The kitchen is too damp and easy to mold, what should I do?

1. Use dehumidifiers.

The room is damp and desiccant can be used.

Activated carbon, moisture-proof, moisture-absorbing. Desiccants and activated carbon can be used.

There are many desiccants in supermarkets that are specially used for moisture-proof and dehumidification, and the most common are two types: moisture absorption boxes and dehumidification bags.

2. Buy an air dehydrating breather.

It's like a vacuum cleaner that can concentrate wet air and turn it into water a lot of the time. Dehumidify with air conditioning. Air conditioners used in the home generally have the function of dehumidification, however, air conditioners regulate the humidity of the indoor air.

It is slower, usually takes two or three hours, and can make people feel cold indoors.

3. Use lime and bamboo charcoal to dehumidify.

Use a small cloth bag to pack an appropriate amount of lime, tie it into a small bag and place it in all corners of the room, the lime itself has the effect of moisture absorption, and can also slow down the indoor damp situation, at the same time, lime also has the effect of disinfection, killing two birds with one stone. Bamboo charcoal dehumidification can be used repeatedly, but the more it is used, the less the effect is not very good.

4. In the outside worldHeavy moistureWhen the doors and windows should be closed, moisture-proof.

In normal times, windows should be opened more for ventilation to reduce indoor water vapor.

Content. Especially in newly renovated houses, the moisture is particularly high, and it is necessary to ventilate more to remove moisture.

1. For rooms where doors and windows can be closed, the use of desiccant can effectively dehumidify. Quicklime is a very effective dehumidifier, but quicklime can only be used once and is corrosive. If you have the conditions, you can buy a desiccant that can be used repeatedly, which can save costs and have a good effect, and then dry it with fire or in the sun after use, and then continue to use it for dehumidification.

2. If possible, install an air dehumidifier to dehumidify the room. The air dehumidifier is divided into intelligent and non-intelligent type, and the non-intelligent type is low, once it is started, it will not stop working, which is likely to lead to excessive drying of the air in the closed room, and the intelligent dehumidifier can set the air humidity.

3. If there is no dehumidifier and dehumidifier, you can use a fine-porous sponge or thick cotton cloth and other absorbent fabrics to spread on the walls and floors with strong water.

4. For the rainy season and summer rain tide, simple dehumidification is not a fundamental method, as long as the outdoor moist air flow enters the room, the room will still be constantly humid. Therefore, in order to prevent humidity caused by the climate, it is best to close the doors and windows during the rain tide to reduce the convection of warm and humid air indoors and outdoors.

5. If the humid water vapor source comes from the room, then try to seal the water container with various open openings as much as possible to prevent water evaporation, and do not place all kinds of wet items indoors. If you have to place an open water container or wet items indoors, in order to reduce the humidity, you can install an exhaust fan in the room to expel the humid air from the room.

6. Some houses are damp due to the environment, and they are so humid all year round, so they can only be dehumidified with a dehumidifier all year round. There are also some rooms that are prone to moisture due to unreasonable design and decoration, in this case, if you have the ability and conditions to renovate and redecorate, it is best to renovate to enhance the ventilation capacity, and use moisture-proof materials for moisture-proof decoration of walls, ceilings and floors.

Whether it is tableware or kitchenware, as long as the mold is not too serious, it can be used after cleaning and disinfection. However, if it is a wood product, it will leave some dull marks after mold, which will affect the appearance.

What to do if the tableware is moldy.

1. Ceramic, stainless steel, metal tableware.

Even if there is mold on these tableware, we can directly scrub it clean, cook it again to sterilize, and then we can continue to use it. These things themselves do not nurture the weight of the mold, nor do they absorb moisture, so just wash and dry to avoid mold again. After the iron pot is moldy or rusty, scrub it clean, boil it, then pour out the water, bake the pot dry over low heat, and smear some cooking oil on the surface, and it will be as clean as new.

