ensure safe and normal use.

  5. Anonymous users2024-02-08

    Once the refrigerator is turned upside down, it is not advisable to power it on immediately as this will damage the refrigerator's compressor. The correct way to deal with it is:

    Place the refrigerator on a flat floor to make sure the refrigerator is stable.

    Wait 4 hours for the spine to equalize the pressure inside the refrigerator and the lubricating oil flow back to the compressor.

    Inspect the bottom of the refrigerator to see if the compressor has leaked or rinse the outside of the refrigerator with hot water to release compressed air.

    Finally, open the refrigerator and use it with electricity.

    If the above methods do not work, it is recommended to contact a professional repairer to check the damage to the refrigerator.

  6. Anonymous users2024-02-07

    After the refrigerator is turned upside down, it needs to be upright for three or four hours before it can be plugged in and used again.

  7. Anonymous users2024-02-06

    Categories: Life >> common sense of life.

    Analysis: It's better not to! However, if you have to be horizontal, don't tilt more than 30 degrees. Please take a look at the following information of Hengpi:

    On the bottom inside the back wall of the refrigerator, there is a compressor, and there is some lubricating oil at the bottom of the compressor as well as inside the housing of the electric motor. If the electric ice rubber sliding box, upside down lifting or excessive tilting during handling, the lubricating oil will flow into the refrigeration system above the compressor and motor, which will hinder the circulation of Freon in the refrigeration system and affect the normal operation of the refrigeration system. Another point is that if the refrigerator is placed upside down, it will cause the decoupling of the shock absorbing spring in the compressor to be poor, and the refrigerator will not operate normally.

    So, that's why we can't turn the refrigerator upside down or tilt it too much when we move the refrigerator.

    Because the refrigerator is a relatively delicate electrical appliance, its internal devices, such as copper and aluminum connectors, and external components, such as the condenser on its back, are easily damaged if they are subjected to violent vibrations. Therefore, during the handling process, it is best to have two or three people grasp the refrigerator with both hands, lift it from the bottom, move it smoothly, and be sure to move it gently. Doorknobs and condensers are on the outside of the refrigerator, but they should not be grabbed as a focal point, otherwise they will be damaged.

    When handling, it is necessary to prevent the box from being damaged.

    On the bottom inside the back wall of the refrigerator, there is a compressor, and there is some lubricating oil at the bottom of the compressor as well as inside the housing of the electric motor. If the refrigerator is lifted upside down or tilted excessively during handling, the lubricating oil will flow into the refrigeration system above the compressor and motor, which will hinder the circulation of Freon in the refrigeration system and affect the normal operation of the refrigeration system. Another point is that if the refrigerator is placed upside down, it will cause the decoupling of the shock absorbing spring in the compressor, and the refrigerator will not be able to operate normally.

    So, that's why we can't turn the refrigerator upside down or tilt it too much when we move the refrigerator.

Related questions
18 answers2024-06-22

1.When the refrigerator does not work, you should first check whether the connection of the power supply is normal, check whether the light in the refrigerator is normal, and you can also use an electric pen for further testing. >>>More

21 answers2024-06-22

1. Check whether the power supply of the refrigerator is plugged in or whether the power supply of the refrigerator is loose, the refrigerator is not well connected to the power supply, and the compressor of the refrigerator cannot be started. 2. It may be that the motor unit of the compressor is burned out, and the problem that will occur at this time is the fuse of the compressor. >>>More

2 answers2024-06-22

I'm a post-90s generation but I'm still in school, so I don't know too much, but my old cousin is a post-00s, and Yining has been working for two years, so let's talk about my feelings from their changes. >>>More

8 answers2024-06-22

Calmly, the school wants you to be self-reliant.

17 answers2024-06-22

If there is a white screen failure, it is basically certain that there are more problems with the power supply circuit of the LCD screen, that is, the poor voltage. >>>More