2. Wooden utensils.

For example, if your chopsticks and cutting board are made of wood, it will be easy to grow mold, and these things will grow mold even after washing. In addition to washing off food residues as soon as possible and washing them clean enough, it is also necessary to control drying or blow drying. It is better to store the chopsticks with the head up, which is conducive to timely air drying, and do not put them flat next to each other in the box.

Buy a sterilizer for storage. The cutting board is also placed vertically, and it is brushed clean and dried in time. Cleaning with a plastic cutting board is relatively simple, and bamboo and wood cutting boards can scrape off sticky parts of the surface.

It is inevitable that there will be some food debris and juice on the cutting board, and even if you blow dry, it will absorb moisture and grow mold again. Therefore, in addition to washing the cutting board frequently and blowing it frequently, you can also spray a little alcohol on the surface to play a role in sterilization and antibacterial.

How to prevent mold growth in kitchen utensils.

In addition to washing off the food residue as soon as possible and washing it clean enough, it is also necessary to control or blow dry the moisture on it to prevent mold from surviving.

When storing, the chopsticks should be erected with the head facing up, which is conducive to timely air drying, do not put a handful next to each other in the box, if you can buy a sterilizer to store it, it will be more assured.

The cutting board should also be placed vertically, brushed and dried in time. If you use a plastic cutting board, it is easier to clean, and if you use a bamboo or wood cutting board, you can scrape off the sticky parts of the surface.

The first method is very simple, it is to use the usual method, but it is very troublesome, you should clean it carefully every day, use dish soap or laundry detergent to clean the cupboard, and then dry it. If you can't brush it off, even if you still leave obvious plaque after brushing, you can use a mold remover to treat it, and the mold remover can go deep into the cupboard to decompose the mold and the pigment secreted by the mold, and dry it, be sure to dry it.

After the mold is cleaned, in order to prevent the cupboard from becoming moldy again, you can use an anti-mold and antibacterial spray to spray it, so that the cupboard has a certain anti-mold and antibacterial ability. For new cupboards, be sure to confirm whether they are dry enough before using them, to avoid the inside of the cupboard being too wet and causing mold in the later stage, and then place a drying bag in the corner of the cupboard, whose hygroscopic effect can keep the cabinet dry, so that the cupboard will not become moldy.

1. Ventilation is exchanged with the dry air outside through the convection of the air, so as to reduce the moisture-proof purpose of the spike front room and the room, the measure is to open the window or install the exhaust fan, the window opening time is also particular, it needs to be from 10 am to 5 pm in this time period, because the air in the morning and evening is also more humid, the disadvantage of this method is: when the outside air is also humid or rainy weather, it can not achieve the purpose of moisture-proof.

2. Desiccant That is, by purchasing desiccant (such as lime powder, charcoal, chemical hygroscopic products, etc.), guess the desiccant is placed in the room that needs to be moisture-proof, and through the adsorption function of the desiccant, it absorbs the water vapor in the air and makes the air dry. Its disadvantage is that the speed is slow, and when the desiccant is adsorbed to a saturated state, there is no moisture absorption function, and it needs to be cared for and replaced frequently.

3. Dehumidifier moisture-proof Dehumidifier is an electrical product specially designed to improve the humid environment, which can separate the moisture in the air from the air and turn it into water drainage.

The cabinet has mildew marks, if not removed in time, the cabinet will be moldy again, and will form a mark that cannot be removed, you can use a soft brush to brush it clean, and then wipe it clean with alcohol. After the surface mold is cleaned, paint or wax the moldy area is brushed to isolate the air in the area where the mold grows and prevent it from growing again. <

1. The cabinet has mildew marks, if it is not removed in time, the cabinet will become moldy again, and it will form a mark that cannot be removed, which can be brushed with a soft brush and then wiped clean with alcohol.

2. After cleaning the surface mold, brush a layer of paint or wax on the moldy place, the purpose is to isolate the air where the mold grows and prevent it from growing again.

How to prevent mold in the kitchen: 1. Dehumidification and anti-mildew supplies for mold removal supplies: Anti-mildew cleaning or dehumidifier is necessary at home, which can dehumidify and prevent mildew from the corners of the cabinets at home anytime and anywhere.

Place the boxed dehumidifier and keep the inside dry. In addition, you can also use multi-functional disinfectants, antifungal and antibacterial agents on walls, floors, bathrooms, etc., to easily clean and sterilize.

2. Keep the cabinets dry: The primary cause of moldy cabinets may be that the cabinets are too damp. Keeping your cabinets dry is the first law that will never change. Always pay attention to the ventilation effect of the kitchen, remove the waste in the cabinets frequently, and keep the cabinets clean.

3. Brush out the mold-free space: choose paint with a special antibacterial and anti-mildew formula to paint the home wall, which can effectively prevent mold germination and resist the growth of harmful bacteria, and make the dirt not easy to adhere, resistant to scrubbing, suitable for bathrooms, kitchens, basement walls and other places where the walls are easy to be wet.

If there are small mildew spots on the light-colored countertop, then we don't use water, first let it ventilate and dry, then use an emery pad cloth to remove the mildew, and then wash it with water and dry it.

If there are eyebrow spots on the dark countertop, then we can take a semi-wet sponge to wipe the mold spots on the surface first, if it can't be wiped off, it is recommended to add a professional kitchen stain remover for a second cleaning, and finally rinse it off to keep it dry.

You can also use a solution of white vinegar and water to wipe down kitchen countertops, because white vinegar is also very good at sterilization, it can also be used to remove mold and stains, and it can clean up moldy areas on kitchen countertops.

We can also use bleach to treat the moldy area with bleach, then dry it, and finally apply a film to maintain it, which can prevent warm or sharp things from being placed on the countertop and damaging the kitchen countertop.

Cabinets are important furniture in the kitchen, playing the role of storage, now they are generally custom cabinets, the most likely problem of cabinets is moisture and mold, especially the cabinets under the washing basinWhat about the resurgence of moisture and mold in the kitchen cupboards? What is the fastest way to deal with damp and moldy in the kitchen? Let's find out!

1. For rooms where doors and windows can be closed, the use of desiccant can effectively dehumidify. Quicklime is a very effective dehumidifier, but quicklime can only be used once and is corrosive. If you have the conditions, you can buy a desiccant that can be used repeatedly, which can not only save costs, but also play a good role.

After use, dry it over fire or in the sun, and continue to dehumidify.

2. If possible, install an air dehumidifier to dehumidify the room. Air dehumidifiers are divided into intelligent and non-intelligent types. Non-intelligent** is inexpensive.

Once started, it doesn't stop working, which can lead to excessive drying of the air in a closed room. The intelligent type can be set to air. Humidity, therefore, when using non-smart phones, pay attention to turning on and off in time, and use smart phones as economically as possible.

3. If there is no dehumidifier and dehumidifier, you can use a fine-porous sponge or thick cotton cloth and other highly absorbent fabrics to spread on the walls and floors with a large moisture bond. When the fabric is regularly filled with water, take it out and wring it out and dry it in the air, then place it on a dry absorbent material.

4. For the rainy season and summer rain tide, simple dehumidification is not the fundamental method. As long as the damp air flow from outside enters the room, the room will remain damp at all times. Therefore, in order to prevent humidity caused by the weather, it is best to close the doors and windows tightly when it rains to reduce the convection of warm and humid air indoors and outdoors.

Manuscript Song Potato. 5. If the damp water vapor comes from the room, it is necessary to tightly seal and cover all kinds of open water containers to prevent water evaporation, and do not place all kinds of damp objects indoors. If an open water container or a damp object must be placed indoors, in order to reduce humidity, an exhaust fan can be installed indoors to expel the humid air from the room outside.

What should I do if there is resurgence of moisture and mold in the kitchen cupboards? What is the fastest way to deal with damp and moldy in the kitchen? ?The above is the relevant content we introduced, the kitchen is a place where the water is relatively humid and easy to accumulate water, so it is best to buy cabinet plates with good waterproofness, pay attention to cleaning and maintenance, and deal with water seepage problems in time.